From: Hemanth Selam <hemanth.selam@gmail.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Andrew Lunn <andrew@lunn.ch>,
Sudarsana Kalluru <skalluru@marvell.com>,
Manish Chopra <manishc@marvell.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
Simon Horman <horms@kernel.org>,
Edward Cree <ecree.xilinx@gmail.com>,
Shuah Khan <shuah@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-net-drivers@amd.com, linux-kselftest@vger.kernel.org,
linux-usb@vger.kernel.org
Subject: [PATCH v2 1/6] net: fix typos in comments
Date: Mon, 7 Sep 2026 10:16:30 +0530 [thread overview]
Message-ID: <20260907044635.7141-2-hemanth.selam@gmail.com> (raw)
In-Reply-To: <20260907044635.7141-1-hemanth.selam@gmail.com>
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/net/dsa/bcm_sf2_cfp.c | 2 +-
drivers/net/dsa/microchip/ksz_dcb.c | 2 +-
drivers/net/dsa/realtek/rtl8366rb.c | 2 +-
drivers/net/dsa/sja1105/sja1105_tas.c | 2 +-
drivers/net/ethernet/3com/typhoon.h | 2 +-
drivers/net/ethernet/8390/ax88796.c | 2 +-
drivers/net/ethernet/airoha/airoha_eth.c | 2 +-
drivers/net/ethernet/allwinner/sun4i-emac.c | 2 +-
drivers/net/ethernet/amazon/ena/ena_eth_com.h | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 2 +-
drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 2 +-
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 2 +-
drivers/net/ethernet/atheros/atl1e/atl1e.h | 2 +-
drivers/net/ethernet/atheros/atl1e/atl1e_hw.c | 2 +-
drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 2 +-
drivers/net/ethernet/atheros/atlx/atl1.c | 2 +-
drivers/net/ethernet/atheros/atlx/atl2.c | 2 +-
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +-
drivers/net/ethernet/broadcom/bcm63xx_enet.h | 2 +-
drivers/net/ethernet/broadcom/bcmsysport.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 4 ++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 8 ++++----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 4 ++--
drivers/net/ethernet/brocade/bna/bfa_ioc.c | 4 ++--
drivers/net/ethernet/brocade/bna/bna_enet.c | 4 ++--
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/cavium/liquidio/cn66xx_device.c | 2 +-
drivers/net/ethernet/cavium/liquidio/lio_core.c | 2 +-
drivers/net/ethernet/cavium/liquidio/octeon_config.h | 4 ++--
drivers/net/ethernet/cavium/liquidio/octeon_iq.h | 2 +-
drivers/net/ethernet/cavium/liquidio/octeon_main.h | 2 +-
drivers/net/ethernet/cavium/liquidio/octeon_nic.h | 2 +-
drivers/net/ethernet/cavium/liquidio/request_manager.c | 2 +-
drivers/net/ethernet/cavium/thunder/nic.h | 2 +-
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
drivers/net/ethernet/chelsio/cxgb3/sge.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 2 +-
drivers/net/ethernet/cirrus/cs89x0.c | 4 ++--
drivers/net/ethernet/dec/tulip/de2104x.c | 2 +-
drivers/net/ethernet/dec/tulip/interrupt.c | 4 ++--
drivers/net/ethernet/dec/tulip/media.c | 2 +-
drivers/net/ethernet/dec/tulip/tulip.h | 4 ++--
drivers/net/ethernet/dec/tulip/winbond-840.c | 2 +-
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +-
drivers/net/ethernet/freescale/fman/fman_memac.c | 2 +-
drivers/net/ethernet/freescale/gianfar.c | 2 +-
drivers/net/ethernet/freescale/gianfar.h | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 4 ++--
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +-
.../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +-
drivers/net/ethernet/ibm/emac/emac.h | 2 +-
drivers/net/ethernet/ibm/emac/phy.h | 2 +-
drivers/net/ethernet/jme.h | 2 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 8 ++++----
drivers/net/ethernet/marvell/octeontx2/af/npc.h | 4 ++--
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 2 +-
drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c | 2 +-
.../net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c | 2 +-
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 +-
drivers/net/ethernet/marvell/pxa168_eth.c | 4 ++--
drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/i2c.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
drivers/net/ethernet/natsemi/sonic.h | 2 +-
drivers/net/ethernet/nvidia/forcedeth.c | 4 ++--
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_mcp.h | 2 +-
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 +-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 4 ++--
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 2 +-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 ++--
drivers/net/ethernet/qualcomm/emac/emac-mac.c | 2 +-
drivers/net/ethernet/realtek/8139too.c | 2 +-
drivers/net/ethernet/realtek/rtase/rtase_main.c | 2 +-
drivers/net/ethernet/seeq/sgiseeq.c | 2 +-
drivers/net/ethernet/sfc/falcon/falcon.c | 2 +-
drivers/net/ethernet/sfc/mcdi_pcol.h | 8 ++++----
drivers/net/ethernet/sfc/siena/mcdi_pcol.h | 6 +++---
drivers/net/ethernet/sfc/siena/ptp.c | 2 +-
drivers/net/ethernet/sgi/meth.h | 2 +-
drivers/net/ethernet/silan/sc92031.c | 6 +++---
drivers/net/ethernet/sis/sis900.c | 2 +-
drivers/net/ethernet/smsc/smsc9420.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 2 +-
drivers/net/ethernet/sun/cassini.h | 2 +-
drivers/net/ethernet/synopsys/dwc-xlgmac-common.c | 2 +-
drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c | 2 +-
drivers/net/ethernet/tehuti/tehuti.c | 8 ++++----
drivers/net/ethernet/ti/tlan.c | 2 +-
drivers/net/ethernet/toshiba/ps3_gelic_net.c | 2 +-
drivers/net/ethernet/toshiba/ps3_gelic_net.h | 2 +-
drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +-
drivers/net/ethernet/via/via-rhine.c | 2 +-
drivers/net/ethernet/via/via-velocity.c | 10 +++++-----
drivers/net/fddi/skfp/cfm.c | 2 +-
drivers/net/fddi/skfp/ecm.c | 2 +-
drivers/net/fddi/skfp/fplustm.c | 4 ++--
drivers/net/fddi/skfp/h/hwmtm.h | 2 +-
drivers/net/fddi/skfp/h/sba.h | 2 +-
drivers/net/fddi/skfp/pcmplc.c | 2 +-
drivers/net/fddi/skfp/rmt.c | 2 +-
drivers/net/ipa/ipa_interrupt.h | 2 +-
drivers/net/phy/bcm87xx.c | 2 +-
drivers/net/phy/marvell.c | 2 +-
drivers/net/ppp/ppp_generic.c | 4 ++--
drivers/net/usb/ax88179_178a.c | 4 ++--
drivers/net/wan/slic_ds26522.c | 2 +-
drivers/s390/net/ctcm_main.c | 4 ++--
drivers/s390/net/qeth_core.h | 2 +-
include/net/inet_hashtables.h | 2 +-
include/net/sock.h | 2 +-
net/ipv4/tcp.c | 2 +-
net/ipv4/tcp_input.c | 2 +-
net/ipv4/tcp_output.c | 2 +-
net/ipv6/calipso.c | 4 ++--
net/llc/llc_c_ac.c | 2 +-
net/netlink/af_netlink.c | 2 +-
net/sctp/protocol.c | 4 ++--
net/sctp/sm_make_chunk.c | 4 ++--
net/sctp/sm_sideeffect.c | 2 +-
net/sctp/transport.c | 2 +-
net/sctp/ulpqueue.c | 2 +-
samples/pktgen/README.rst | 2 +-
tools/testing/selftests/drivers/net/team/options.sh | 2 +-
.../selftests/net/arp_ndisc_untracked_subnets.sh | 4 ++--
tools/testing/selftests/net/forwarding/lib.sh | 2 +-
tools/testing/selftests/net/ip_defrag.c | 2 +-
142 files changed, 184 insertions(+), 184 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 50d3a818eb1b..62258f9cd3f5 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -898,7 +898,7 @@ static int bcm_sf2_cfp_rule_insert(struct dsa_switch *ds, int port,
/*
* We have a small oddity where Port 6 just does not have a
- * valid bit here (so we substract by one).
+ * valid bit here (so we subtract by one).
*/
queue_num = ring_cookie % SF2_NUM_EGRESS_QUEUES;
if (port_num >= 7)
diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c
index 7131c5caac54..a0d345382ce7 100644
--- a/drivers/net/dsa/microchip/ksz_dcb.c
+++ b/drivers/net/dsa/microchip/ksz_dcb.c
@@ -227,7 +227,7 @@ int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio)
* @port: Port number for which to get the priority
* @dscp: DSCP value for which to get the priority
*
- * This function fetches the priority value from switch global DSCP-to-priorty
+ * This function fetches the priority value from switch global DSCP-to-priority
* mapping table for the specified DSCP value.
*
* Return: The priority value for the DSCP on success, or a negative error
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index f11831b66de8..4aef48410f9d 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -363,7 +363,7 @@ static int rtl8366rb_get_mib_counter(struct realtek_priv *priv,
mib->offset;
/* Writing access counter address first
- * then ASIC will prepare 64bits counter wait for being retrived
+ * then ASIC will prepare 64bits counter wait for being retrieved
*/
ret = regmap_write(priv->map, addr, 0); /* Write whatever */
if (ret)
diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c
index e47967b12d5d..391b30b09290 100644
--- a/drivers/net/dsa/sja1105/sja1105_tas.c
+++ b/drivers/net/dsa/sja1105/sja1105_tas.c
@@ -377,7 +377,7 @@ int sja1105_init_scheduling(struct sja1105_private *priv)
* - Collisions in the future. Events may not collide within one cycle time,
* but if two port schedules don't have the same periodicity (aka the cycle
* times aren't multiples of one another), they surely will some time in the
- * future (actually they will collide an infinite amount of times).
+ * future (actually they will collide an infinite number of times).
*/
static bool
sja1105_tas_check_conflicts(struct sja1105_private *priv, int port,
diff --git a/drivers/net/ethernet/3com/typhoon.h b/drivers/net/ethernet/3com/typhoon.h
index 38e6dcab4e94..6e3b44a0e2f9 100644
--- a/drivers/net/ethernet/3com/typhoon.h
+++ b/drivers/net/ethernet/3com/typhoon.h
@@ -19,7 +19,7 @@
number Y1-LM-2015-01.
*/
-/* All Typhoon ring positions are specificed in bytes, and point to the
+/* All Typhoon ring positions are specified in bytes, and point to the
* first "clean" entry in the ring -- ie the next entry we use for whatever
* purpose.
*/
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index e1695d0fbd8b..b1d63f404c7b 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -675,7 +675,7 @@ static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
*
* initialise the specified device, taking care to note the MAC
* address it may already have (if configured), ensure
- * the device is ready to be used by lib8390.c and registerd with
+ * the device is ready to be used by lib8390.c and registered with
* the network layer.
