* [PATCH] drm/bridge: dw-hdmi-qp: Guard clear_audio_infoframe when PHY is down
@ 2026-09-08 6:27 Frank Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Frank Zhang @ 2026-09-08 6:27 UTC (permalink / raw)
To: royalnet026, Laurent.pinchart, airlied, andrzej.hajda,
luca.ceresoli, cristian.ciocaltea, daniels, detlev.casanova,
dmitry.baryshkov, heiko, jernej.skrabec, jonas,
maarten.lankhorst, mripard, neil.armstrong, rfoss, simona,
tzimmermann, sebastian.reichel, macromorgan
Cc: dri-devel, stable, linux-kernel
The following panic was observed during system reboot:
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 6 UID: 1000 PID: 2348 Comm: pipewire ... 7.0.5+ #4 PREEMPT(full)
Call trace:
...
regmap_update_bits_base+0x70/0xa8
dw_hdmi_qp_bridge_clear_audio_infoframe+0x3c/0x58 [dw_hdmi_qp]
drm_bridge_connector_clear_audio_infoframe+0x2c/0x48 [drm_display_helper]
...
dw_hdmi_qp_audio_disable+0x28/0xa8 [dw_hdmi_qp]
drm_bridge_connector_audio_shutdown+0x38/0x68 [drm_display_helper]
drm_connector_hdmi_audio_shutdown+0x28/0x40 [drm_display_helper]
hdmi_codec_shutdown+0x60/0x90 [snd_soc_hdmi_codec]
...
snd_pcm_release_substream+0xcc/0x120 [snd_pcm]
snd_pcm_release+0x4c/0xc0 [snd_pcm]
...
The root cause is pipewire tries to close the HDMI audio device after
atomic_disable(), which sets tmds_char_rate to 0 and disables the PHY.
In this case, dw_hdmi_qp_audio_disable() will call
dw_hdmi_qp_bridge_clear_audio_infoframe(), accessing register without
checking tmds_char_rate.
Guard the register access in drm_display_helper callback function with
tmds_char_rate check.
Fixes: fd0141d1a8a2 ("drm/bridge: synopsys: Add audio support for dw-hdmi-qp")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Zhang <rmxpzlb@gmail.com>
---
Changes in v2:
- Move drm_atomic_helper_connector_hdmi_clear_audio_infoframe() inside
the if (hdmi->tmds_char_rate) of dw_hdmi_qp_audio_disable().
- Link to v1: https://lore.kernel.org/all/20260416093150.13853-1-rmxpzlb@gmail.com/
Changes in v3:
- Add a tmds_char_rate guard in clear_audio_infoframe path.
- Decouple write_audio_infoframe from clear_audio_infoframe.
- Balance the PKTSCHED_AMD_TX_EN bit enable/disable.
- Link to v2: https://lore.kernel.org/all/20260418101936.7731-1-rmxpzlb@gmail.com/
Changes in v4:
- Update panic stack on 7.0.5
- Link to v3: https://lore.kernel.org/all/20260423081514.15444-1-rmxpzlb@gmail.com/
Changes in v5:
- Reuse the origin dw_hdmi_qp_bridge_clear_audio_infoframe and add
tmds_char_rate guard in new callback function.
