[PATCH 4/5] arm64: dts: qcom: monaco-evk-ifp-mezzanine: use dev for device nodes

[Alex Elder <elder@riscstar.com>]

A recent change caused the embedded PCIe endpoints on TC9564 SoCs to
be treated by the devicetree code as PCI buses, which is incorrect.

The Monaco EVK IFP mezzanine has a TC9564 SoC, which includes a
PCIe switch with one upstream port and two downstream (external)
ports, plus a third downstream port.  The third port has an embedded
PCIe endpoint with two functions, each providing access to a 10 Gbps
capable Ethernet interface.

The devicetree nodes representing these functions were previously
named "pci@" but were renamed in the interest of consistency in
commit e806c63ba51a7 ("arm64: dts: qcom: Rename pci@ nodes to pcie@").

Unfortunately, of_node_is_pcie() causes nodes named "pcie@" to be
treated as PCI bridges, which PCI endpoints are not.  The previous
name "pci" matched such nodes as "default-flags" bus type, defined
in the of_busses[] array.

Rename the PCIe endpoint nodes "pci@" so they are not mistaken for
bridge nodes by the devicetree parsing code.  This restores the
previous behavior, and allows them to be used for PCI endpoint bus.

Fixes: e806c63ba51a7 ("arm64: dts: qcom: Rename pci@ nodes to pcie@")
Signed-off-by: Alex Elder <elder@riscstar.com>
---
 arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso
index ca5bf0fe5ec6e..a6e57ec8a1e14 100644
--- a/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso
@@ -117,7 +117,7 @@ pcie@3,0 {
 			ranges;
 			bus-range = <0x5 0xff>;
 
-			pcie@0,0 {
+			pci@0,0 {
 				reg = <0x50000 0x0 0x0 0x0 0x0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -125,7 +125,7 @@ pcie@0,0 {
 				ranges;
 			};
 
-			pcie@0,1 {
+			pci@0,1 {
 				reg = <0x50100 0x0 0x0 0x0 0x0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
-- 
2.53.0