* [PATCH v2] arm64: dts: qcom: x1-denali: Add volume up/down GPIO keys
@ 2026-09-02 12:52 Dale Whinham
2026-09-02 13:26 ` Abel Vesa
0 siblings, 1 reply; 2+ messages in thread
From: Dale Whinham @ 2026-09-02 12:52 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel,
Jérôme de Bretagne, Konrad Dybcio, Dale Whinham
Configure gpio6 and gpio8 as volume up and volume down respectively, to
enable the volume rocker located at the top of the screen.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dale Whinham <daleyo@gmail.com>
---
Changes in v2:
- Sort the new pin configuration nodes by controller and GPIO number (Konrad)
- Link to v1: https://patch.msgid.link/20260829-surface-pro-11-volume-buttons-v1-1-ace589343a68@gmail.com
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi | 36 ++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi b/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi
index 7559557610ed..6ed7db0ad53f 100644
--- a/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi
@@ -20,9 +20,27 @@ aliases {
gpio-keys {
compatible = "gpio-keys";
- pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-0 = <&vol_up_n>, <&vol_down_n>, <&hall_int_n_default>;
pinctrl-names = "default";
+ key-vol-up {
+ debounce-interval = <15>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ label = "Volume Up";
+ linux,can-disable;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ };
+
+ key-vol-down {
+ debounce-interval = <15>;
+ gpios = <&pm8550_gpios 8 GPIO_ACTIVE_LOW>;
+ label = "Volume Down";
+ linux,can-disable;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ };
+
switch-lid {
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -984,6 +1002,22 @@ &pcie6a_port0 {
};
&pm8550_gpios {
+ vol_up_n: vol-up-n-state {
+ bias-pull-up;
+ input-enable;
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ };
+
+ vol_down_n: vol-down-n-state {
+ bias-pull-up;
+ input-enable;
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ };
+
rtmr0_default: rtmr0-reset-n-active-state {
pins = "gpio10";
function = "normal";
---
base-commit: 8d3ae59288f1e7d58d76558a6ee96d533bc5019f
change-id: 20260829-surface-pro-11-volume-buttons-f4b40e25cecb
Best regards,
--
Dale Whinham <daleyo@gmail.com>
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH v2] arm64: dts: qcom: x1-denali: Add volume up/down GPIO keys
2026-09-02 12:52 [PATCH v2] arm64: dts: qcom: x1-denali: Add volume up/down GPIO keys Dale Whinham
@ 2026-09-02 13:26 ` Abel Vesa
0 siblings, 0 replies; 2+ messages in thread
From: Abel Vesa @ 2026-09-02 13:26 UTC (permalink / raw)
To: Dale Whinham
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Jérôme de Bretagne, Konrad Dybcio
On 26-09-02 13:52:36, Dale Whinham wrote:
> Configure gpio6 and gpio8 as volume up and volume down respectively, to
> enable the volume rocker located at the top of the screen.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dale Whinham <daleyo@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-09-02 13:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-02 12:52 [PATCH v2] arm64: dts: qcom: x1-denali: Add volume up/down GPIO keys Dale Whinham
2026-09-02 13:26 ` Abel Vesa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®