From: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Subject: [PATCH v3 2/3] arm64: dts: qcom: ipq5210: Introduce RDP504 common DT file
Date: Thu, 23 Jul 2026 14:38:57 +0530 [thread overview]
Message-ID: <20260723-08-dts-v3-2-074eb131f382@oss.qualcomm.com> (raw)
In-Reply-To: <20260723-08-dts-v3-0-074eb131f382@oss.qualcomm.com>
RDP504 has USB, PCIe and SPI NAND devices populated. EMMC and NAND
share the GPIOs. The board has to be reworked to change from EMMC
to NAND variant. Rename ipq5210-rdp504.dts as ipq5210-rdp504-common.dtsi
and include it in variant specific DTS file.
Describe the fixed USB regulators, PCIe reset GPIOs, QPIC SPI NAND flash
and required pinctrl states. Enable QPIC BAM, USB and PCIe for the board.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
.../arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi | 209 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 79 --------
2 files changed, 209 insertions(+), 79 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi
new file mode 100644
index 000000000000..30c8560822b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "ipq5210.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ vreg_misc_3p3: regulator-usb-3p3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb_hs_vdda_3p3";
+ };
+
+ vreg_misc_1p8: regulator-usb-1p8 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdda_1p8_usb";
+ };
+
+ vreg_misc_0p925: regulator-usb-0p925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdd_core_usb";
+ };
+};
+
+&pcie0 {
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie0_port0 {
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pcie1_port0 {
+ reset-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ pinctrl-0 = <&qpic_snand_default_state>;
+ pinctrl-names = "default";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+};
+
+&qusb_phy_0 {
+ vdd-supply = <&vreg_misc_0p925>;
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+ status = "okay";
+};
+
+&sdhc {
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ pinctrl-0 = <&sdhc_default_state>;
+ pinctrl-names = "default";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&ssphy_0 {
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-supply = <&vreg_misc_0p925>;
+
+ status = "okay";
+};
+
+&tlmm {
+ pcie1_default_state: pcie1-default-state {
+ pins = "gpio29";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qpic_snand_default_state: qpic-snand-default-state {
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qspi_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio4";
+ function = "qspi_cs_n";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ clock-pins {
+ pins = "gpio5";
+ function = "qspi_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ qup_uart1_default_state: qup-uart1-default-state {
+ pins = "gpio38", "gpio39";
+ function = "qup_se1";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ sdhc_default_state: sdhc-default-state {
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "sdc_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ cmd-pins {
+ pins = "gpio4";
+ function = "sdc_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ clk-pins {
+ pins = "gpio5";
+ function = "sdc_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&qup_uart1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb3 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
deleted file mode 100644
index 941f866ecfe9..000000000000
--- a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
- */
-
-/dts-v1/;
-
-#include "ipq5210.dtsi"
-
-/ {
- model = "Qualcomm Technologies, Inc. IPQ5210 RDP504";
- compatible = "qcom,ipq5210-rdp504", "qcom,ipq5210";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-};
-
-&sdhc {
- max-frequency = <192000000>;
- bus-width = <4>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- pinctrl-0 = <&sdhc_default_state>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
-&tlmm {
- qup_uart1_default_state: qup-uart1-default-state {
- pins = "gpio38", "gpio39";
- function = "qup_se1";
- drive-strength = <6>;
- bias-pull-down;
- };
-
- sdhc_default_state: sdhc-default-state {
- clk-pins {
- pins = "gpio5";
- function = "sdc_clk";
- drive-strength = <8>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio4";
- function = "sdc_cmd";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "sdc_data";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&uart1 {
- pinctrl-0 = <&qup_uart1_default_state>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&xo_board {
- clock-frequency = <24000000>;
-};
--
2.34.1
next prev parent reply other threads:[~2026-07-23 9:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 9:08 [PATCH v3 0/3] Enable mutliple peripherals in IPQ5210 Varadarajan Narayanan
2026-07-23 9:08 ` [PATCH v3 1/3] arm64: dts: qcom: ipq5210: Add nodes for multiple peripherals Varadarajan Narayanan
2026-07-23 9:08 ` Varadarajan Narayanan [this message]
2026-07-23 9:08 ` [PATCH v3 3/3] arm64: dts: qcom: ipq5210: Introduce RDP504 variant specific DT file Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723-08-dts-v3-2-074eb131f382@oss.qualcomm.com \
--to=varadarajan.narayanan@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®