mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rustam Adilov <adilov@disroot.org>
To: Thomas Gleixner <tglx@kernel.org>,
	Birger Koblitz <mail@birger-koblitz.de>,
	Bert Vermeulen <bert@biot.com>, John Crispin <john@phrozen.org>,
	linux-kernel@vger.kernel.org
Cc: Rustam Adilov <adilov@disroot.org>,
	Carlo Szelinsky <github@szelinsky.de>
Subject: [PATCH v3] irqchip/irq-realtek-rtl: change to readl_be and writel_be
Date: Thu, 20 Aug 2026 21:20:17 +0500	[thread overview]
Message-ID: <20260820162017.28507-1-adilov@disroot.org> (raw)

When CONFIG_SWAP_IO_SPACE is enabled, readl() is changed to perform
a swap from little endian device to big endian CPU and vice versa
for writel(). This is incorrect because the Realtek Interrupt
controller is a big endian device and so the LE to BE conversions
are unwanted.

Fix this by converting the MMIO accesses to readl_be() and writel_be().

Tested-by: Carlo Szelinsky <github@szelinsky.de>
Signed-off-by: Rustam Adilov <adilov@disroot.org>
---
Changes in v3:
 - Make the commit message more sensible, hopefully.
 - Change the __raw variants to readl_be and writel_be.
 - Add the note in the driver that the controller is big endian.

Changes in v2:
 - Make the commit message clearer.

 drivers/irqchip/irq-realtek-rtl.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index c8becb458da2..26e52c3f8c68 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -1,5 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
+ * Realtek Interrupt controller.
+ *
+ * The Realtek Interrupt controller is a big endian device found in the
+ * Realtek MIPS SoCs.
+ *
  * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
  * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
  * Copyright (C) 2020 John Crispin <john@phrozen.org>
@@ -50,18 +55,18 @@ static inline void enable_gimr(unsigned int cpu, unsigned int hw_irq)
 {
 	u32 gimr;
 
-	gimr = readl(REG(cpu, RTL_ICTL_GIMR));
+	gimr = readl_be(REG(cpu, RTL_ICTL_GIMR));
 	gimr |= BIT(hw_irq);
-	writel(gimr, REG(cpu, RTL_ICTL_GIMR));
+	writel_be(gimr, REG(cpu, RTL_ICTL_GIMR));
 }
 
 static inline void disable_gimr(unsigned int cpu, unsigned int hw_irq)
 {
 	u32 gimr;
 
-	gimr = readl(REG(cpu, RTL_ICTL_GIMR));
+	gimr = readl_be(REG(cpu, RTL_ICTL_GIMR));
 	gimr &= ~BIT(hw_irq);
-	writel(gimr, REG(cpu, RTL_ICTL_GIMR));
+	writel_be(gimr, REG(cpu, RTL_ICTL_GIMR));
 }
 
 static void write_irr(unsigned int cpu, int hw_irq, u32 value)
@@ -71,9 +76,9 @@ static void write_irr(unsigned int cpu, int hw_irq, u32 value)
 	unsigned int shift = IRR_SHIFT(hw_irq);
 	u32 irr;
 
-	irr = readl(irr0 + offset) & ~(0xf << shift);
+	irr = readl_be(irr0 + offset) & ~(0xf << shift);
 	irr |= (value & 0xf) << shift;
-	writel(irr, irr0 + offset);
+	writel_be(irr, irr0 + offset);
 }
 
 static void realtek_ictl_unmask_irq(struct irq_data *i)
@@ -159,7 +164,8 @@ static void realtek_irq_dispatch(struct irq_desc *desc)
 	unsigned int hw_irq;
 
 	chained_irq_enter(chip, desc);
-	pending = readl(REG(cpu, RTL_ICTL_GIMR)) & readl(REG(cpu, RTL_ICTL_GISR)) & output->mask;
+	pending = readl_be(REG(cpu, RTL_ICTL_GIMR)) &
+		  readl_be(REG(cpu, RTL_ICTL_GISR)) & output->mask;
 
 	if (unlikely(!pending)) {
 		spurious_interrupt();
-- 
2.55.0


             reply	other threads:[~2026-08-20 16:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-20 16:20 Rustam Adilov [this message]
2026-08-20 16:36 ` [tip: irq/urgent] irqchip/irq-realtek-rtl: Use readl_be()/writel_be() instead of readl()/writel() tip-bot2 for Rustam Adilov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260820162017.28507-1-adilov@disroot.org \
    --to=adilov@disroot.org \
    --cc=bert@biot.com \
    --cc=github@szelinsky.de \
    --cc=john@phrozen.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mail@birger-koblitz.de \
    --cc=tglx@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®