*/
static int ax_init_dev(struct net_device *dev)
diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index 64619e9a704d..5bb59d04d869 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -900,7 +900,7 @@ static int airoha_qdma_init_rx(struct airoha_qdma *qdma)
int err;
if (!(RX_DONE_INT_MASK & BIT(i))) {
- /* rx-queue not binded to irq */
+ /* rx-queue not bound to irq */
continue;
}
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 942454e29488..8f44b7d8c0b3 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -504,7 +504,7 @@ static void emac_init_device(struct net_device *dev)
writel(reg_val | EMAC_CTL_RESET | EMAC_CTL_TX_EN | EMAC_CTL_RX_EN,
db->membase + EMAC_CTL_REG);
- /* enable RX/TX0/RX Hlevel interrup */
+ /* enable RX/TX0/RX Hlevel interrupt */
reg_val = readl(db->membase + EMAC_INT_CTL_REG);
reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
writel(reg_val, db->membase + EMAC_INT_CTL_REG);
diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.h b/drivers/net/ethernet/amazon/ena/ena_eth_com.h
index 449bc4960ccc..db192451afff 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.h
@@ -93,7 +93,7 @@ static inline bool ena_com_sq_have_enough_space(struct ena_com_io_sq *io_sq,
/* This calculation doesn't need to be 100% accurate. So to reduce
* the calculation overhead just Subtract 2 lines from the free descs
- * (one for the header line and one to compensate the devision
+ * (one for the header line and one to compensate the division
* down calculation.
*/
temp = required_buffers / io_sq->llq_info.descs_per_entry + 2;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
index e2e850c1b90b..ccab0d9f6f21 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -1482,7 +1482,7 @@ static void xgbe_tx_desc_init(struct xgbe_channel *channel)
DBGPR("-->tx_desc_init\n");
- /* Initialze all descriptors */
+ /* Initialize all descriptors */
for (i = 0; i < ring->rdesc_count; i++) {
rdata = XGBE_GET_DESC_DATA(ring, i);
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index 507db46daf2b..ec3329045561 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -1770,7 +1770,7 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
if (IS_ERR(pdata->clk)) {
if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
/* Abort if the clock is defined but couldn't be
- * retrived. Always abort if the clock is missing on
+ * retrieved. Always abort if the clock is missing on
* DT system as the driver can't cope with this case.
*/
if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index c567c920628f..8f03bb561d44 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -659,7 +659,7 @@ void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed);
/* INT-triggle/SMB Control Register */
#define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */
#define SMB_STAT_TIMER_MASK 0xFFFFFF
-#define REG_TINT_TPD_THRESH 0x15C8 /* tpd th to trig intrrupt */
+#define REG_TINT_TPD_THRESH 0x15C8 /* tpd th to trig interrupt */
/* Mail box */
#define MB_RFDX_PROD_IDX_MASK 0xFFFF
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
index 9fcad783c939..6b0066f47e9e 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e.h
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h
@@ -381,7 +381,7 @@ struct atl1e_rx_page {
u8 *addr; /* receive rage virtual address */
dma_addr_t write_offset_dma; /* the DMA address which contain the
receive data offset in the page */
- u32 *write_offset_addr; /* the virtaul address which contain
+ u32 *write_offset_addr; /* the virtual address which contain
the receive data offset in the page */
u32 read_offset; /* the offset where we have read */
};
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
index fa89bc27f62d..25d3e7469058 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
@@ -369,7 +369,7 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*
- * Sets bit 15 and 12 of the MII control regiser (for F001 bug)
+ * Sets bit 15 and 12 of the MII control register (for F001 bug)
*/
int atl1e_phy_commit(struct atl1e_hw *hw)
{
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 40290028580b..cc6c262868a5 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -2117,7 +2117,7 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
if (wufc & AT_WUFC_LNKC) {
- /* if orignal link status is link, just wait for retrive link */
+ /* if original link status is link, just wait for retrieve link */
if (mii_bmsr_data & BMSR_LSTATUS) {
for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
msleep(100);
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index 98a4d089270e..179d74e93efd 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -628,7 +628,7 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
* Resets the PHY and make all config validate
* hw - Struct containing variables accessed by shared code
*
- * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
+ * Sets bit 15 and 12 of the MII Control register (for F001 bug)
*/
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 5560d5cc3169..c9aca219ec9c 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -2591,7 +2591,7 @@ static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*
- * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
+ * Sets bit 15 and 12 of the MII Control register (for F001 bug)
*/
static s32 atl2_phy_commit(struct atl2_hw *hw)
{
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 7ef1babfeca6..f6595fdc888d 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1564,7 +1564,7 @@ static int bcm_enet_set_pauseparam(struct net_device *dev,
if (priv->has_phy) {
if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) {
- /* asymetric pause mode not supported,
+ /* asymmetric pause mode not supported,
* actually possible but integrated PHY has RO
* asym_pause bit */
return -EINVAL;
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
index 78f1830fb3cb..ba8f42cf5fb2 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
@@ -265,7 +265,7 @@ struct bcm_enet_priv {
/* number of available descriptor for tx */
int tx_desc_count;
- /* next tx descriptor avaiable */
+ /* next tx descriptor available */
int tx_curr_desc;
/* next dirty tx descriptor to reclaim */
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index a34296f989f1..6f807e96dbd8 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -402,7 +402,7 @@ struct bcm_rsb {
#define TDMA_DESC_RING_BASE(i) (TDMA_DESC_RING_00_BASE + \
((i) * TDMA_DESC_RING_SIZE))
-/* Ring indexed register addreses */
+/* Ring indexed register addresses */
#define TDMA_DESC_RING_HEAD_TAIL_PTR(i) (TDMA_DESC_RING_BASE(i) + \
RING_HEAD_TAIL_PTR)
#define TDMA_DESC_RING_COUNT(i) (TDMA_DESC_RING_BASE(i) + \
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 9580ab83d387..a2050083048b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -666,7 +666,7 @@ struct bnx2x_fastpath {
MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT)
/* max BDs per tx packet w/o next_pages:
* START_BD - describes packed
- * START_BD(splitted) - includes unpaged data segment for GSO
+ * START_BD(split) - includes unpaged data segment for GSO
* PARSING_BD - for TSO and CSUM data
* PARSING_BD2 - for encapsulation data
* Frag BDs - describes pages for frags
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 9af81630c8a4..3df8a5988521 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -1986,7 +1986,7 @@ static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio,
return;
/**
- * bw_pct ignored - band-width percentage devision between user
+ * bw_pct ignored - band-width percentage division between user
* priorities within the same group is not
* standard and hence not supported
*
@@ -2038,7 +2038,7 @@ static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio,
DP(BNX2X_MSG_DCB, "prio = %d\n", prio);
/**
- * bw_pct ignored - band-width percentage devision between user
+ * bw_pct ignored - band-width percentage division between user
* priorities within the same group is not
* standard and hence not supported
*
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 611efee75834..5297ab578a6f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2342,7 +2342,7 @@ struct shmem2_region {
u32 oem_i2c_data_addr;
};
- /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
+ /* 9 entries for the C2S PCP map for each inner VLAN PCP + 1 default */
/* For PCP values 0-3 use the map lower */
/* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
* 0x0000FF00 - PCP 2, 0x000000FF PCP 3
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index fc7fce642666..b5004aab124d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
@@ -582,7 +582,7 @@ static void bnx2x_init_pxp_arb(struct bnx2x *bp, int r_order,
REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
}
- /* Validate number of tags suppoted by device */
+ /* Validate number of tags supported by device */
#define PCIE_REG_PCIER_TL_HDR_FC_ST 0x2980
val = REG_RD(bp, PCIE_REG_PCIER_TL_HDR_FC_ST);
val &= 0xFF;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index ea310057fe3a..84d002b31920 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -2536,7 +2536,7 @@ static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
}
/**
- * bnx2x_get_emac_base - retrive emac base address
+ * bnx2x_get_emac_base - retrieve emac base address
*
* @bp: driver handle
* @mdc_mdio_access: access type
@@ -3593,7 +3593,7 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
u8 ret = 0;
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) {
- /* Update the advertised flow-controled of LD/LP in AN */
+ /* Update the advertised flow-controlled of LD/LP in AN */
if (phy->req_line_speed == SPEED_AUTO_NEG)
bnx2x_ext_phy_update_adv_fc(phy, params, vars);
/* But set the flow-control result as the requested one */
@@ -3743,7 +3743,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n");
- /* Set to default registers that may be overriden by 10G force */
+ /* Set to default registers that may be overridden by 10G force */
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
@@ -5425,7 +5425,7 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy,
/* Resolve from gp_status in case of AN complete and not sgmii */
if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) {
- /* Update the advertised flow-controled of LD/LP in AN */
+ /* Update the advertised flow-controlled of LD/LP in AN */
if (phy->req_line_speed == SPEED_AUTO_NEG)
bnx2x_update_adv_fc(phy, params, vars, gp_status);
/* But set the flow-control result as the requested one */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 39eb6ab5f805..277c7bd9c6e7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12669,7 +12669,7 @@ static int bnx2x_set_mc_list(struct bnx2x *bp)
if (rc)
return rc;
- /* Override the curently configured set of mc filters */
+ /* Override the currently configured set of mc filters */
rc = bnx2x_config_mcast(bp, &rparam,
BNX2X_MCAST_CMD_SET);
if (rc < 0)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index a018f251d198..30943f347164 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -2236,7 +2236,7 @@ extern const u32 dmae_reg_go_c[];
/* [RW 1] Output enable for TX PAUSE signal to the MAC. */
#define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4
/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
- * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
+ * future expansion) each priority is to be mapped to. Bits 3:0 specify the
* COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
* priority field is extracted from the outer-most VLAN in receive packet.
* Only COS 0 and COS 1 are supported in E2. */
@@ -2434,7 +2434,7 @@ extern const u32 dmae_reg_go_c[];
/* [RW 1] Output enable for TX PAUSE signal to the MAC. */
#define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8
/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
- * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
+ * future expansion) each priority is to be mapped to. Bits 3:0 specify the
* COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
* priority field is extracted from the outer-most VLAN in receive packet.
* Only COS 0 and COS 1 are supported in E2. */
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 92c7639d1fc7..07ca97b56b3e 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1605,7 +1605,7 @@ bfa_flash_read_start(void __iomem *pci_bar, u32 offset, u32 len,
{
int status;
- /* len must be mutiple of 4 and not exceeding fifo size */
+ /* len must be multiple of 4 and not exceeding fifo size */
if (len == 0 || len > BFA_FLASH_FIFO_SIZE || (len & 0x03) != 0)
return BFA_FLASH_ERR_LEN;
@@ -3023,7 +3023,7 @@ bfa_ioc_poll_fwinit(struct bfa_ioc *ioc)
/*
* FLASH DMA buffer should be big enough to hold both MFG block and
* asic block(64k) at the same time and also should be 2k aligned to
- * avoid write segement to cross sector boundary.
+ * avoid write segment to cross sector boundary.
*/
#define BFA_FLASH_SEG_SZ 2048
#define BFA_FLASH_DMA_BUF_SZ \
diff --git a/drivers/net/ethernet/brocade/bna/bna_enet.c b/drivers/net/ethernet/brocade/bna/bna_enet.c
index 883de0ac8de4..6c787c93c8f6 100644
--- a/drivers/net/ethernet/brocade/bna/bna_enet.c
+++ b/drivers/net/ethernet/brocade/bna/bna_enet.c
@@ -1877,13 +1877,13 @@ bna_res_req(struct bna_res_info *res_info)
res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.len =
ALIGN(bfa_nw_ioc_meminfo(), PAGE_SIZE);
- /* Virtual memory for retreiving fw_trc */
+ /* Virtual memory for retrieving fw_trc */
res_info[BNA_RES_MEM_T_FWTRC].res_type = BNA_RES_T_MEM;
res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mem_type = BNA_MEM_T_KVA;
res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.num = 1;
res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.len = BNA_DBG_FWTRC_LEN;
- /* DMA memory for retreiving stats */
+ /* DMA memory for retrieving stats */
res_info[BNA_RES_MEM_T_STATS].res_type = BNA_RES_T_MEM;
res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.num = 1;
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index a2410fba6be2..4792d5c290ae 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1117,7 +1117,7 @@ static netdev_tx_t xgmac_xmit(struct sk_buff *skb, struct net_device *dev)
desc_set_tx_owner(desc, desc_flags);
}
- /* Interrupt on completition only for the latest segment */
+ /* Interrupt on completion only for the latest segment */
if (desc != first)
desc_set_tx_owner(desc, desc_flags |
TXDESC_LAST_SEG | irq_flag);
diff --git a/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c b/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c
index 93fccfec288d..d3ebbb40579e 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c
@@ -177,7 +177,7 @@ static void lio_cn66xx_setup_pkt_ctl_regs(struct octeon_device *oct)
/* 66XX SPECIFIC */
if (CFG_GET_OQ_MAX_Q(cn6xxx->conf) <= 4)
- /* Disable RING_EN if only upto 4 rings are used. */
+ /* Disable RING_EN if only up to 4 rings are used. */
pktctl &= ~(1 << 4);
else
pktctl |= (1 << 4);
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_core.c b/drivers/net/ethernet/cavium/liquidio/lio_core.c
index 93b06d599eed..bed450bfad38 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_core.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_core.c
@@ -565,7 +565,7 @@ static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs,
}
/**
- * liquidio_push_packet - Routine to push packets arriving on Octeon interface upto network layer.