- Link to v4: https://lore.kernel.org/all/20260512103153.8861-1-rmxpzlb@gmail.com/
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
index 1c214a8e6dc2..8729783d4eb6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
@@ -880,7 +880,7 @@ static int dw_hdmi_qp_bridge_clear_spd_infoframe(struct drm_bridge *bridge)
return 0;
}
-static int dw_hdmi_qp_bridge_clear_audio_infoframe(struct drm_bridge *bridge)
+static int __dw_hdmi_qp_bridge_clear_audio_infoframe(struct drm_bridge *bridge)
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
@@ -893,6 +893,16 @@ static int dw_hdmi_qp_bridge_clear_audio_infoframe(struct drm_bridge *bridge)
return 0;
}
+static int dw_hdmi_qp_bridge_clear_audio_infoframe(struct drm_bridge *bridge)
+{
+ struct dw_hdmi_qp *hdmi = bridge->driver_private;
+
+ if (hdmi->tmds_char_rate > 0)
+ return __dw_hdmi_qp_bridge_clear_audio_infoframe(bridge);
+
+ return 0;
+}
+
static void dw_hdmi_qp_write_pkt(struct dw_hdmi_qp *hdmi, const u8 *buffer,
size_t start, size_t len, unsigned int reg)
{
@@ -987,7 +997,7 @@ static int dw_hdmi_qp_bridge_write_audio_infoframe(struct drm_bridge *bridge,
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
- dw_hdmi_qp_bridge_clear_audio_infoframe(bridge);
+ __dw_hdmi_qp_bridge_clear_audio_infoframe(bridge);
/*
* AUDI_CONTENTS0: { RSV, HB2, HB1, RSV }
--
2.55.0
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] drm/bridge: dw-hdmi-qp: Guard clear_audio_infoframe when PHY is down
@ 2026-04-16 9:31 Frank Zhang
2026-04-17 16:46 ` Detlev Casanova
0 siblings, 1 reply; 3+ messages in thread
From: Frank Zhang @ 2026-04-16 9:31 UTC (permalink / raw)
To: andrzej.hajda, neil.armstrong, rfoss, maarten.lankhorst, mripard,
tzimmermann, airlied, simona
Cc: Laurent.pinchart, jonas, jernej.skrabec, dri-devel, linux-kernel
The following panic was observed during system reboot:
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 7 UID: 1000 PID: 2637 Comm: pipewire ... 6.19.10-300.fc44.aarch64
Call trace:
...
regmap_update_bits_base+0x5c/0x90
dw_hdmi_qp_bridge_clear_infoframe+0xb0/0x120 [dw_hdmi_qp]
drm_bridge_connector_clear_infoframe+0x28/0x48 [drm_display_helper]
...
dw_hdmi_qp_audio_disable+0x24/0xb8 [dw_hdmi_qp]
drm_bridge_connector_audio_shutdown+0x30/0x60 [drm_display_helper]
drm_connector_hdmi_audio_shutdown+0x24/0x38 [drm_display_helper]
hdmi_codec_shutdown+0x60/0x90 [snd_soc_hdmi_codec]
...
snd_pcm_release_substream.part.0+0x44/0xd8 [snd_pcm]
snd_pcm_release+0x60/0xe8 [snd_pcm]
...
The root cause is pipewire tries to close the HDMI audio device after
atomic_disable(), which sets tmds_char_rate to 0 and disable the PHY.
In this case, dw_hdmi_qp_audio_disable() will call
clear_audio_infoframe(), accessing registers without checking
tmds_char_rate.
Add a tmds_char_rate check in dw_hdmi_qp_bridge_clear_audio_infoframe()
to skip the register write when the PHY is inactive.
Signed-off-by: Frank Zhang <rmxpzlb@gmail.com>
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
index d649a1cf07f5..f963dff81dc6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
@@ -886,11 +886,12 @@ static int dw_hdmi_qp_bridge_clear_audio_infoframe(struct drm_bridge *bridge)
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
- dw_hdmi_qp_mod(hdmi, 0,
- PKTSCHED_ACR_TX_EN |
- PKTSCHED_AUDS_TX_EN |
- PKTSCHED_AUDI_TX_EN,
- PKTSCHED_PKT_EN);
+ if (hdmi->tmds_char_rate)
+ dw_hdmi_qp_mod(hdmi, 0,
+ PKTSCHED_ACR_TX_EN |
+ PKTSCHED_AUDS_TX_EN |
+ PKTSCHED_AUDI_TX_EN,
+ PKTSCHED_PKT_EN);
return 0;
}
--
2.53.0
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] drm/bridge: dw-hdmi-qp: Guard clear_audio_infoframe when PHY is down
2026-04-16 9:31 Frank Zhang
@ 2026-04-17 16:46 ` Detlev Casanova
0 siblings, 0 replies; 3+ messages in thread
From: Detlev Casanova @ 2026-04-17 16:46 UTC (permalink / raw)
To: Frank Zhang, andrzej.hajda, neil.armstrong, rfoss,
maarten.lankhorst, mripard, tzimmermann, airlied, simona,
Cristian Ciocaltea
Cc: Laurent.pinchart, jonas, jernej.skrabec, dri-devel, linux-kernel
Hi Frank,
Please add me to CC if you send a v2.
