* [PATCH v2] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema
@ 2026-08-21 12:37 Udaya Kiran Challa
2026-08-31 14:14 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Udaya Kiran Challa @ 2026-08-21 12:37 UTC (permalink / raw)
To: lee, pavel, robh, krzk+dt, conor+dt
Cc: skhan, me, linux-leds, devicetree, linux-kernel, Udaya Kiran Challa
Convert lacie,netxbig-leds devicetree binding from legacy
text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
---
Changelog:
Changes since v1:
- Use pattenProperties for LED child nodes instead of additionalProperties
- Explicitly list the two optional properties supported by the binding
- Place the top-level required block after child-node definition
Link to v1:https://lore.kernel.org/all/20260820150223.108374-1-challauday369@gmail.com/
---
.../bindings/leds/lacie,netxbig-leds.yaml | 144 ++++++++++++++++++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 -----------
2 files changed, 144 insertions(+), 92 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
diff --git a/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
new file mode 100644
index 000000000000..02759ecb32d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/lacie,netxbig-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LaCie/Seagate netxbig CPLD LEDs
+
+maintainers:
+ - Simon Guinot <simon.guinot@sequanux.org>
+
+description: |
+ Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+ boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+properties:
+ compatible:
+ const: lacie,netxbig-leds
+
+ gpio-ext:
+ description: Phandle for the gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ timers:
+ description: |
+ Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+patternProperties:
+ "^(?!gpio-ext$|pinctrl-[0-9]+$)[a-z][a-z0-9]*(-[a-z0-9]+)+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ label:
+ description: |
+ Name for this LED. If omitted, the label is taken from the node name.
+ $ref: /schemas/types.yaml#/definitions/string
+
+ mode-addr:
+ description: Mode register address on gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mode-val:
+ description: |
+ Mode to value mapping. Each entry is represented by two integers:
+ a mode and the corresponding value on the gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ bright-addr:
+ description: Brightness register address on gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ max-brightness:
+ description: Maximum brightness value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ linux,default-trigger:
+ description: Trigger assigned to the LED.
+ $ref: /schemas/types.yaml#/definitions/string
+
+ required:
+ - mode-addr
+ - mode-val
+ - bright-addr
+ - max-brightness
+
+required:
+ - compatible
+ - gpio-ext
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/leds-netxbig.h>
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
deleted file mode 100644
index 5ef92a26d768..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-netxbig.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
-boards (Example: 2Big/5Big Network v2, 2Big NAS).
-
-Required properties:
-- compatible: "lacie,netxbig-leds".
-- gpio-ext: Phandle for the gpio-ext bus.
-
-Optional properties:
-- timers: Timer array. Each timer entry is represented by three integers:
- Mode (gpio-ext bus), delay_on and delay_off.
-
-Each LED is represented as a sub-node of the netxbig-leds device.
-
-Required sub-node properties:
-- mode-addr: Mode register address on gpio-ext bus.
-- mode-val: Mode to value mapping. Each entry is represented by two integers:
- A mode and the corresponding value on the gpio-ext bus.
-- bright-addr: Brightness register address on gpio-ext bus.
-- max-brightness: Maximum brightness value.
-
-Optional sub-node properties:
-- label: Name for this LED. If omitted, the label is taken from the node name.
-- linux,default-trigger: Trigger assigned to the LED.
-
-Example:
-
-netxbig-leds {
- compatible = "lacie,netxbig-leds";
-
- gpio-ext = &gpio_ext;
-
- timers = <NETXBIG_LED_TIMER1 500 500
- NETXBIG_LED_TIMER2 500 1000>;
-
- blue-power {
- label = "netxbig:blue:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 1
- NETXBIG_LED_TIMER1 3
- NETXBIG_LED_TIMER2 7>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- red-power {
- label = "netxbig:red:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- blue-sata0 {
- label = "netxbig:blue:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata0 {
- label = "netxbig:red:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- blue-sata1 {
- label = "netxbig:blue:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata1 {
- label = "netxbig:red:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
-};
--
2.34.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v2] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema
2026-08-21 12:37 [PATCH v2] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema Udaya Kiran Challa
@ 2026-08-31 14:14 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2026-08-31 14:14 UTC (permalink / raw)
To: Udaya Kiran Challa
Cc: lee, pavel, krzk+dt, conor+dt, skhan, me, linux-leds, devicetree,
linux-kernel
On Fri, Aug 21, 2026 at 06:07:23PM +0530, Udaya Kiran Challa wrote:
> Convert lacie,netxbig-leds devicetree binding from legacy
> text format to DT schema.
>
> Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
> ---
> Changelog:
>
> Changes since v1:
> - Use pattenProperties for LED child nodes instead of additionalProperties
> - Explicitly list the two optional properties supported by the binding
> - Place the top-level required block after child-node definition
>
> Link to v1:https://lore.kernel.org/all/20260820150223.108374-1-challauday369@gmail.com/
> ---
> .../bindings/leds/lacie,netxbig-leds.yaml | 144 ++++++++++++++++++
> .../devicetree/bindings/leds/leds-netxbig.txt | 92 -----------
> 2 files changed, 144 insertions(+), 92 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
> new file mode 100644
> index 000000000000..02759ecb32d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/lacie,netxbig-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LaCie/Seagate netxbig CPLD LEDs
> +
> +maintainers:
> + - Simon Guinot <simon.guinot@sequanux.org>
> +
> +description: |
> + Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
> + boards (Example: 2Big/5Big Network v2, 2Big NAS).
> +
> +properties:
> + compatible:
> + const: lacie,netxbig-leds
> +
> + gpio-ext:
> + description: Phandle for the gpio-ext bus.
> + $ref: /schemas/types.yaml#/definitions/phandle
> +
> + timers:
> + description: |
> + Timer array. Each timer entry is represented by three integers:
> + Mode (gpio-ext bus), delay_on and delay_off.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +patternProperties:
> + "^(?!gpio-ext$|pinctrl-[0-9]+$)[a-z][a-z0-9]*(-[a-z0-9]+)+$":
> + type: object
> + additionalProperties: false
You need a $ref to led common.yaml.
> +
> + properties:
> + label:
> + description: |
> + Name for this LED. If omitted, the label is taken from the node name.
> + $ref: /schemas/types.yaml#/definitions/string
And drop the type on all the common properties.
Rob
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-08-31 14:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-08-21 12:37 [PATCH v2] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema Udaya Kiran Challa
2026-08-31 14:14 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®