Re: [PATCH 2/3] hwmon: (nct6775) Add support for NCT6126D

["Paul Louvel" <paul.louvel@bootlin.com>]

On Wed Sep 9, 2026 at 10:28 PM CEST, Guenter Roeck wrote:
> On Wed, Sep 09, 2026 at 08:25:55PM +0200, Paul Louvel wrote:
>> Add support for the hardware monitoring functionality of the NCT6126D
>> Super-I/O chip.
>> 
>> The NCT6126D hardware monitor is nearly identical to the NCT6116D: the
>> fan, PWM, temperature, TSI, alarm.
>> 
>> The differences are:
>> 
>> - Device IDs 0xd283 (A version) and 0xd284 (B version), which both fall
>>   into the NCT6116D ID range (0xd280) when masked with SIO_ID_MASK.
>>   Instead, compare the full value to distinguish from NCT6116D.
>> 
>> - One additional VIN: VHIF scaled at 16 mV/LSB.
>> 
>> - The fan count limit registers are documented for all five fans.
>>   Also expose fan4_min.
>> 
>> Assisted-by: opencode:z-ai/glm-5.3-flash
>> Signed-Off: Paul Louvel <paul.louvel@bootlin.com>
>
> Signed-off-by:
>
> I can not change that, so you'll have to resend.
>
> Thanks,
> Guenter

Whoops, sorry.
I guess manually adding this trailer is not a very good idea..

Thanks,
-- 
Paul Louvel, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com