[PATCH 0/5] arm64: dts: qcom: use pci for device nodes

[Alex Elder <elder@riscstar.com>]

A recent change caused the embedded PCIe endpoints on TC9564 SoCs to
be treated by the devicetree code as PCI buses, which is incorrect.

The TC9564 includes a PCIe switch with one upstream port and two
downstream (external) ports, plus a third downstream port.  The
third port has an embedded PCIe endpoint with two functions, each
providing access to a 10 Gbps capable Ethernet interface.

The devicetree nodes representing these functions were previously
named "pci@" but were renamed in the interest of consistency in
commit e806c63ba51a7 ("arm64: dts: qcom: Rename pci@ nodes to pcie@").

This unfortunately changed the way the devicetree code treats the
nodes, because of_bus_pci_match() considers any node named pcie@
that has no device_type property to be a PCI bus.

The previous name "pci" matched such nodes as "default-flags" bus type
(defined in the of_busses[] array).  This series restores the previous
behavior for these endpoint nodes.

					-Alex

Alex Elder (5):
  arm64: dts: qcom: qcs6490-rb3gen2: use pci for device nodes
  arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: use pci for
    device nodes
  arm64: dts: qcom: lemans-evk-ifp-mezzanine: use pci for device nodes
  arm64: dts: qcom: monaco-evk-ifp-mezzanine: use dev for device nodes
  arm64: dts: qcom: qcs6490-thundercomm-minipc-g1iot: use dev for device
    nodes

 arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso    | 4 ++--
 arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso    | 4 ++--
 .../dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso    | 8 ++++----
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts              | 4 ++--
 .../boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts    | 4 ++--
 5 files changed, 12 insertions(+), 12 deletions(-)


base-commit: cee9395acd8043be0644b25c34bfa86623f2b935
-- 
2.53.0