[PATCH 3/3] hwmon: (nct6775) Add support for NCT6122D

[Paul Louvel <paul.louvel@bootlin.com>]

The NCT6122D hardware monitor is the same as the NCT6126D, the only
difference if the number of UARTs: two instead of six.
Add it to the driver using the nct6126 chip kind to avoid code
duplication.

Assisted-by: opencode:z-ai/glm-5.3-flash
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
---
 drivers/hwmon/nct6775-platform.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
index a8ef58d3a883..d359c28f3e0f 100644
--- a/drivers/hwmon/nct6775-platform.c
+++ b/drivers/hwmon/nct6775-platform.c
@@ -25,7 +25,7 @@ enum sensor_access { access_direct, access_asuswmi };
 static const char * const nct6775_sio_names[] __initconst = {
 	[nct6106] = "NCT6106D",
 	[nct6116] = "NCT6116D",
-	[nct6126] = "NCT6126D",
+	[nct6126] = "NCT6122D/NCT6126D",
 	[nct6775] = "NCT6775F",
 	[nct6776] = "NCT6776D/F",
 	[nct6779] = "NCT6779D",
@@ -77,6 +77,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 
 #define SIO_NCT6106_ID		0xc450
 #define SIO_NCT6116_ID		0xd280
+#define SIO_NCT6122_ID		0xd2a0
 #define SIO_NCT6126_A_ID	0xd283
 #define SIO_NCT6126_B_ID	0xd284
 #define SIO_NCT6775_ID		0xb470
@@ -1035,6 +1036,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 		else
 			sio_data->kind = nct6116;
 		break;
+	case SIO_NCT6122_ID:
+		sio_data->kind = nct6126;
+		break;
 	case SIO_NCT6775_ID:
 		sio_data->kind = nct6775;
 		break;

-- 
2.55.0