[PATCH 2/3] serial: qcom-geni: Use resources helper APIs in runtime PM functions

[Praveen Talari <praveen.talari@oss.qualcomm.com>]

To manage GENI serial engine resources during runtime power
management, drivers currently need to call functions for ICC, clock,
and SE resource operations in both suspend and resume paths, resulting
in code duplication across drivers.

The new geni_se_resources_activate() and geni_se_resources_deactivate()
helper APIs addresses this issue by providing a streamlined method to
enable or disable all resources based, thereby eliminating redundancy
across drivers.

Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
---
 drivers/tty/serial/qcom_geni_serial.c | 72 +++++++++--------------------------
 1 file changed, 18 insertions(+), 54 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 4f34eef15598..17735c940541 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -115,7 +115,8 @@ struct qcom_geni_device_data {
 	enum geni_se_xfer_mode mode;
 	int (*resources_init)(struct geni_se *se);
 	int (*set_rate)(struct uart_port *uport, unsigned int baud);
-	int (*power_state)(struct uart_port *uport, bool state);
+	int (*power_on)(struct geni_se *se);
+	int (*power_off)(struct geni_se *se);
 };
 
 struct qcom_geni_private_data {
@@ -1658,47 +1659,6 @@ static struct uart_driver qcom_geni_uart_driver = {
 	.nr = CONFIG_SERIAL_QCOM_GENI_UART_PORTS,
 };
 
-static int geni_serial_resources_on(struct uart_port *uport)
-{
-	struct qcom_geni_serial_port *port = to_dev_port(uport);
-	int ret;
-
-	ret = geni_icc_enable(&port->se);
-	if (ret)
-		return ret;
-
-	ret = geni_se_resources_on(&port->se);
-	if (ret) {
-		geni_icc_disable(&port->se);
-		return ret;
-	}
-
-	if (port->clk_rate)
-		dev_pm_opp_set_rate(uport->dev, port->clk_rate);
-
-	return 0;
-}
-
-static int geni_serial_resources_off(struct uart_port *uport)
-{
-	struct qcom_geni_serial_port *port = to_dev_port(uport);
-	int ret;
-
-	dev_pm_opp_set_rate(uport->dev, 0);
-	ret = geni_se_resources_off(&port->se);
-	if (ret)
-		return ret;
-
-	geni_icc_disable(&port->se);
-
-	return 0;
-}
-
-static int geni_serial_resource_state(struct uart_port *uport, bool power_on)
-{
-	return power_on ? geni_serial_resources_on(uport) : geni_serial_resources_off(uport);
-}
-
 static void qcom_geni_serial_pm(struct uart_port *uport,
 		unsigned int new_state, unsigned int old_state)
 {
@@ -1964,25 +1924,27 @@ static void qcom_geni_serial_remove(struct platform_device *pdev)
 static int __maybe_unused qcom_geni_serial_runtime_suspend(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
-	struct uart_port *uport = &port->uport;
-	int ret = 0;
 
-	if (port->dev_data->power_state)
-		ret = port->dev_data->power_state(uport, false);
-
-	return ret;
+	return port->dev_data->power_off ?
+	       port->dev_data->power_off(&port->se) : 0;
 }
 
 static int __maybe_unused qcom_geni_serial_runtime_resume(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
-	int ret = 0;
+	int ret;
+
+	if (port->dev_data->power_on) {
+		ret = port->dev_data->power_on(&port->se);
+		if (ret)
+			return ret;
+	}
 
-	if (port->dev_data->power_state)
-		ret = port->dev_data->power_state(uport, true);
+	if (port->se.has_opp && port->clk_rate)
+		return dev_pm_opp_set_rate(uport->dev, port->clk_rate);
 
-	return ret;
+	return 0;
 }
 
 static int qcom_geni_serial_suspend(struct device *dev)
@@ -2040,7 +2002,8 @@ static const struct qcom_geni_device_data qcom_geni_console_data = {
 	.mode = GENI_SE_FIFO,
 	.resources_init = geni_se_resources_init,
 	.set_rate = geni_serial_set_rate,
-	.power_state = geni_serial_resource_state,
+	.power_on = geni_se_resources_activate,
+	.power_off = geni_se_resources_deactivate,
 };
 
 static const struct qcom_geni_device_data sa8255p_qcom_geni_console_data = {
@@ -2056,7 +2019,8 @@ static const struct qcom_geni_device_data qcom_geni_uart_data = {
 	.mode = GENI_SE_DMA,
 	.resources_init = geni_se_resources_init,
 	.set_rate = geni_serial_set_rate,
-	.power_state = geni_serial_resource_state,
+	.power_on = geni_se_resources_activate,
+	.power_off = geni_se_resources_deactivate,
 };
 
 static const struct qcom_geni_device_data sa8255p_qcom_geni_uart_data = {

-- 
2.34.1