Re: [PATCH v4 1/4] dt-bindings: timer: Add the Renesas RZ/N1 timer

[Herve Codina <herve.codina@bootlin.com>]

Hi Geert, Wolfram,

On Wed, 5 Aug 2026 09:46:41 +0200
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Wolfram,
> 
> On Tue, 4 Aug 2026 at 22:06, Wolfram Sang
> <wsa+renesas@sang-engineering.com> wrote:
> > On Tue, Jul 21, 2026 at 10:29:47AM +0200, Herve Codina (Schneider Electric) wrote:  
> > > The Renesas RZ/N1 timer block controller is the controller in charge of
> > > timers available in the Renesas RZ/N1 SoCs family.
> > >
> > > This controller handles 8 timers:
> > >  - 6 16-bit timers
> > >  - 2 32-bit timers
> > >
> > > Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>  
> >
> > In general:
> >
> > Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> >
> > One nit:
> >  
> > > +        reg = <0x51001000 0x400>;  
> >
> > Isn't 0x400 a bit excessive? The last documented register in my docs is
> > 0x114, so maybe 0x200 will do above?  
> 
> FTR, 0x200 or 0x400 does not make much of a difference, as this is
> mapped in PAGE_SIZE units anyway.
> 
> According to Table 2.1 ("Register Map") in the RZ/N1 Introduction
> document it could even be 0x1000...
> 

In order to be consistent with register listing available in the docs,
I plan to reduce the size to 0x200 in the next iteration.

Let me know if you disagree with that.

Best regards,
Hervé