From: Honghui Jiang <jiang_hh2019@163.com>
To: Mark Brown <broonie@kernel.org>
Cc: Andy Shevchenko <andy@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Serge Semin <fancer.lancer@gmail.com>,
Brendan Higgins <brendan.higgins@linux.dev>,
David Gow <david@davidgow.net>, Rae Moar <raemoar63@gmail.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kselftest@vger.kernel.org, kunit-dev@googlegroups.com,
Honghui Jiang <jiang_hh2019@163.com>
Subject: [PATCH v2 2/4] spi: Move __spi_unmap_msg() before __spi_map_msg()
Date: Fri, 14 Aug 2026 11:14:16 +0800 [thread overview]
Message-ID: <20260814031419.43378-3-jiang_hh2019@163.com> (raw)
In-Reply-To: <20260814031419.43378-1-jiang_hh2019@163.com>
Move __spi_unmap_msg() above __spi_map_msg() so the mapping error path
can call it without a forward declaration. This is a code-only
relocation with no functional change.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Honghui Jiang <jiang_hh2019@163.com>
---
drivers/spi/spi.c | 48 +++++++++++++++++++++++------------------------
1 file changed, 23 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 12b3a3b29..96f5058c7 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1231,7 +1231,29 @@ void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
spi_unmap_buf_attrs(ctlr, dev, sgt, dir, 0);
}
-static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg);
+static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
+{
+ struct device *rx_dev = ctlr->cur_rx_dma_dev;
+ struct device *tx_dev = ctlr->cur_tx_dma_dev;
+ struct spi_transfer *xfer;
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ /* The sync has already been done after each transfer. */
+ unsigned long attrs = DMA_ATTR_SKIP_CPU_SYNC;
+
+ if (xfer->rx_sg_mapped)
+ spi_unmap_buf_attrs(ctlr, rx_dev, &xfer->rx_sg,
+ DMA_FROM_DEVICE, attrs);
+ xfer->rx_sg_mapped = false;
+
+ if (xfer->tx_sg_mapped)
+ spi_unmap_buf_attrs(ctlr, tx_dev, &xfer->tx_sg,
+ DMA_TO_DEVICE, attrs);
+ xfer->tx_sg_mapped = false;
+ }
+
+ return 0;
+}
static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
{
@@ -1300,30 +1322,6 @@ static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
return ret;
}
-static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
-{
- struct device *rx_dev = ctlr->cur_rx_dma_dev;
- struct device *tx_dev = ctlr->cur_tx_dma_dev;
- struct spi_transfer *xfer;
-
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- /* The sync has already been done after each transfer. */
- unsigned long attrs = DMA_ATTR_SKIP_CPU_SYNC;
-
- if (xfer->rx_sg_mapped)
- spi_unmap_buf_attrs(ctlr, rx_dev, &xfer->rx_sg,
- DMA_FROM_DEVICE, attrs);
- xfer->rx_sg_mapped = false;
-
- if (xfer->tx_sg_mapped)
- spi_unmap_buf_attrs(ctlr, tx_dev, &xfer->tx_sg,
- DMA_TO_DEVICE, attrs);
- xfer->tx_sg_mapped = false;
- }
-
- return 0;
-}
-
static void spi_dma_sync_for_device(struct spi_controller *ctlr,
struct spi_transfer *xfer)
{
--
2.43.0
next prev parent reply other threads:[~2026-08-14 3:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-14 3:14 [PATCH v2 0/4] spi: Fix DMA mapping ownership on partial map failure Honghui Jiang
2026-08-14 3:14 ` [PATCH v2 1/4] " Honghui Jiang
2026-08-14 3:14 ` Honghui Jiang [this message]
2026-08-14 3:14 ` [PATCH v2 3/4] spi: Clear current DMA devices when unmapping a message Honghui Jiang
2026-08-14 3:14 ` [PATCH v2 4/4] spi: Add KUnit coverage for DMA mapping error paths Honghui Jiang
2026-08-14 12:27 ` Andy Shevchenko
2026-08-14 12:49 ` Mark Brown
2026-08-14 17:38 ` Honghui Jiang
2026-08-14 17:41 ` Mark Brown
2026-08-15 2:32 ` David Gow
2026-08-14 12:28 ` [PATCH v2 0/4] spi: Fix DMA mapping ownership on partial map failure Andy Shevchenko
2026-08-14 15:49 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260814031419.43378-3-jiang_hh2019@163.com \
--to=jiang_hh2019@163.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=brendan.higgins@linux.dev \
--cc=broonie@kernel.org \
--cc=david@davidgow.net \
--cc=fancer.lancer@gmail.com \
--cc=kunit-dev@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=raemoar63@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®