+ * liquidio_push_packet - Routine to push packets arriving on Octeon interface up to network layer.
* @octeon_id:octeon device id.
* @skbuff: skbuff struct to be passed to network layer.
* @len: size of total data received.
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_config.h b/drivers/net/ethernet/cavium/liquidio/octeon_config.h
index 24c212001212..d2d64edaf3bf 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_config.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_config.h
@@ -254,7 +254,7 @@ struct octeon_oq_config {
u64 pkts_per_intr:16;
/** Interrupt Coalescing (Time Interval). Octeon will interrupt the
- * host if atleast one packet was sent in the time interval specified
+ * host if at least one packet was sent in the time interval specified
* by this field. The driver uses time interval interrupt coalescing
* by default. The time is specified in microseconds.
*/
@@ -296,7 +296,7 @@ struct octeon_oq_config {
u64 oq_intr_pkt:16;
/** Interrupt Coalescing (Time Interval). Octeon will interrupt the
- * host if atleast one packet was sent in the time interval specified
+ * host if at least one packet was sent in the time interval specified
* by this field. The driver uses time interval interrupt coalescing
* by default. The time is specified in microseconds.
*/
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_iq.h b/drivers/net/ethernet/cavium/liquidio/octeon_iq.h
index a04f36a0e1a0..fdd7d3a77a2d 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_iq.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_iq.h
@@ -70,7 +70,7 @@ struct oct_iq_stats {
/** The instruction (input) queue.
* The input queue is used to post raw (instruction) mode data or packet
- * data to Octeon device from the host. Each input queue (upto 4) for
+ * data to Octeon device from the host. Each input queue (up to 4) for
* a Octeon device has one such structure to represent it.
*/
struct octeon_instr_queue {
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_main.h b/drivers/net/ethernet/cavium/liquidio/octeon_main.h
index 953edf0c7096..d2a52673cac5 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_main.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_main.h
@@ -166,7 +166,7 @@ static inline int octeon_map_pci_barx(struct octeon_device *oct,
* errno -EINTR: user abort the command.
* errno -ETIME: user spefified timeout value has been expired.
* errno -EBUSY: the response of the request does not return in
- * resonable time (LIO_SC_MAX_TMO_MS).
+ * reasonable time (LIO_SC_MAX_TMO_MS).
* the sc wll be move to zombie response list by
* lio_process_ordered_list()
*
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_nic.h b/drivers/net/ethernet/cavium/liquidio/octeon_nic.h
index c139fc423764..8341faaa0c24 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_nic.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_nic.h
@@ -277,7 +277,7 @@ int octnet_send_nic_data_pkt(struct octeon_device *oct,
/** Send a NIC control packet to the device
* @param oct - octeon device pointer
- * @param nctrl - control structure with command, timout, and callback info
+ * @param nctrl - control structure with command, timeout, and callback info
* @returns IQ_FAILED if it failed to add to the input queue. IQ_STOP if the
* queue should be stopped, and IQ_SEND_OK if it sent okay.
*/
diff --git a/drivers/net/ethernet/cavium/liquidio/request_manager.c b/drivers/net/ethernet/cavium/liquidio/request_manager.c
index d7cfb20eea00..a983e7f79461 100644
--- a/drivers/net/ethernet/cavium/liquidio/request_manager.c
+++ b/drivers/net/ethernet/cavium/liquidio/request_manager.c
@@ -40,7 +40,7 @@ static void __check_db_timeout(struct octeon_device *oct, u64 iq_no);
static void (*reqtype_free_fn[MAX_OCTEON_DEVICES][REQTYPE_LAST + 1]) (void *);
-/* Define this to return the request status comaptible to old code */
+/* Define this to return the request status compatible to old code */
/*#define OCTEON_USE_OLD_REQ_STATUS*/
/* Return 0 on success, 1 on failure */
diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h
index 090d6b83982a..bb3f4fa6b995 100644
--- a/drivers/net/ethernet/cavium/thunder/nic.h
+++ b/drivers/net/ethernet/cavium/thunder/nic.h
@@ -97,7 +97,7 @@
* This value ensures that once a packet has been "accepted"
* for reception it will not get dropped due to non-availability
* of CQ descriptor. An errata in HW mandates this value to be
- * atleast 0x100.
+ * at least 0x100.
*/
#define NICPF_CQM_MIN_DROP_LEVEL 0x100
diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 0ec65ec634df..086f32b61580 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -595,7 +595,7 @@ static void nic_config_rss(struct nicpf *nic, struct rss_cfg_msg *cfg)
nic_reg_write(nic, idx_addr | (cpi_base << 3), cpi_cfg);
}
-/* 4 level transmit side scheduler configutation
+/* 4 level transmit side scheduler configuration
* for TNS bypass mode
*
* Sample configuration for SQ0 on 88xx
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index b59735d0e065..238e85bf3b4f 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -3273,7 +3273,7 @@ void t3_sge_stop_dma(struct adapter *adap)
}
/**
- * t3_sge_stop - disable SGE operation completly
+ * t3_sge_stop - disable SGE operation completely
* @adap: the adapter
*
* Called from process context. Disables the DMA engine and any
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
index 7d5204834ee2..a4903e149e5f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -50,7 +50,7 @@ void cxgb4_dcb_version_init(struct net_device *dev)
struct port_info *pi = netdev2pinfo(dev);
struct port_dcb_info *dcb = &pi->dcb;
- /* Any writes here are only done on kernels that exlicitly need
+ /* Any writes here are only done on kernels that explicitly need
* a specific version, say < 2.6.38 which only support CEE
*/
dcb->dcb_version = FW_PORT_DCB_VER_AUTO;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 0092bc16f887..c58cb4078b97 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1614,7 +1614,7 @@ static int set_rss_table(struct net_device *dev,
if (!rxfh->indir)
return 0;
- /* Interface must be brought up atleast once */
+ /* Interface must be brought up at least once */
if (pi->adapter->flags & CXGB4_FULL_INIT_DONE) {
for (i = 0; i < pi->rss_size; i++)
pi->rss[i] = rxfh->indir[i];
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 29d7b786e51e..f4b14bbbe512 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -9825,7 +9825,7 @@ int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
QUENUMSELECT_V(qid));
v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
- addr = CIMQBASE_G(v) * 64; /* muliple of 256 -> muliple of 4 */
+ addr = CIMQBASE_G(v) * 64; /* multiple of 256 -> multiple of 4 */
nwords = CIMQSIZE_G(v) * 64; /* same */
if (n > nwords)
n = nwords;
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
index 31fab2415743..b4374ca1d653 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
@@ -2194,7 +2194,7 @@ static void __iomem *bar2_address(struct adapter *adapter,
* @rspq: pointer to the new rxq's Response Queue to be filled in
* @iqasynch: if 0, a normal rspq; if 1, an asynchronous event queue
* @dev: the network device associated with the new rspq
- * @intr_dest: MSI-X vector index (overriden in MSI mode)
+ * @intr_dest: MSI-X vector index (overridden in MSI mode)
* @fl: pointer to the new rxq's Free List to be filled in
* @hnd: the interrupt handler to invoke for the rspq
*/
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index fc8b1cb950a1..98c43315eb97 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -257,9 +257,9 @@ control_dc_dc(struct net_device *dev, int on_not_off)
struct net_local *lp = netdev_priv(dev);
unsigned int selfcontrol;
unsigned long timenow = jiffies;
- /* control the DC to DC convertor in the SelfControl register.
+ /* control the DC to DC converter in the SelfControl register.
* Note: This is hooked up to a general purpose pin, might not
- * always be a DC to DC convertor.
+ * always be a DC to DC converter.
*/
selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index f38a10c79907..fa52e099409c 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -373,7 +373,7 @@ static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
rx_tail, status, len);
if ((status & 0x38000300) != 0x0300) {
- /* Ingore earlier buffers. */
+ /* Ignore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
netif_warn(de, rx_err, de->dev,
"Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 0a12cb9b3ba7..8c02771b28e4 100644
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -177,7 +177,7 @@ int tulip_poll(struct napi_struct *napi, int budget)
pkt_len > 1518) {
if ((status & (RxLengthOver2047 |
RxWholePkt)) != RxWholePkt) {
- /* Ingore earlier buffers. */
+ /* Ignore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
dev_warn(&dev->dev,
@@ -408,7 +408,7 @@ static int tulip_rx(struct net_device *dev)
pkt_len > 1518) {
if ((status & (RxLengthOver2047 |
RxWholePkt)) != RxWholePkt) {
- /* Ingore earlier buffers. */
+ /* Ignore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
netdev_warn(dev,
diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
index 55d6fc99f40b..0c9694d2b38a 100644
--- a/drivers/net/ethernet/dec/tulip/media.c
+++ b/drivers/net/ethernet/dec/tulip/media.c
@@ -24,7 +24,7 @@
/* Read and write the MII registers using software-generated serial
MDIO protocol. It is just different enough from the EEPROM protocol
- to not share code. The maxium data clock rate is 2.5 Mhz. */
+ to not share code. The maximum data clock rate is 2.5 Mhz. */
#define MDIO_SHIFT_CLK 0x10000
#define MDIO_DATA_WRITE0 0x00000
#define MDIO_DATA_WRITE1 0x20000
diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
index 5e010e1fa6f7..e39e5c78d4cc 100644
--- a/drivers/net/ethernet/dec/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
@@ -250,7 +250,7 @@ enum t21143_csr6_bits {
csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */
csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */
- csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
+ csr6_ps = (1<<18), /* Port Select. 0 (default) = 10baseT, 1 = 100baseTX: can't be set */
csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */
csr6_trh = (1<<15), /* Transmit Threshold high bit */
csr6_trl = (1<<14), /* Transmit Threshold low bit */
@@ -274,7 +274,7 @@ enum t21143_csr6_bits {
csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
/* set both and you get (PHY) loopback */
- csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */
+ csr6_fd = (1<<9), /* Full duplex mode, disables heartbeat, no loopback */
csr6_pm = (1<<7), /* Pass All Multicast */
csr6_pr = (1<<6), /* Promiscuous mode */
csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index a5581f1d0141..be9199f55a8a 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -1188,7 +1188,7 @@ static int netdev_rx(struct net_device *dev)
break;
if ((status & 0x38008300) != 0x0300) {
if ((status & 0x38000300) != 0x0300) {
- /* Ingore earlier buffers. */
+ /* Ignore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
dev_warn(&dev->dev,
"Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 6f1046c9cc51..27b405e93c64 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -1820,7 +1820,7 @@ static void dpaa2_eth_seed_pools(struct dpaa2_eth_priv *priv)
/*
* Drain the specified number of buffers from one of the DPNI's private buffer
* pools.
