From: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Subject: [PATCH v3 0/3] Enable mutliple peripherals in IPQ5210
Date: Thu, 23 Jul 2026 14:38:55 +0530 [thread overview]
Message-ID: <20260723-08-dts-v3-0-074eb131f382@oss.qualcomm.com> (raw)
This couple of patches enable mutliple peripherals like USB, PCIe etc.
Additionally, it enables CPUfreq and thermal tripping points.
Please refer to [1] for initial review comments on the PCIe related DT
changes.
1 - https://lore.kernel.org/linux-arm-msm/20260514-pci-ipq5210-v1-0-a09436200b35@oss.qualcomm.com/
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
Changes in v3:
- Address v2 comments
- Introduce RDP504 common dtsi and two board specific dts files one
for NAND and one for eMMC
- Move 'dr_mode' to board file instead of SoC file
- Dropped 'polling-delay-passive = 0' and 'polling-delay = 0'
- Use THERMAL_NO_LIMIT in 'cooling-device'
- '\n' before status = okay
- Removed 'num-lanes' from pcie0 & pcie1 nodes
- Link to v2: https://lore.kernel.org/r/20260715-08-dts-v2-0-b060b68e0256@oss.qualcomm.com
Changes in v2:
- Change usb3@8a00000 -> usb@8a00000
- Ignore other comments as they are covered in the following prerequisite
prerequisite-message-id: <20260514-icc-ipq5210-v1-0-b5070dfbe460@oss.qualcomm.com>
- Link to v1: https://lore.kernel.org/r/20260707-08-dts-v1-0-fce82e14cd1d@oss.qualcomm.com
---
Varadarajan Narayanan (3):
arm64: dts: qcom: ipq5210: Add nodes for multiple peripherals
arm64: dts: qcom: ipq5210: Introduce RDP504 common DT file
arm64: dts: qcom: ipq5210: Introduce RDP504 variant specific DT file
.../arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi | 209 +++++++
arch/arm64/boot/dts/qcom/ipq5210-rdp504-nand.dts | 17 +
arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 64 +--
arch/arm64/boot/dts/qcom/ipq5210.dtsi | 604 ++++++++++++++++++++-
4 files changed, 825 insertions(+), 69 deletions(-)
---
base-commit: 06a508eb73747a8a71bed89f5766226e433594c5
change-id: 20260706-08-dts-e830bb27c72b
prerequisite-message-id: <20260514-icc-ipq5210-v1-0-b5070dfbe460@oss.qualcomm.com>
prerequisite-patch-id: 0b6145b6635b18fe79fbbff5815041b43778c5ed
prerequisite-patch-id: 924c6ff7baf4283ac7991ee94c803a00fc5cece4
prerequisite-patch-id: c2fe1800fe769dccd37f94c19860a07f979e3c4c
prerequisite-message-id: <20260615085218.1421347-1-varadarajan.narayanan@oss.qualcomm.com>
prerequisite-patch-id: 66aa95814074faffb61393faa30396c42af41126
prerequisite-patch-id: 0a03dc1c91a2f0c03af823aa43f59a9005eb8607
prerequisite-message-id: <20260701-mailbox-v2-1-5e6ebc874e4e@oss.qualcomm.com>
prerequisite-patch-id: 956b405a71f384354b5c35a44b97a0a2dcf65eb3
prerequisite-message-id: <20260703-apss-clk-v3-0-4785e89a9c58@oss.qualcomm.com>
prerequisite-patch-id: d9efdd8a09b028b1343243c5f0e78cf3e8b1e253
prerequisite-patch-id: 36cf721e00f3f5bbc3ccdc0d39503c5899771085
prerequisite-patch-id: 35e083bb85434a34d86467e53b9eae14f78da125
Best regards,
--
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
next reply other threads:[~2026-07-23 9:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 9:08 Varadarajan Narayanan [this message]
2026-07-23 9:08 ` [PATCH v3 1/3] arm64: dts: qcom: ipq5210: Add nodes for multiple peripherals Varadarajan Narayanan
2026-07-23 9:08 ` [PATCH v3 2/3] arm64: dts: qcom: ipq5210: Introduce RDP504 common DT file Varadarajan Narayanan
2026-07-23 9:08 ` [PATCH v3 3/3] arm64: dts: qcom: ipq5210: Introduce RDP504 variant specific " Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723-08-dts-v3-0-074eb131f382@oss.qualcomm.com \
--to=varadarajan.narayanan@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®