[PATCH 0/5] Add SM7250 base dts file

[PATCH 0/5] Add SM7250 base dts file

[Sreeshankar K]

Qualcomm SM7250 is known as lito.

This patchset add base devicetree file for SM7250 SoC and
SM7250 MTP platform. This file adds the basic nodes like cpu,
psci and other required configuration for booting up to the
serial console.

Sreeshankar K (5):
  arm64: dts: qcom: Add SM7250 base dts file
  dt-bindings: arm: cpus: Document Kryo 475 CPUs
  dt-bindings: arm: qcom: Document SM7250 SoC and boards
  dt-bindings: firmware: qcom,scm: Document SM7250 SCM
  dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../bindings/firmware/qcom,scm.yaml           |   1 +
 .../interrupt-controller/qcom,pdc.yaml        |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sm7250-mtp.dts       |  30 ++
 arch/arm64/boot/dts/qcom/sm7250.dtsi          | 431 ++++++++++++++++++
 7 files changed, 471 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7250-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7250.dtsi

-- 
2.43.0

[PATCH 1/5] arm64: dts: qcom: Add SM7250 base dts file

[Sreeshankar K]

Add SM7250 devicetree file for SM7250 SoC and SM7250 MTP platform.
This file adds the basic nodes like cpu, psci and other required
configuration for booting up to the serial console.

Signed-off-by: Sreeshankar K <sreeshankar0910@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile       |   1 +
 arch/arm64/boot/dts/qcom/sm7250-mtp.dts |  30 ++
 arch/arm64/boot/dts/qcom/sm7250.dtsi    | 431 ++++++++++++++++++++++++
 3 files changed, 462 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7250-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7250.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f33c4e2f..4b68ed17f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -347,6 +347,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-curtana.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7250-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7325-motorola-dubai.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7325-nothing-spacewar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7250-mtp.dts b/arch/arm64/boot/dts/qcom/sm7250-mtp.dts
new file mode 100644
index 000000000..062b5958e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7250-mtp.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2026, Sreeshankar K <sreeshankar0910@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm7250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM7250 MTP";
+	compatible = "qcom,sm7250-mtp", "qcom,sm7250";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7250.dtsi b/arch/arm64/boot/dts/qcom/sm7250.dtsi
new file mode 100644
index 000000000..66b370546
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7250.dtsi
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2026, Sreeshankar K <sreeshankar0910@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,gcc-sm7250.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo475";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm7250", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	tcsr_mutex: hwlock@1f40000 {
+		compatible = "qcom,tcsr-mutex";
+		reg = <0x0 0x01f40000 0x0 0x40000>;
+		#hwlock-cells = <1>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0x0 0x80700000 0x0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		removed_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x1300000>;
+			no-map;
+		};
+
+		camera_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x500000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8bc15400 {
+			reg = <0x0 0x8bc15400 0x0 0x2000>;
+			no-map;
+		};
+
+		npu_mem: memory@86500000 {
+			reg = <0x0 0x86500000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@86a00000 {
+			reg = <0x0 0x86a00000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0x200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@8bc10000 {
+			reg = <0x0 0x8bc10000 0x0 0x5400>;
+			no-map;
+		};
+
+		cdsp_mem: memory@87400000 {
+			reg = <0x0 0x87400000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@89200000 {
+			reg = <0x0 0x89200000 0x0 0x2800000>;
+			no-map;
+		};
+
+		modem_mem: memory@8c000000 {
+			reg = <0x0 0x8c000000 0x0 0xf800000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@9f400000 {
+			reg = <0x0 0x9f400000 0x0 0xc00000>;
+			no-map;
+		};
+	};
+
+	smem: qcom,smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm7250";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+		};
+
+		qupv3_id_1: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart2: serial@988000 {
+			compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm7250-pdc", "qcom,pdc";
+			reg = <0 0xb220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 42>, <42 612 28>,
+					  <70 63 1>, <71 640 15>, <86 522 52>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi: qcom,spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm7250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c21000 0x0 0x1000>,
+				      <0x0 0x17c22000 0x0 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c23000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c25000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c27000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c29000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
-- 
2.43.0

[PATCH 2/5] dt-bindings: arm: cpus: Document Kryo 475 CPUs

[Sreeshankar K]

Document Kryo 475 CPUs found in Qualcomm SM7250 SoC.

Signed-off-by: Sreeshankar K <sreeshankar0910@gmail.com>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 5be89c584..2a90af67c 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -212,6 +212,7 @@ properties:
           - qcom,kryo465
           - qcom,kryo468
           - qcom,kryo470
+          - qcom,kryo475
           - qcom,kryo485
           - qcom,kryo560
           - qcom,kryo570
-- 
2.43.0

[PATCH 3/5] dt-bindings: arm: qcom: Document SM7250 SoC and boards

[Sreeshankar K]

Document the Qualcomm SM7250 SoC binding and the MTP board.

Signed-off-by: Sreeshankar K <sreeshankar0910@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 50cc18a6e..481041700 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1050,6 +1050,11 @@ properties:
               - fairphone,fp4
           - const: qcom,sm7225
 
+      - items:
+          - enum:
+              - qcom,sm7250-mtp
+          - const: qcom,sm7250
+
       - items:
           - enum:
               - motorola,dubai
@@ -1306,6 +1311,7 @@ allOf:
               - qcom,sm6350
               - qcom,sm7125
               - qcom,sm7225
+              - qcom,sm7250
               - qcom,sm8150
               - qcom,sm8250
     then:
-- 
2.43.0

[PATCH 4/5] dt-bindings: firmware: qcom,scm: Document SM7250 SCM

[Sreeshankar K]

Document the SCM compatible for Qualcomm SM7250 SoC.

Signed-off-by: Sreeshankar K <sreeshankar0910@gmail.com>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 25f62bacb..7446a54eb 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -72,6 +72,7 @@ properties:
           - qcom,scm-sm6350
           - qcom,scm-sm6375
           - qcom,scm-sm7150
+          - qcom,scm-sm7250
           - qcom,scm-sm8150
           - qcom,scm-sm8250
           - qcom,scm-sm8350
-- 
2.43.0

[PATCH 5/5] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC

[Sreeshankar K]

Document the PDC block on the SM7250 SoC.

Signed-off-by: Sreeshankar K <sreeshankar0910@gmail.com>
---
 .../devicetree/bindings/interrupt-controller/qcom,pdc.yaml       | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index 8162a49d4..c30b88589 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -50,6 +50,7 @@ properties:
           - qcom,sdx75-pdc
           - qcom,sm4450-pdc
           - qcom,sm6350-pdc
+          - qcom,sm7250-pdc
           - qcom,sm8150-pdc
           - qcom,sm8250-pdc
           - qcom,sm8350-pdc
-- 
2.43.0