- * @count must not exceeed DPAA2_ETH_BUFS_PER_CMD
+ * @count must not exceed DPAA2_ETH_BUFS_PER_CMD
*/
static void dpaa2_eth_drain_bufs(struct dpaa2_eth_priv *priv, int bpid,
int count)
diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
index e2d8c58deef0..c1d588337751 100644
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
@@ -1311,7 +1311,7 @@ int memac_initialization(struct mac_device *mac_dev,
/* Most boards should use MLO_AN_INBAND, but existing boards don't have
* a managed property. Default to MLO_AN_INBAND rather than MLO_AN_PHY.
- * Phylink will allow this to be overriden by a fixed link. We need to
+ * Phylink will allow this to be overridden by a fixed link. We need to
* be careful and not enable this if we are using MII or RGMII, since
* those configurations modes don't use in-band autonegotiation.
*/
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index cf636fc5aafa..332881c9daed 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1041,7 +1041,7 @@ static void gfar_halt(struct gfar_private *priv)
struct gfar __iomem *regs = priv->gfargrp[0].regs;
u32 tempval;
- /* Dissable the Rx/Tx hw queues */
+ /* Disable the Rx/Tx hw queues */
gfar_write(®s->rqueue, 0);
gfar_write(®s->tqueue, 0);
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 68b59d3202e3..9ad4d426ed1c 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -1176,7 +1176,7 @@ struct gfar_private {
extended_hash:1,
bd_stash_en:1,
rx_filer_enable:1,
- /* Enable priorty based Tx scheduling in Hw */
+ /* Enable priority based Tx scheduling in Hw */
prio_sched_en:1,
/* Flow control flags */
pause_aneg_en:1,
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index 91391a49fcea..a59fd280a045 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -591,7 +591,7 @@ static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en)
#define HILINK_ACCESS_SEL_CFG 0x40008
/* hilink4 & hilink3 use the same xge training and
* xge u adaptor. There is a hilink access sel cfg
- * register to select which one to be configed
+ * register to select which one to be configured
*/
if ((!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) &&
(mac_cb->mac_id <= 3))
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
index 5013beb4d282..408d36d85fb1 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
@@ -139,7 +139,7 @@ static void hns_ppe_set_vlan_strip(struct hns_ppe_cb *ppe_cb, int en)
}
/**
- * hns_ppe_checksum_hw - set ppe checksum caculate
+ * hns_ppe_checksum_hw - set ppe checksum calculate
* @ppe_cb: ppe device
* @value: value
*/
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index e905f10b894e..d819d2bb3450 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1230,7 +1230,7 @@ static void hns_nic_update_stats(struct net_device *netdev)
h->dev->ops->update_stats(h, &netdev->stats);
}
-/* set mac addr if it is configed. or leave it to the AE driver */
+/* set mac addr if it is configured. or leave it to the AE driver */
static void hns_init_mac_addr(struct net_device *ndev)
{
struct hns_nic_priv *priv = netdev_priv(ndev);
@@ -2317,7 +2317,7 @@ static int hns_nic_dev_probe(struct platform_device *pdev)
ret = device_property_read_u32(dev, "port-id", &port_id);
if (ret)
goto out_read_prop_fail;
- /* for old dts, we need to caculate the port offset */
+ /* for old dts, we need to calculate the port offset */
port_id = port_id < HNS_SRV_OFFSET ? port_id + HNS_DEBUG_OFFSET
: port_id - HNS_SRV_OFFSET;
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index e6af939c1c19..bf35f55f5b8f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10527,7 +10527,7 @@ static int hclge_get_link_diagnosis_info(struct hnae3_handle *handle,
}
/* After disable sriov, VF still has some config and info need clean,
- * which configed by PF.
+ * which configured by PF.
*/
static void hclge_clear_vport_vf_info(struct hclge_vport *vport, int vfid)
{
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 00c3f2548bf6..bf533b8f46ae 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -35,7 +35,7 @@ enum hclge_shaper_level {
* IR(Mbps) = ------------------------- * CLOCK(1000Mbps)
* Tick * (2 ^ IR_s)
*
- * @return: 0: calculate sucessful, negative: fail
+ * @return: 0: calculate successful, negative: fail
*/
static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
struct hclge_shaper_ir_para *ir_para,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 063a692c2b41..5d14d29b0296 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1880,7 +1880,7 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev)
* from PF as cmdq would be in unreliable state i.e. mailbox
* communication between PF and VF would be broken.
*
- * if we are never geting into pending state it means either:
+ * if we are never getting into pending state it means either:
* 1. PF is not receiving our request which could be due to IMP
* reset
* 2. PF is screwed
diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h
index 09d3ac374b2d..38b9b623fa7a 100644
--- a/drivers/net/ethernet/ibm/emac/emac.h
+++ b/drivers/net/ethernet/ibm/emac/emac.h
@@ -2,7 +2,7 @@
/*
* drivers/net/ethernet/ibm/emac/emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
diff --git a/drivers/net/ethernet/ibm/emac/phy.h b/drivers/net/ethernet/ibm/emac/phy.h
index 2184e8373ee5..497639202bd3 100644
--- a/drivers/net/ethernet/ibm/emac/phy.h
+++ b/drivers/net/ethernet/ibm/emac/phy.h
@@ -50,7 +50,7 @@ struct mii_phy {
struct mii_phy_def *def;
u32 advertising; /* Ethtool ADVERTISED_* defines */
u32 features; /* Copied from mii_phy_def.features
- or determined automaticaly */
+ or determined automatically */
int address; /* PHY address */
int mode; /* PHY mode */
int gpcs_address; /* GPCS PHY address */
diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h
index 860494ff3714..3773b699d2e1 100644
--- a/drivers/net/ethernet/jme.h
+++ b/drivers/net/ethernet/jme.h
@@ -660,7 +660,7 @@ enum jme_rxcs_bit_masks {
RXCS_WAKEUP = 0x00000040, /* Enable receive wakeup packet */
RXCS_MAGIC = 0x00000020, /* Enable receive magic packet */
RXCS_SHORT = 0x00000010, /* Enable receive short packet */
- RXCS_ABORT = 0x00000008, /* Enable receive errorr packet */
+ RXCS_ABORT = 0x00000008, /* Enable receive error packet */
RXCS_QST = 0x00000004, /* Receive queue start */
RXCS_SUSPEND = 0x00000002,
RXCS_ENABLE = 0x00000001,
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 061fcd444d50..3ed5670f01c2 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -729,7 +729,7 @@
#define MVPP2_MAX_TXQ 8
/* MVPP2_MAX_TSO_SEGS is the maximum number of fragments to allow in the GSO
- * skb. As we need a maxium of two descriptors per fragments (1 header, 1 data),
+ * skb. As we need a maximum of two descriptors per fragments (1 header, 1 data),
* multiply this value by two to count the maximum number of skb descs needed.
*/
#define MVPP2_MAX_TSO_SEGS 300
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index 93e978bdf303..ad677cfddb4d 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -382,7 +382,7 @@ static int mvpp2_prs_flow_find(struct mvpp2 *priv, int flow)
struct mvpp2_prs_entry pe;
int tid;
- /* Go through the all entires with MVPP2_PRS_LU_FLOWS */
+ /* Go through the all entries with MVPP2_PRS_LU_FLOWS */
for (tid = MVPP2_PRS_TCAM_SRAM_SIZE - 1; tid >= 0; tid--) {
u8 bits;
@@ -1212,7 +1212,7 @@ static void mvpp2_prs_mh_init(struct mvpp2 *priv)
mvpp2_prs_hw_write(priv, &pe);
}
-/* Set default entires (place holder) for promiscuous, non-promiscuous and
+/* Set default entries (place holder) for promiscuous, non-promiscuous and
* multicast MAC addresses
*/
static void mvpp2_prs_mac_init(struct mvpp2 *priv)
@@ -2241,7 +2241,7 @@ mvpp2_prs_mac_da_range_find(struct mvpp2 *priv, int pmap, const u8 *da,
struct mvpp2_prs_entry pe;
int tid;
- /* Go through the all entires with MVPP2_PRS_LU_MAC */
+ /* Go through the all entries with MVPP2_PRS_LU_MAC */
for (tid = MVPP2_PE_MAC_RANGE_START;
tid <= MVPP2_PE_MAC_RANGE_END; tid++) {
unsigned int entry_pmap;
@@ -2539,7 +2539,7 @@ int mvpp2_prs_def_flow(struct mvpp2_port *port)
/* Such entry not exist */
if (tid < 0) {
- /* Go through the all entires from last to first */
+ /* Go through the all entries from last to first */
tid = mvpp2_prs_tcam_first_free(port->priv,
MVPP2_PE_LAST_FREE_TID,
MVPP2_PE_FIRST_FREE_TID);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index 719b3618eeb5..309244fe8754 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -84,7 +84,7 @@ enum npc_kpu_lc_ltype {
NPC_LT_LC_CUSTOM1 = 0xF,
};
-/* Don't modify Ltypes upto SCTP, otherwise it will
+/* Don't modify Ltypes up to SCTP, otherwise it will
* effect flow tag calculation and thus RSS.
*/
enum npc_kpu_ld_ltype {
@@ -140,7 +140,7 @@ enum npc_kpu_lg_ltype {
NPC_LT_LG_CUSTOM1 = 0xF,
};
-/* Don't modify Ltypes upto SCTP, otherwise it will
+/* Don't modify Ltypes up to SCTP, otherwise it will
* effect flow tag calculation and thus RSS.
*/
enum npc_kpu_lh_ltype {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 153eb57bad06..d80d2c00bd84 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4974,7 +4974,7 @@ static void rvu_nix_setup_capabilities(struct rvu *rvu, int blkaddr)
/* On OcteonTx2 DWRR quantum is directly configured into each of
* the transmit scheduler queues. And PF/VF drivers were free to
- * config any value upto 2^24.
+ * config any value up to 2^24.
* On CN10K, HW is modified, the quantum configuration at scheduler
* queues is in terms of weight. And SW needs to setup a base DWRR MTU
* at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c
index 3e1bf22cba69..f98ef5431c90 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c
@@ -301,7 +301,7 @@ static void cn10k_get_ingress_rate_cfg(u64 rate, u32 *rate_exp,
* policer timeunit * 2^rdiv ie 2 * 2^rdiv usecs, to the token bucket.
* Here policer timeunit is 2 usecs and rate is in bits per sec.
* Since floating point cannot be used below algorithm uses 1000000
- * scale factor to support rates upto 100Gbps.
+ * scale factor to support rates up to 100Gbps.
*/
tmp = rate * 32 * 2;
if (tmp < 256000000) {
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c
index f110dfa42360..91d346d114af 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c
@@ -67,7 +67,7 @@ static int otx2_pfc_txschq_alloc_one(struct otx2_nic *pfvf, u8 prio)
if (!req)
return -ENOMEM;
- /* Request one schq per level upto max level as configured
+ /* Request one schq per level up to max level as configured
* link config level. These rest of the scheduler can be
* same as hw.txschq_list.
*/
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index c995f2900859..596ab7a4c080 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -3007,7 +3007,7 @@ int otx2_realloc_msix_vectors(struct otx2_nic *pf)
int num_vec, err;
/* NPA interrupts are inot registered, so alloc only
- * upto NIX vector offset.
+ * up to NIX vector offset.
