[PATCH v4 6/6] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6

[Fernando Rimoli <fernandorimoli11@gmail.com>]

The ov5693 (INT33BE / OVTI5693) needs its MIPI clock lane gated while
idle for the IPU6 CSI-2 receiver to lock onto the link; otherwise the
sensor streams but capture times out and no frames arrive. The sensor
driver gates the clock lane when the endpoint requests a non-continuous
clock, so the bridge has to supply that property.

The same sensor works with a free-running clock on the IPU3, so add
IPU_BR_FL_CSI2_CLK_NONCONTINUOUS and set it only for the ov5693 on the
IPU6 variants where the gate is known to be needed: IPU6 (Tiger Lake,
tested on a Surface Pro 7+) and IPU6EP_ADLP (Alder Lake-P, tested on a
Surface Pro 9). Other IPU6 product IDs are left out until someone can
confirm them on hardware; the generic entries continue to apply there
and on the IPU3.

Signed-off-by: Fernando Rimoli <fernandorimoli11@gmail.com>
---
 drivers/media/pci/intel/ipu-bridge.c | 13 +++++++++++++
 include/media/ipu-bridge.h           |  3 +++
 2 files changed, 16 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 38ad3e54e..7498531f2 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -16,6 +16,7 @@
 #include <linux/workqueue.h>
 
 #include <media/ipu-bridge.h>
+#include <media/ipu6-pci-table.h>
 #include <media/v4l2-fwnode.h>
 
 #define ADEV_DEV(adev) ACPI_PTR(&((adev)->dev))
@@ -62,6 +63,10 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("INT0310", 1, 55692000),
 	/* Omnivision OV5693 */
 	IPU_SENSOR_CONFIG("INT33BE", 1, 419200000),
+	IPU_SENSOR_CONFIG_MATCH_FL("INT33BE", PCI_DEVICE_ID_INTEL_IPU6,
+				   CSI2_CLK_NONCONTINUOUS, 1, 419200000),
+	IPU_SENSOR_CONFIG_MATCH_FL("INT33BE", PCI_DEVICE_ID_INTEL_IPU6EP_ADLP,
+				   CSI2_CLK_NONCONTINUOUS, 1, 419200000),
 	/* Onsemi MT9M114 */
 	IPU_SENSOR_CONFIG("INT33F0", 1, 384000000),
 	/* Omnivision OV2740 */
@@ -98,6 +103,10 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("OVTI5675", 1, 450000000),
 	/* Omnivision OV5693 */
 	IPU_SENSOR_CONFIG("OVTI5693", 1, 419200000),
+	IPU_SENSOR_CONFIG_MATCH_FL("OVTI5693", PCI_DEVICE_ID_INTEL_IPU6,
+				   CSI2_CLK_NONCONTINUOUS, 1, 419200000),
+	IPU_SENSOR_CONFIG_MATCH_FL("OVTI5693", PCI_DEVICE_ID_INTEL_IPU6EP_ADLP,
+				   CSI2_CLK_NONCONTINUOUS, 1, 419200000),
 	/* Omnivision OV8856 */
 	IPU_SENSOR_CONFIG("OVTI8856", 3, 180000000, 360000000, 720000000),
 	/* Sony IMX471 */
@@ -526,6 +535,10 @@ static void ipu_bridge_create_fwnode_properties(
 						     cfg->link_freqs,
 						     cfg->nr_link_freqs);
 
+	if (cfg->flags & IPU_BR_FL_CSI2_CLK_NONCONTINUOUS)
+		sensor->ep_properties[IPU_NEXT_EP_PROPERTY(i, NUM_OF)] =
+			PROPERTY_ENTRY_BOOL("clock-noncontinuous");
+
 	sensor->ipu_properties[0] = PROPERTY_ENTRY_U32_ARRAY_LEN(
 					sensor->prop_names.data_lanes,
 					bridge->data_lanes, sensor->lanes);
diff --git a/include/media/ipu-bridge.h b/include/media/ipu-bridge.h
index d12e51336..a5f8c5d4b 100644
--- a/include/media/ipu-bridge.h
+++ b/include/media/ipu-bridge.h
@@ -19,6 +19,8 @@
 
 /* Flags for struct ipu_sensor_config */
 #define IPU_BR_FL_NONE				0
+/* The sensor's CSI-2 transmitter needs a non-continuous clock */
+#define IPU_BR_FL_CSI2_CLK_NONCONTINUOUS	BIT(0)
 
 /*
  * Sensor config specific to a single IPU, identified by its PCI product ID,
@@ -83,6 +85,7 @@ enum ipu_sensor_ep_props {
 	IPU_SENSOR_EP_DATA_LANES,
 	IPU_SENSOR_EP_REMOTE_EP,
 	IPU_SENSOR_EP_LINK_FREQUENCIES,
+	IPU_SENSOR_EP_CLOCK_NONCONTINUOUS,
 	IPU_SENSOR_EP_NUM_OF,
 	IPU_SENSOR_EP_NUM_ENTRIES
 };
-- 
2.43.0