mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
@ 2026-07-28 15:44 Francesco Lavra
  0 siblings, 0 replies; only message in thread
From: Francesco Lavra @ 2026-07-28 15:44 UTC (permalink / raw)
  To: Minas Harutyunyan, Greg Kroah-Hartman, Felipe Balbi,
	Grigor Tovmasyan, John Youn, Vardan Mikayelyan, linux-usb,
	linux-kernel
  Cc: stable

When a USB host suspends a connected device, the DWC2 USB device controller
enters a partial power down state where controller registers are not
accessible. If the USB gadget is then disconnected or deactivated
(e.g. when a gadget function is unbound from the controller), the `pullup`
callback in struct usb_gadget_ops is invoked; if the controller is kept in
partial power down, the register write in dwc2_hsotg_core_disconnect() does
not take effect; as a result, the USB host keeps seeing the device as
connected, even though the device is disabled.

Properly exit partial power down state in the pullup callback, so that the
USB host detects a device disconnection as intended.

Fixes: 97861781daff ("usb: dwc2: Allow entering hibernation from USB_SUSPEND interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
---
 drivers/usb/dwc2/gadget.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index c8b02c27d27d..102169b40419 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4680,6 +4680,7 @@ static int dwc2_hsotg_pullup(struct usb_gadget *gadget, int is_on)
 {
 	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
 	unsigned long flags;
+	int ret = 0;
 
 	dev_dbg(hsotg->dev, "%s: is_on: %d op_state: %d\n", __func__, is_on,
 		hsotg->op_state);
@@ -4691,6 +4692,13 @@ static int dwc2_hsotg_pullup(struct usb_gadget *gadget, int is_on)
 	}
 
 	spin_lock_irqsave(&hsotg->lock, flags);
+	if (hsotg->in_ppd) {
+		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (ret) {
+			dev_err(hsotg->dev, "exit partial_power_down failed\n");
+			goto exit;
+		}
+	}
 	if (is_on) {
 		hsotg->enabled = 1;
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
@@ -4704,9 +4712,10 @@ static int dwc2_hsotg_pullup(struct usb_gadget *gadget, int is_on)
 	}
 
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+exit:
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 
-	return 0;
+	return ret;
 }
 
 static int dwc2_hsotg_vbus_session(struct usb_gadget *gadget, int is_active)
-- 
2.39.5


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-07-28 15:44 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-07-28 15:44 [PATCH] usb: dwc2: gadget: Exit partial power down state when changing USB pull-up Francesco Lavra

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®