*/
num_vec = hw->nix_msixoff;
num_vec += NIX_LF_CINT_VEC_START + hw->max_queues;
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index bbbbbba63e15..2370b2ddba6b 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -514,7 +514,7 @@ static int add_del_hash_entry(struct pxa168_eth_private *pep,
/*
* ----------------------------------------------------------------------------
* Create an addressTable entry from MAC address info
- * found in the specifed net_device struct
+ * found in the specified net_device struct
*
* Input : pointer to ethernet interface network device structure
* Output : N/A
@@ -806,7 +806,7 @@ static int rxq_process(struct net_device *dev, int budget)
stats->rx_bytes += rx_desc->byte_cnt;
/*
* In case received a packet without first / last bits on OR
- * the error summary bit is on, the packets needs to be droped.
+ * the error summary bit is on, the packets needs to be dropped.
*/
if (((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
(RX_FIRST_DESC | RX_LAST_DESC))
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index f1c3da04de7f..034dda0ec06b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -1553,7 +1553,7 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec)
mutex_lock(&priv->msix_ctl.pool_lock);
priv->eq_table.eq[eq_vec].ref_count--;
- /* once we allocated EQ, we don't release it because it might be binded
+ /* once we allocated EQ, we don't release it because it might be bound
* to cpu_rmap.
*/
mutex_unlock(&priv->msix_ctl.pool_lock);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c
index 89490f687a9c..402973ca8c1b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c
@@ -353,7 +353,7 @@ add_post_rule(struct mlx5_eswitch *esw, struct mlx5e_sample_flow *sample_flow,
/* Allocate default table per vport, chain and prio. Otherwise, there is
* only one default table for the same sampler object. Rules with different
* prio and chain may overlap. For CT sample action, per vport default
- * table is needed to resotre the metadata.
+ * table is needed to restore the metadata.
*/
per_vport_tbl_attr.chain = attr->chain;
per_vport_tbl_attr.prio = attr->prio;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
index d9be0d9c9a13..7bcc49e6fd43 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
@@ -67,7 +67,7 @@ static u64 tout_convert_reg_field_to_ms(u32 to_mul, u32 to_val)
u64 msec = to_val;
to_mul &= 0x3;
- /* convert hours/minutes/seconds to miliseconds */
+ /* convert hours/minutes/seconds to milliseconds */
if (to_mul)
msec *= 1000 * int_pow(60, to_mul - 1);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/i2c.c b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
index 60a50222f33a..2e2539b24fe7 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/i2c.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
@@ -670,7 +670,7 @@ static int mlxsw_i2c_probe(struct i2c_client *client)
* For this purpose QUERY_FW is to be issued with opcode modifier equal
* 0x01. For such command the output parameter is an immediate value.
* Here QUERY_FW command is invoked for ASIC probing and for getting
- * local mailboxes addresses from immedate output parameters.
+ * local mailboxes addresses from immediate output parameters.
*/
/* Prepare and write out Command Interface Register for transaction */
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 01fcbd1c8d01..6de4e653cc38 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -2709,7 +2709,7 @@ MLXSW_REG_DEFINE(pagt, MLXSW_REG_PAGT_ID, MLXSW_REG_PAGT_LEN);
* Range 0 .. cap_max_acl_group_size (hard coded to 16 for now)
* Total number of ACLs in all groups must be lower or equal
* to cap_max_acl_tot_groups
- * Note: a group which is binded must not be invalidated
+ * Note: a group which is bound must not be invalidated
* Access: Index
*/
MLXSW_ITEM32(reg, pagt, size, 0x00, 0, 8);
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index a5b803eb8c8a..669501e92545 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -300,7 +300,7 @@ struct sonic_local {
int reg_offset;
void *descriptors;
/* Crud. These areas have to be within the same 64K. Therefore
- we allocate a desriptors page, and point these to places within it. */
+ we allocate a descriptors page, and point these to places within it. */
void *cda; /* CAM descriptor area */
void *tda; /* Transmit descriptor area */
void *rra; /* Receive resource area */
diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index f0218a0eab5c..40130164dad2 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -794,7 +794,7 @@ struct fe_priv {
void __iomem *base;
/* rx specific fields.
- * Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
+ * Locking: Within irq handler or disable_irq+spin_lock(&np->lock);
*/
union ring_type get_rx, put_rx, last_rx;
struct nv_skb_map *get_rx_ctx, *put_rx_ctx;
@@ -815,7 +815,7 @@ struct fe_priv {
struct nv_txrx_stats __percpu *txrx_stats;
/* media detection workaround.
- * Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
+ * Locking: Within irq handler or disable_irq+spin_lock(&np->lock);
*/
int need_linktimer;
unsigned long link_timeout;
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
index fef4b2b0b1f2..79d6a819bf90 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
@@ -17,7 +17,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter)
int timeout = 0;
do {
- /* give atleast 1ms for firmware to respond */
+ /* give at least 1ms for firmware to respond */
msleep(1);
if (++timeout > NX_OS_CRB_RETRY_COUNT)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index b70262e70baf..89b947f82cf0 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -561,7 +561,7 @@ int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count)
* block in the ILT client. This is later used to
* configure the CDU segment offset registers and
* results in an FL command for TIDs of this
- * segement behaves as regular load commands
+ * segment behaves as regular load commands
* (loading TIDs from the working memory).
*/
line = p_cli->pf_blks[CDUT_SEG_BLK(i)].start_line;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index dd75c47758e1..95befe4aee5e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -305,7 +305,7 @@ void qed_db_recovery_execute(struct qed_hwfn *p_hwfn)
DP_NOTICE(p_hwfn, "Executing doorbell recovery. Counter was %d\n",
p_hwfn->db_recovery_info.db_recovery_counter);
- /* Track amount of times recovery was executed */
+ /* Track number of times recovery was executed */
p_hwfn->db_recovery_info.db_recovery_counter++;
/* Protect the list */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
index 9bd0565fe8ab..50699d600b8e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
@@ -783,7 +783,7 @@ struct qed_mcp_info {
u16 mfw_mb_length;
u32 mcp_hist;
- /* Capabilties negotiated with the MFW */
+ /* Capabilities negotiated with the MFW */
u32 capabilities;
/* S/N for debug data mailbox commands */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index d7c8fadb49de..9728d583b891 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -909,7 +909,7 @@ struct qlcnic_mac_vlan_list {
#define QLCNIC_LRO_REQUEST_CLEANUP 4
-/* Capabilites received */
+/* Capabilities received */
#define QLCNIC_FW_CAPABILITY_TSO BIT_1
#define QLCNIC_FW_CAPABILITY_BDG BIT_8
#define QLCNIC_FW_CAPABILITY_FVLANTX BIT_9
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 47cd9ec665ee..ff337a917243 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1957,9 +1957,9 @@ static void qlcnic_83xx_template_end(struct qlcnic_adapter *p_dev)
* qlcnic_83xx_exec_template_cmd
*
* @p_dev: adapter structure
-* @p_buff: Poiter to instruction template
+* @p_buff: Pointer to instruction template
*
-* Template provides instructions to stop, restart and initalize firmware.
+* Template provides instructions to stop, restart and initialize firmware.
* These instructions are abstracted as a series of read, write and
* poll operations on hardware registers. Register information and operation
* specifics are not exposed to the driver. Driver reads the template from
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index eb827b86ecae..1b94c42d669b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -95,7 +95,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
int timeout = 0, err = 0;
do {
- /* give atleast 1ms for firmware to respond */
+ /* give at least 1ms for firmware to respond */
mdelay(1);
if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index ff4f7cd20c79..23ae76ca81db 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -640,7 +640,7 @@ static int qlcnic_max_rings(struct qlcnic_adapter *adapter, u8 ring_cnt,
void qlcnic_set_tx_ring_count(struct qlcnic_adapter *adapter, u8 tx_cnt)
{
- /* 83xx adapter does not have max_tx_rings intialized in probe */
+ /* 83xx adapter does not have max_tx_rings initialized in probe */
if (adapter->max_tx_rings)
adapter->drv_tx_rings = qlcnic_max_rings(adapter, tx_cnt,
QLCNIC_TX_QUEUE);
@@ -650,7 +650,7 @@ void qlcnic_set_tx_ring_count(struct qlcnic_adapter *adapter, u8 tx_cnt)
void qlcnic_set_sds_ring_count(struct qlcnic_adapter *adapter, u8 rx_cnt)
{
- /* 83xx adapter does not have max_sds_rings intialized in probe */
+ /* 83xx adapter does not have max_sds_rings initialized in probe */
if (adapter->max_sds_rings)
adapter->drv_sds_rings = qlcnic_max_rings(adapter, rx_cnt,
QLCNIC_RX_QUEUE);
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
index d5c688a8d7be..a4bba0be7dc5 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
@@ -578,7 +578,7 @@ void emac_mac_stop(struct emac_adapter *adpt)
emac_reg_update32(adpt->base + EMAC_RXQ_CTRL_0, RXQ_EN, 0);
emac_reg_update32(adpt->base + EMAC_TXQ_CTRL_0, TXQ_EN, 0);
emac_reg_update32(adpt->base + EMAC_MAC_CTRL, TXEN | RXEN, 0);
- usleep_range(1000, 1050); /* stopping mac may take upto 1msec */
+ usleep_range(1000, 1050); /* stopping mac may take up to 1msec */
}
/* Free all descriptors of given transmit queue */
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 8241bcf76664..71eb61246254 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -1201,7 +1201,7 @@ static const char mii_2_8139_map[8] = {
#ifdef CONFIG_8139TOO_8129
-/* Syncronize the MII management interface by shifting 32 one bits out. */
+/* Synchronize the MII management interface by shifting 32 one bits out. */
static void mdio_sync (void __iomem *ioaddr)
{
int i;
diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index e3cd4f7c1380..372974ebccb5 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -937,7 +937,7 @@ static void rtase_hw_config(struct net_device *dev)
RTASE_RX_MX_DMA_MASK);
rtase_w16(tp, RTASE_RX_CONFIG_0, reg_data16);
- /* new rx descritpor */
+ /* new rx descriptor */
reg_data16 = rtase_r16(tp, RTASE_RX_CONFIG_1);
reg_data16 |= RTASE_RX_NEW_DESC_FORMAT_EN | RTASE_PCIE_NEW_FLOW;
u16p_replace_bits(®_data16, 0xF, RTASE_RX_MAX_FETCH_DESC_MASK);
diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c
index 7967a0ee320b..82dff0a52a12 100644
--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -619,7 +619,7 @@ sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev)
* we are changing all of the following.
* 2) Do no allow the HPC to look at a new descriptor until
* we have completely set up it's state. This means, do
- * not clear HPCDMA_EOX in the current last descritptor
+ * not clear HPCDMA_EOX in the current last descriptor
* until the one we are adding looks consistent and could
* be processes right now.
* 3) The tx interrupt code must notice when we've added a new
diff --git a/drivers/net/ethernet/sfc/falcon/falcon.c b/drivers/net/ethernet/sfc/falcon/falcon.c
index fb1d19b7c419..10cfce054de9 100644
--- a/drivers/net/ethernet/sfc/falcon/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon/falcon.c
@@ -2638,7 +2638,7 @@ void falcon_start_nic_stats(struct ef4_nic *efx)
spin_unlock_bh(&efx->stats_lock);
}
-/* We don't acutally pull stats on falcon. Wait 10ms so that
+/* We don't actually pull stats on falcon. Wait 10ms so that
* they arrive when we call this just after start_stats
*/
static void falcon_pull_nic_stats(struct ef4_nic *efx)
diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h
index b9866e389e6d..b00e7c100566 100644
--- a/drivers/net/ethernet/sfc/mcdi_pcol.h
+++ b/drivers/net/ethernet/sfc/mcdi_pcol.h
@@ -5736,7 +5736,7 @@
/* Enum values, see field(s): */
/* MC_CMD_ETH_TECH/TECH */
/* Pause abilities to advertise during auto-negotiation. Valid when auto-
- * negotation is enabled and MC_CMD_SET_MAC_IN/FCTL is set to
+ * negotiation is enabled and MC_CMD_SET_MAC_IN/FCTL is set to
* MC_CMD_FCNTL_AUTO. If auto-negotiation is disabled the driver must
* explicitly configure pause mode with MC_CMD_SET_MAC.