On 4/16/26 05:31, Frank Zhang wrote:
> The following panic was observed during system reboot:
>
> Kernel panic - not syncing: Asynchronous SError Interrupt
> CPU: 7 UID: 1000 PID: 2637 Comm: pipewire ... 6.19.10-300.fc44.aarch64
> Call trace:
> ...
> regmap_update_bits_base+0x5c/0x90
> dw_hdmi_qp_bridge_clear_infoframe+0xb0/0x120 [dw_hdmi_qp]
> drm_bridge_connector_clear_infoframe+0x28/0x48 [drm_display_helper]
> ...
> dw_hdmi_qp_audio_disable+0x24/0xb8 [dw_hdmi_qp]
> drm_bridge_connector_audio_shutdown+0x30/0x60 [drm_display_helper]
> drm_connector_hdmi_audio_shutdown+0x24/0x38 [drm_display_helper]
> hdmi_codec_shutdown+0x60/0x90 [snd_soc_hdmi_codec]
> ...
> snd_pcm_release_substream.part.0+0x44/0xd8 [snd_pcm]
> snd_pcm_release+0x60/0xe8 [snd_pcm]
> ...
>
> The root cause is pipewire tries to close the HDMI audio device after
> atomic_disable(), which sets tmds_char_rate to 0 and disable the PHY.
>
> In this case, dw_hdmi_qp_audio_disable() will call
> clear_audio_infoframe(), accessing registers without checking
> tmds_char_rate.
>
> Add a tmds_char_rate check in dw_hdmi_qp_bridge_clear_audio_infoframe()
> to skip the register write when the PHY is inactive.
>
> Signed-off-by: Frank Zhang <rmxpzlb@gmail.com>
Add a "Fixes:" tag so this gets backported were needed.
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
> index d649a1cf07f5..f963dff81dc6 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
> @@ -886,11 +886,12 @@ static int dw_hdmi_qp_bridge_clear_audio_infoframe(struct drm_bridge *bridge)
> {
> struct dw_hdmi_qp *hdmi = bridge->driver_private;
>
> - dw_hdmi_qp_mod(hdmi, 0,
> - PKTSCHED_ACR_TX_EN |
> - PKTSCHED_AUDS_TX_EN |
> - PKTSCHED_AUDI_TX_EN,
> - PKTSCHED_PKT_EN);
> + if (hdmi->tmds_char_rate)
I'd rather move the call to
drm_atomic_helper_connector_hdmi_clear_audio_infoframe() inside the if
(hdmi->tmds_char_rate) of dw_hdmi_qp_audio_disable().
There is no need to check for tmds_char_rate in every
dw_hdmi_qp_bridge_clear_audio_infoframe() call.
> + dw_hdmi_qp_mod(hdmi, 0,
> + PKTSCHED_ACR_TX_EN |
> + PKTSCHED_AUDS_TX_EN |
> + PKTSCHED_AUDI_TX_EN,
> + PKTSCHED_PKT_EN);
>
> return 0;
> }
Regards,
Detlev.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-09-08 6:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-08 6:27 [PATCH] drm/bridge: dw-hdmi-qp: Guard clear_audio_infoframe when PHY is down Frank Zhang
-- strict thread matches above, loose matches on Subject: below --
2026-04-16 9:31 Frank Zhang
2026-04-17 16:46 ` Detlev Casanova
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®