*/
@@ -10173,7 +10173,7 @@
* configuration.
*/
#define MC_CMD_GET_FIXED_PORT_PROPERTIES_IN_LEN 4
-/* Handle to the port to from which to retreive properties */
+/* Handle to the port to from which to retrieve properties */
#define MC_CMD_GET_FIXED_PORT_PROPERTIES_IN_PORT_HANDLE_OFST 0
#define MC_CMD_GET_FIXED_PORT_PROPERTIES_IN_PORT_HANDLE_LEN 4
@@ -13547,7 +13547,7 @@
* an ancestor of the current user (see MC_CMD_SET_VI_USER). Note that LL
* queues require this to be called after allocation but before initialisation
* of the queue. TLP options of a queue are fixed after queue is initialised,
- * with the values set to current global value or they can be overriden using
+ * with the values set to current global value or they can be overridden using
* this command. At LL queue allocation, all overrides are cleared.
*/
#define MC_CMD_SET_VI_TLP_PROCESSING 0xb1
@@ -21387,7 +21387,7 @@
#define MC_CMD_PRIVILEGE_MASK_IN_GRP_ALL_MULTICAST 0x200 /* enum */
#define MC_CMD_PRIVILEGE_MASK_IN_GRP_PROMISCUOUS 0x400 /* enum */
/* enum: Allows to set the TX packets' source MAC address to any arbitrary MAC
- * adress.
+ * address.
*/
#define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING_TX 0x800
/* enum: Privilege that allows a Function to change the MAC address configured
diff --git a/drivers/net/ethernet/sfc/siena/mcdi_pcol.h b/drivers/net/ethernet/sfc/siena/mcdi_pcol.h
index b81b0aa460d2..4d1da698c524 100644
--- a/drivers/net/ethernet/sfc/siena/mcdi_pcol.h
+++ b/drivers/net/ethernet/sfc/siena/mcdi_pcol.h
@@ -6861,7 +6861,7 @@
/***********************************/
/* MC_CMD_CLP
* Perform a CLP related operation, see SF-110495-PS for details of CLP
- * processing. This command has been extended to accomodate the requirements of
+ * processing. This command has been extended to accommodate the requirements of
* different manufacturers which are to be found in SF-119187-TC, SF-119186-TC,
* SF-120509-TC and SF-117282-PS.
*/
@@ -16293,7 +16293,7 @@
/***********************************/
/* MC_CMD_GET_LICENSED_V3_FEATURE_STATES
- * Query the state of an one or more licensed features. (Note that the actual
+ * Query the state of a one or more licensed features. (Note that the actual
* state may be invalidated by the MC_CMD_LICENSING_V3 OP_UPDATE_LICENSE
* operation or a reboot of the MC.) Used for V3 licensing (Medford)
*/
@@ -16798,7 +16798,7 @@
#define MC_CMD_PRIVILEGE_MASK_IN_GRP_ALL_MULTICAST 0x200 /* enum */
#define MC_CMD_PRIVILEGE_MASK_IN_GRP_PROMISCUOUS 0x400 /* enum */
/* enum: Allows to set the TX packets' source MAC address to any arbitrary MAC
- * adress.
+ * address.
*/
#define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING_TX 0x800
/* enum: Privilege that allows a Function to change the MAC address configured
diff --git a/drivers/net/ethernet/sfc/siena/ptp.c b/drivers/net/ethernet/sfc/siena/ptp.c
index 0b723a127364..44c9f93d466d 100644
--- a/drivers/net/ethernet/sfc/siena/ptp.c
+++ b/drivers/net/ethernet/sfc/siena/ptp.c
@@ -1835,7 +1835,7 @@ static void ptp_event_failure(struct efx_nic *efx, int expected_frag_len)
/* Process a completed receive event. Put it on the event queue and
* start worker thread. This is required because event and their
- * correspoding packets may come in either order.
+ * corresponding packets may come in either order.
*/
static void ptp_event_rx(struct efx_nic *efx, struct efx_ptp_data *ptp)
{
diff --git a/drivers/net/ethernet/sgi/meth.h b/drivers/net/ethernet/sgi/meth.h
index 2ba15c263e8b..973692a3b6ca 100644
--- a/drivers/net/ethernet/sgi/meth.h
+++ b/drivers/net/ethernet/sgi/meth.h
@@ -37,7 +37,7 @@ typedef struct tx_packet_hdr {
u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/
cat_ptr2_valid:1,
cat_ptr1_valid:1;
- u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/
+ u64 tx_int_flag:1; /*Generate TX interrupt when packet has been sent*/
u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/
u64 data_offset:7; /*Starting byte offset in ring data block*/
u64 data_len:16; /*Length of valid data in bytes-1*/
diff --git a/drivers/net/ethernet/silan/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
index ff4197f5e46d..55f473b16d82 100644
--- a/drivers/net/ethernet/silan/sc92031.c
+++ b/drivers/net/ethernet/silan/sc92031.c
@@ -87,7 +87,7 @@ MODULE_PARM_DESC(media, "Media type (0x00 = autodetect,"
enum silan_registers {
Config0 = 0x00, // Config0
Config1 = 0x04, // Config1
- RxBufWPtr = 0x08, // Rx buffer writer poiter
+ RxBufWPtr = 0x08, // Rx buffer writer pointer
IntrStatus = 0x0C, // Interrupt status
IntrMask = 0x10, // Interrupt mask
RxbufAddr = 0x14, // Rx buffer start address
@@ -109,8 +109,8 @@ enum silan_registers {
TimerIntr = 0x78, // Timer interrupt register
PMConfig = 0x7C, // Power Manager configuration
CRC0 = 0x80, // Power Manager CRC ( Two 32bit regisers)
- Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit regiser)
- LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit regiser)
+ Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit register)
+ LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit register)
TestD0 = 0xD0,
TestD4 = 0xD4,
TestD8 = 0xD8,
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 6e9afd9042f7..35e1fe22806f 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -2394,7 +2394,7 @@ static void set_rx_mode(struct net_device *net_dev)
for (i = 0; i < table_entries; i++)
mc_filter[i] = 0xffff;
} else {
- /* Accept Broadcast packet, destination address matchs our
+ /* Accept Broadcast packet, destination address matches our
* MAC address, use Receive Filter to reject unwanted MCAST
* packets */
struct netdev_hw_addr *ha;
diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index 0c97211b6254..020ff5cd5690 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -563,7 +563,7 @@ static void smsc9420_stop_rx(struct smsc9420_pdata *pd)
smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena);
smsc9420_pci_flush_write(pd);
- /* stop RX MAC prior to stoping DMA */
+ /* stop RX MAC prior to stopping DMA */
mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_RXEN_);
smsc9420_reg_write(pd, MAC_CR, mac_cr);
smsc9420_pci_flush_write(pd);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index f5f9fa67ecd7..cdfdd9806e14 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -1312,7 +1312,7 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
/* Initialize all MSI vectors to invalid so that it can be set
* according to platform data settings below.
- * Note: MSI vector takes value from 0 upto 31 (STMMAC_MSI_VEC_MAX)
+ * Note: MSI vector takes value from 0 up to 31 (STMMAC_MSI_VEC_MAX)
*/
plat->msi_mac_vec = STMMAC_MSI_VEC_MAX;
plat->msi_wol_vec = STMMAC_MSI_VEC_MAX;
diff --git a/drivers/net/ethernet/sun/cassini.h b/drivers/net/ethernet/sun/cassini.h
index 0c24547a4534..e5bfdd0b7a02 100644
--- a/drivers/net/ethernet/sun/cassini.h
+++ b/drivers/net/ethernet/sun/cassini.h
@@ -704,7 +704,7 @@
0x4 = load 3, 0x5 = load 4
0x6 = last detect
0x7 = wait req
- 0x8 = wait req statuss 1st
+ 0x8 = wait req status 1st
0x9 = load st
0xa = bubble mac
0xb = error */
diff --git a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
index 131786aa4d5b..f532e8b6d24f 100644
--- a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
+++ b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
@@ -98,7 +98,7 @@ static int xlgmac_init(struct xlgmac_pdata *pdata)
return ret;
}
- /* Channel and ring params initializtion
+ /* Channel and ring params initialization
* pdata->channel_count;
* pdata->tx_ring_count;
* pdata->rx_ring_count;
diff --git a/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c b/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c
index 76eb7db80f13..1fef9f4b15c0 100644
--- a/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c
+++ b/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c
@@ -1060,7 +1060,7 @@ static void xlgmac_tx_desc_init(struct xlgmac_channel *channel)
int start_index = ring->cur;
int i;
- /* Initialze all descriptors */
+ /* Initialize all descriptors */
for (i = 0; i < ring->dma_desc_count; i++) {
desc_data = XLGMAC_GET_DESC_DATA(ring, i);
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 2cee1f05ac47..6c5bc4479046 100644
--- a/drivers/net/ethernet/tehuti/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -313,7 +313,7 @@ static int bdx_poll(struct napi_struct *napi, int budget)
* @priv: NIC private structure
*
* Firmware is loaded via TXD fifo, so it must be initialized first.
- * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC
+ * Firmware must be loaded once per NIC not per PCI device provided by NIC (NIC
* can have few of them). So all drivers use semaphore register to choose one
* that will actually load FW to NIC.
*/
@@ -1184,7 +1184,7 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
* @budget: maximum number of packets to receive
*/
-/* TBD: replace memcpy func call by explicite inline asm */
+/* TBD: replace memcpy func call by explicit inline asm */
static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget)
{
@@ -1324,13 +1324,13 @@ static void print_rxfd(struct rxf_desc *rxfd)
* 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
* 2) TX Data Fifo - TXD - holds descriptors of full buffers.
*
- * Currently NIC supports TSO, checksuming and gather DMA
+ * Currently NIC supports TSO, checksumming and gather DMA
* UFO and IP fragmentation is on the way
*
* RX SW Data Structures
* ~~~~~~~~~~~~~~~~~~~~~
* txdb - used to keep track of all skbs owned by SW and their dma addresses.
- * For TX case, ownership lasts from geting packet via hard_xmit and until HW
+ * For TX case, ownership lasts from getting packet via hard_xmit and until HW
* acknowledges sent by TXF descriptors.
* Implemented as cyclic buffer.
* fifo - keeps info about fifo's size and location, relevant HW registers,
diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c
index 274a1837025c..e5f563762eb6 100644
--- a/drivers/net/ethernet/ti/tlan.c
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -1299,7 +1299,7 @@ static void tlan_set_multicast_list(struct net_device *dev)
ThunderLAN driver interrupt vectors and table
please see chap. 4, "Interrupt Handling" of the "ThunderLAN
-Programmer's Guide" for more informations on handling interrupts
+Programmer's Guide" for more information on handling interrupts
generated by TLAN based adapters.
******************************************************************************
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index d35d1f3c10a1..ef4632e2adc8 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -1412,7 +1412,7 @@ static const struct ethtool_ops gelic_ether_ethtool_ops = {
/**
* gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
* function (to be called not under interrupt status)
- * @work: work is context of tx timout task
+ * @work: work is context of tx timeout task
*
* called as task when tx hangs, resets interface (if interface is up)
*/
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index c10f1984a5a1..034b1712aca8 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -93,7 +93,7 @@ enum gelic_descr_tx_status {
/* RX descriptor data error bits */
enum gelic_descr_rx_error {
/* bit 31 reserved */
- GELIC_DESCR_RXALNERR = 0x40000000, /* alignement error 10/100M */
+ GELIC_DESCR_RXALNERR = 0x40000000, /* alignment error 10/100M */
GELIC_DESCR_RXOVERERR = 0x20000000, /* oversize error */
GELIC_DESCR_RXRNTERR = 0x10000000, /* Runt error */
GELIC_DESCR_RXIPCHKERR = 0x08000000, /* IP checksum error */
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
index 88669aa53f65..6df4697025fa 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
@@ -556,7 +556,7 @@ static void gelic_wl_parse_ie(u8 *data, size_t len,
/*
- * translate the scan informations from hypervisor to a
+ * translate the scan information from hypervisor to a
* independent format
*/
static char *gelic_wl_translate_scan(struct net_device *netdev,
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index e56ebbdd428d..69ab8c450a1d 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -225,7 +225,7 @@ The chip does not pad to minimum transmit length.
/* This table drives the PCI probe routines. It's mostly boilerplate in all
of the drivers, and will likely be provided by some future kernel.
- Note the matching code -- the first table entry matchs all 56** cards but
+ Note the matching code -- the first table entry matches all 56** cards but
second only the 1234 card.
*/
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index 6d7b6f3b4633..f9e25cf3cd0d 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -302,7 +302,7 @@ VELOCITY_PARAM(DMA_length, "DMA length");
0: indicate the IP header won't be DWORD byte aligned.(Default) .
1: indicate the IP header will be DWORD byte aligned.
In some environment, the IP header should be DWORD byte aligned,
- or the packet will be droped when we receive it. (eg: IPVS)
+ or the packet will be dropped when we receive it. (eg: IPVS)
*/
VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
@@ -311,7 +311,7 @@ VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
#define FLOW_CNTL_MAX 5
/* flow_control[] is used for setting the flow control ability of NIC.
- 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR.
+ 1: hardware default - AUTO (default). Use Hardware default value in ANAR.
2: enable TX flow control.
3: enable RX flow control.
4: enable RX/TX flow control.
@@ -340,10 +340,10 @@ VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
#define WOL_OPT_MIN 0
#define WOL_OPT_MAX 7
/* wol_opts[] is used for controlling wake on lan behavior.
- 0: Wake up if recevied a magic packet. (Default)
+ 0: Wake up if received a magic packet. (Default)
1: Wake up if link status is on/off.
- 2: Wake up if recevied an arp packet.
- 4: Wake up if recevied any unicast packet.
+ 2: Wake up if received an arp packet.
+ 4: Wake up if received any unicast packet.
Those value can be sumed up to support more than one option.
*/
VELOCITY_PARAM(wol_opts, "Wake On Lan options");
diff --git a/drivers/net/fddi/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c
index 4eea3408034b..b722a195d831 100644
--- a/drivers/net/fddi/skfp/cfm.c
+++ b/drivers/net/fddi/skfp/cfm.c
@@ -17,7 +17,7 @@
*/
/*
- * Hardware independent state machine implemantation
+ * Hardware independent state machine implementation
* The following external SMT functions are referenced :
*
* queue_event()
diff --git a/drivers/net/fddi/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c
index 2f5f5f26bb43..e418ab65cb61 100644
--- a/drivers/net/fddi/skfp/ecm.c
+++ b/drivers/net/fddi/skfp/ecm.c
@@ -17,7 +17,7 @@
*/
/*
- * Hardware independent state machine implemantation
+ * Hardware independent state machine implementation
* The following external SMT functions are referenced :
*
* queue_event()
diff --git a/drivers/net/fddi/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c
index 036062376c06..0d4201345f9b 100644
--- a/drivers/net/fddi/skfp/fplustm.c
+++ b/drivers/net/fddi/skfp/fplustm.c
@@ -150,7 +150,7 @@ static u_long read_mdr(struct s_smc *smc, unsigned int addr)
CHECK_NPP() ;
MARR(addr) ;
outpw(FM_A(FM_CMDREG1),FM_IRMEMWO) ;
- CHECK_NPP() ; /* needed for PCI to prevent from timeing violations */
+ CHECK_NPP() ; /* needed for PCI to prevent from timing violations */
/* p = MDRR() ; */ /* bad read values if the workaround */
/* smc->hw.mc_dummy = *((short volatile far *)(addr)))*/
/* is used */
@@ -572,7 +572,7 @@ Note After any ring operational change the transmit complete
The operating system dependent module must enable
the transmit complete interrupt of a queue,
- when it queues the first frame,
- because of no transmit resources are beeing
+ because of no transmit resources are being
available and
- when it escapes from the function llc_restart_tx
while some frames are still queued.
diff --git a/drivers/net/fddi/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h
index e97db826cdd4..0ab49cc0a8bd 100644
--- a/drivers/net/fddi/skfp/h/hwmtm.h
+++ b/drivers/net/fddi/skfp/h/hwmtm.h
@@ -113,7 +113,7 @@ struct hw_modul {
struct s_mbuf_pool mbuf_pool ;
struct hwm_r r ;
- union s_fp_descr volatile *descr_p ; /* points to the desriptor area */
+ union s_fp_descr volatile *descr_p ; /* points to the descriptor area */
u_short pass_SMT ; /* pass SMT frames */
u_short pass_NSA ; /* pass all NSA frames */
diff --git a/drivers/net/fddi/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h
index f30301fcd022..7fe99c12e201 100644
--- a/drivers/net/fddi/skfp/h/sba.h
+++ b/drivers/net/fddi/skfp/h/sba.h
@@ -94,7 +94,7 @@ struct s_sba {
long msg_mib_ov ; /* Current Overhead for this Path*/
long msg_category ; /* Category of the Allocation */
u_long msg_max_t_neg ; /* longest T_Neg acceptable */
- u_long msg_min_seg_siz ; /* minimum segement size */
+ u_long msg_min_seg_siz ; /* minimum segment size */
struct smt_header *sm ; /* points to the rec message */
struct fddi_addr *msg_alloc_addr ; /* Allocation Address */
diff --git a/drivers/net/fddi/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c
index 90e8df6d9a88..745285d4d6d2 100644
--- a/drivers/net/fddi/skfp/pcmplc.c
+++ b/drivers/net/fddi/skfp/pcmplc.c
@@ -16,7 +16,7 @@
*/
/*
- * Hardware independent state machine implemantation
+ * Hardware independent state machine implementation
* The following external SMT functions are referenced :
*
* queue_event()
diff --git a/drivers/net/fddi/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c
index 314623650a84..5708124f05d2 100644
--- a/drivers/net/fddi/skfp/rmt.c
+++ b/drivers/net/fddi/skfp/rmt.c
@@ -16,7 +16,7 @@
*/
/*
- * Hardware independent state machine implemantation
+ * Hardware independent state machine implementation
* The following external SMT functions are referenced :
*
* queue_event()
diff --git a/drivers/net/ipa/ipa_interrupt.h b/drivers/net/ipa/ipa_interrupt.h
index d11c4af14fa2..362fb9eb7900 100644
--- a/drivers/net/ipa/ipa_interrupt.h
+++ b/drivers/net/ipa/ipa_interrupt.h
@@ -21,7 +21,7 @@ enum ipa_irq_id;
* @endpoint_id: Endpoint whose interrupt should be enabled
*
* Note: The "TX" in the name is from the perspective of the IPA hardware.
- * A TX_SUSPEND interrupt arrives on an AP RX enpoint when packet data can't
+ * A TX_SUSPEND interrupt arrives on an AP RX endpoint when packet data can't
* be delivered to the endpoint because it is suspended (or its underlying
* channel is stopped).
*/
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index 299f9a8f30f4..5c39fc3a5d65 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -28,7 +28,7 @@
* devid: which sub-device to use.
* reg: the register.
* mask: if non-zero, ANDed with existing register value.
- * value: ORed with the masked value and written to the regiser.
+ * value: ORed with the masked value and written to the register.
*
*/
static int bcm87xx_of_reg_init(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f71cffa88406..fc67331a8f2c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -526,7 +526,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev)
* reg-page: which register bank to use.
* reg: the register.
* mask: if non-zero, ANDed with existing register value.
- * value: ORed with the masked value and written to the regiser.
+ * value: ORed with the masked value and written to the register.
*
*/
static int marvell_of_reg_init(struct phy_device *phydev)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 1a610a18893b..d157398da060 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -2091,7 +2091,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
/*
*check if we are on the last channel or
- *we exceded the length of the data to
+ *we exceeded the length of the data to
*fragment
*/
if ((nfree <= 0) || (flen > len))
@@ -3305,7 +3305,7 @@ find_compressor(int type)
}
/*
- * Miscelleneous stuff.
+ * Miscellaneous stuff.
*/
static void
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 81d8412ce8e2..4ef641644cf8 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1392,8 +1392,8 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
* pkt_cnt and hdr_off (offset of
* <per-packet metadata entry 1>)
*
- * pkt_cnt is number of entrys in the per-packet metadata.
- * In current firmware there is 2 entrys per packet.
+ * pkt_cnt is number of entries in the per-packet metadata.
+ * In current firmware there is 2 entries per packet.
* The first points to the packet and the
* second is a dummy header.
* This was done probably to align fields in 64-bit and
diff --git a/drivers/net/wan/slic_ds26522.c b/drivers/net/wan/slic_ds26522.c
index cbb99fc5ea9f..353e44e3113f 100644
--- a/drivers/net/wan/slic_ds26522.c
+++ b/drivers/net/wan/slic_ds26522.c
@@ -165,7 +165,7 @@ static int slic_ds26522_init_configure(struct spi_device *spi)
/* Perform RX/TX SRESET,Reset receiver */
slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_SFTRST);
- /* Reset tranceiver */
+ /* Reset transceiver */
slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_SFTRST);
usleep_range(100, 120);
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 8b0d76a47d9f..d1305f8d07f5 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -497,7 +497,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb)
}
spin_unlock_irqrestore(&ch->collect_lock, saveflags);
/*
- * Protect skb against beeing free'd by upper
+ * Protect skb against being free'd by upper
* layers.
*/
refcount_inc(&skb->users);
@@ -688,7 +688,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
}
/*
- * Protect skb against beeing free'd by upper
+ * Protect skb against being free'd by upper
* layers.
*/
refcount_inc(&skb->users);
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 41fe8a043d61..b5fa1726617f 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -208,7 +208,7 @@ struct qeth_vnicc_info {
/*not used unless the microcode gets patched*/
#define QETH_PCI_TIMER_VALUE(card) 3
-/* priority queing */
+/* priority queuing */
#define QETH_PRIOQ_DEFAULT QETH_NO_PRIO_QUEUEING
#define QETH_DEFAULT_QUEUE 2
#define QETH_NO_PRIO_QUEUEING 0
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index 6e2fe186d0dc..69891edcaf96 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -282,7 +282,7 @@ struct inet_bind_hashbucket *
inet_bhash2_addr_any_hashbucket(const struct sock *sk, const struct net *net, int port);
/* This should be called whenever a socket's sk_rcv_saddr (ipv4) or
- * sk_v6_rcv_saddr (ipv6) changes after it has been binded. The socket's
+ * sk_v6_rcv_saddr (ipv6) changes after it has been bound. The socket's
* rcv_saddr field should already have been updated when this is called.
*/
int inet_bhash2_update_saddr(struct sock *sk, void *saddr, int family);
diff --git a/include/net/sock.h b/include/net/sock.h
index 51185222aac2..20ee599d293e 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2034,7 +2034,7 @@ static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb,
static inline void sk_tx_queue_set(struct sock *sk, int tx_queue)
{
- /* sk_tx_queue_mapping accept only upto a 16-bit value */
+ /* sk_tx_queue_mapping accept only up to a 16-bit value */
if (WARN_ON_ONCE((unsigned short)tx_queue >= USHRT_MAX))
return;
/* Paired with READ_ONCE() in sk_tx_queue_get() and
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 1c867a302444..543ee76dfc47 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1640,7 +1640,7 @@ struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off)
return skb;
}
/* This looks weird, but this can happen if TCP collapsing
- * splitted a fat GRO packet, while we released socket lock
+ * split a fat GRO packet, while we released socket lock
* in skb_splice_bits()
*/
tcp_eat_recv_skb(sk, skb);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 0f60a1dbf927..e1e0d71b2345 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5131,7 +5131,7 @@ void tcp_sack_compress_send_ack(struct sock *sk)
__sock_put(sk);
/* Since we have to send one ack finally,
- * substract one from tp->compressed_ack to keep
+ * subtract one from tp->compressed_ack to keep
* LINUX_MIB_TCPACKCOMPRESSED accurate.
*/
NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPACKCOMPRESSED,
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index d960e3de7d50..1079862e5b4a 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2716,7 +2716,7 @@ static int tcp_mtu_probe(struct sock *sk)
interval = icsk->icsk_mtup.search_high - icsk->icsk_mtup.search_low;
/* When misfortune happens, we are reprobing actively,
* and then reprobe timer has expired. We stick with current
- * probing process by not resetting search range to its orignal.
+ * probing process by not resetting search range to its original.
*/
if (probe_size > tcp_mtu_to_mss(sk, icsk->icsk_mtup.search_high) ||
interval < READ_ONCE(net->ipv4.sysctl_tcp_probe_threshold)) {
diff --git a/net/ipv6/calipso.c b/net/ipv6/calipso.c
index c6a34334e657..9c9817b7a4cb 100644
--- a/net/ipv6/calipso.c
+++ b/net/ipv6/calipso.c
@@ -43,7 +43,7 @@
#define CALIPSO_HDR_LEN (2 + 8)
/* Maximum size of the calipso option including
- * the two-byte TLV header and upto 3 bytes of
+ * the two-byte TLV header and up to 3 bytes of
* leading pad and 7 bytes of trailing pad.
*/
#define CALIPSO_OPT_LEN_MAX_WITH_PAD (3 + CALIPSO_OPT_LEN_MAX + 7)
@@ -712,7 +712,7 @@ static int calipso_pad_write(unsigned char *buf, unsigned int offset,
*
* Description:
* Generate a CALIPSO option using the DOI definition and security attributes
- * passed to the function. This also generates upto three bytes of leading
+ * passed to the function. This also generates up to three bytes of leading
* padding that ensures that the option is 4n + 2 aligned. It returns the
* number of bytes written (including any initial padding).
*/
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 724ecd741d4c..342902a73d1c 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -1392,7 +1392,7 @@ int llc_conn_disc(struct sock *sk, struct sk_buff *skb)
/**
* llc_conn_reset - resets connection
- * @sk : reseting connection.
+ * @sk : resetting connection.
* @skb: occurred event.
*
* Stop all timers, empty all queues and reset all flags.
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index e6b1d9758c9c..4f2be126b2f1 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2317,7 +2317,7 @@ static int netlink_dump(struct sock *sk, bool lock_taken)
*/
skb_reserve(skb, skb_tailroom(skb) - alloc_size);
- /* Make sure malicious BPF programs can not read unitialized memory
+ /* Make sure malicious BPF programs can not read uninitialized memory
* from skb->head -> skb->data
*/
skb_reset_network_header(skb);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 27c26e12f95d..25aa63bac2c3 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -411,7 +411,7 @@ static enum sctp_scope sctp_v4_scope(union sctp_addr *addr)
}
/* Returns a valid dst cache entry for the given source and destination ip
- * addresses. If an association is passed, trys to get a dst entry with a
+ * addresses. If an association is passed, tries to get a dst entry with a
* source address that matches an address in the bind address list.
*/
static void sctp_v4_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
@@ -1564,7 +1564,7 @@ static __init int sctp_init(void)
}
/* Allocate and initialize the SCTP port hash table.
- * Note that order is initalized to start at the max sized
+ * Note that order is initialized to start at the max sized
* table we want to support. If we can't get that many pages
* reduce the order and try again
*/
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 84a4c97d0f75..3dd387e10c45 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2215,7 +2215,7 @@ static enum sctp_ierror sctp_verify_param(struct net *net,
if (!ep->auth_enable)
goto unhandled;
- /* SCTP-AUTH: Secion 6.1
+ /* SCTP-AUTH: Section 6.1
* If the random number is not 32 byte long the association
* MUST be aborted. The ABORT chunk SHOULD contain the error
* cause 'Protocol Violation'.
@@ -2306,7 +2306,7 @@ int sctp_verify_init(struct net *net, const struct sctp_endpoint *ep,
}
/* There is a possibility that a parameter length was bad and
- * in that case we would have stoped walking the parameters.
+ * in that case we would have stopped walking the parameters.
* The current param.p would point at the bad one.
* Current consensus on the mailing list is to generate a PROTOCOL
* VIOLATION error. We build the ERROR chunk here and let the normal
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 0d99b7e8c082..b842dc543d63 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -566,7 +566,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_cmd_seq *commands,
* If the timer was a heartbeat, we only increment error counts
* when we already have an outstanding HEARTBEAT that has not
* been acknowledged.
- * Additionally, some tranport states inhibit error increments.
+ * Additionally, some transport states inhibit error increments.
*/
if (!is_hb) {
asoc->overall_error_count++;
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index 6ea55b9fbde4..c44e033f6ffb 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -723,7 +723,7 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport,
* transport address, the cwnd of the transport address
* should be adjusted to max(cwnd/2, 4*MTU) per RTO.
* NOTE: Although the draft recommends that this check needs
- * to be done every RTO interval, we do it every hearbeat
+ * to be done every RTO interval, we do it every heartbeat
* interval.
*/
transport->cwnd = max(transport->cwnd/2,
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index b05daafd369a..15bf4fc34c82 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -933,7 +933,7 @@ static void sctp_ulpq_reap_ordered(struct sctp_ulpq *ulpq, __u16 sid)
}
/* Skip over an SSN. This is used during the processing of
- * Forwared TSN chunk to skip over the abandoned ordered data
+ * Forwarded TSN chunk to skip over the abandoned ordered data
*/
void sctp_ulpq_skip(struct sctp_ulpq *ulpq, __u16 sid, __u16 ssn)
{
diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index f4adeed5f5f0..54e8b68d910c 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -12,7 +12,7 @@ by shell source'ing. Namely "functions.sh" and "parameters.sh".
Common parameters
-----------------
-The parameters.sh file support easy and consistant parameter parsing
+The parameters.sh file support easy and consistent parameter parsing
across the sample scripts. Usage example is printed on errors::
Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
diff --git a/tools/testing/selftests/drivers/net/team/options.sh b/tools/testing/selftests/drivers/net/team/options.sh
index 66c0cb896dad..fdfe2a2cfe10 100755
--- a/tools/testing/selftests/drivers/net/team/options.sh
+++ b/tools/testing/selftests/drivers/net/team/options.sh
@@ -139,7 +139,7 @@ team_test_option()
log_test "Set + Get '${option_name}' test"
}
-# Test that getting a non-existant option fails.
+# Test that getting a non-existent option fails.
# Globals:
# RET - Used by testing infra like `check_err`.
# EXIT_STATUS - Used by `log_test` for whole script exit value.
diff --git a/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh b/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh
index eef5cbf6eecc..042c3a1f954c 100755
--- a/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh
+++ b/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh
@@ -37,7 +37,7 @@ setup() {
# Set up interfaces veth0 and veth1, which are pairs in separate
# namespaces. veth0 is veth-router, veth1 is veth-host.
- # first, set up the inteface's link to the namespace
+ # first, set up the interface's link to the namespace
# then, set the interface "up"
ip netns exec ${ROUTER_NS} ip link add name ${ROUTER_INTF} \
type veth peer name ${HOST_INTF}
@@ -71,7 +71,7 @@ setup_v6() {
# Set up interfaces veth0 and veth1, which are pairs in separate
# namespaces. veth0 is veth-router, veth1 is veth-host.
- # first, set up the inteface's link to the namespace
+ # first, set up the interface's link to the namespace
# then, set the interface "up"
ip -n ${ROUTER_NS_V6} link add name ${ROUTER_INTF} \
type veth peer name ${HOST_INTF} netns ${HOST_NS_V6}
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 05acd4011456..ae17be3423c0 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -114,7 +114,7 @@ netif_find_driver()
done
}
-# Whether to find netdevice according to the driver speficied by the importer
+# Whether to find netdevice according to the driver specified by the importer
: "${NETIF_FIND_DRIVER:=}"
if [[ $NETIF_FIND_DRIVER ]]; then
diff --git a/tools/testing/selftests/net/ip_defrag.c b/tools/testing/selftests/net/ip_defrag.c
index f9ed749fd8c7..46630a489a03 100644
--- a/tools/testing/selftests/net/ip_defrag.c
+++ b/tools/testing/selftests/net/ip_defrag.c
@@ -30,7 +30,7 @@ const struct in6_addr addr6 = IN6ADDR_LOOPBACK_INIT;
#define IP6_HLEN (sizeof(struct ip6_hdr))
#define UDP_HLEN (sizeof(struct udphdr))
-/* IPv6 fragment header lenth. */
+/* IPv6 fragment header length. */
#define FRAG_HLEN 8
static int payload_len;
next prev parent reply other threads:[~2026-09-07 4:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 4:46 [PATCH v2 0/6] net: fix typos and repeated words " Hemanth Selam
2026-09-07 4:46 ` Hemanth Selam [this message]
2026-09-07 12:49 ` [PATCH v2 1/6] net: fix typos " Jijie Shao
2026-09-07 12:52 ` Andrew Lunn
2026-09-07 15:37 ` Edward Cree
2026-09-07 4:46 ` [PATCH v2 2/6] net: broadcom: fix repeated word 'will' in comment Hemanth Selam
2026-09-07 4:46 ` [PATCH v2 3/6] net: llc: fix repeated word 'all' " Hemanth Selam
2026-09-07 12:46 ` Andrew Lunn
2026-09-07 4:46 ` [PATCH v2 4/6] net: sfc: fix repeated word 'the' " Hemanth Selam
2026-09-07 12:46 ` Andrew Lunn
2026-09-07 15:38 ` Edward Cree
2026-09-07 4:46 ` [PATCH v2 5/6] selftests: net: fix repeated word 'use' " Hemanth Selam
2026-09-07 12:47 ` Andrew Lunn
2026-09-07 4:46 ` [PATCH v2 6/6] net: usb: fix repeated words in log messages Hemanth Selam
2026-09-07 12:49 ` Andrew Lunn
2026-09-08 5:25 ` Hemanth Selam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260907044635.7141-2-hemanth.selam@gmail.com \
--to=hemanth.selam@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-net-drivers@amd.com \
--cc=linux-usb@vger.kernel.org \
--cc=manishc@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
--cc=skalluru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®