From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, konrad.dybcio@oss.qualcomm.com,
mani@kernel.org
Subject: [PATCH 09/34] arm64: dts: qcom: sm8550: Fix PCIe wake GPIO polarity
Date: Thu, 10 Sep 2026 18:58:58 +0530 [thread overview]
Message-ID: <20260910-root_port-v1-9-90a252ddbbfa@oss.qualcomm.com> (raw)
In-Reply-To: <20260910-root_port-v1-0-90a252ddbbfa@oss.qualcomm.com>
The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts | 4 ++--
arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 4 ++--
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 4 ++--
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 2 +-
7 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index ae301d78e071..aaf5eb57ce23 100644
--- a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -336,7 +336,7 @@ &mdss_dsi0_phy {
&pcie0 {
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
@@ -349,7 +349,7 @@ &pcie0_phy {
&pcie1 {
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_default_state>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts
index 9df8dcd6c62b..41b09ab43d0c 100644
--- a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts
@@ -1045,7 +1045,7 @@ &mdss_dp0 {
&pcie0 {
vddpe-3v3-supply = <&pcie_upd_3p3>;
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
@@ -1146,7 +1146,7 @@ pci@0,1 {
};
&pcie1 {
- wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_default_state>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 82fb10ed6b6b..4777c908c4d7 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -1087,7 +1087,7 @@ &mdss_dp0 {
};
&pcie0 {
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
@@ -1121,7 +1121,7 @@ &pcie0_phy {
};
&pcie1 {
- wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_default_state>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 7c634572c6b7..eb1de33e5ba5 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -739,7 +739,7 @@ &mdss_dp0 {
};
&pcie0 {
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -756,7 +756,7 @@ &pcie0_phy {
};
&pcie1 {
- wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 473ec4e27daf..13cdb5b0ce40 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -987,7 +987,7 @@ &mdss_dp0 {
};
&pcie0 {
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index 81c02ee27fe9..cf4e4e9d9e26 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -510,7 +510,7 @@ &i2c_master_hub_0 {
};
&pcie0 {
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index 367f6eae5e65..9f347bea6c74 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -584,7 +584,7 @@ cirrus,gpio-ctrl2 {
};
&pcie0 {
- wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
--
2.34.1
next prev parent reply other threads:[~2026-09-10 13:29 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 13:28 [PATCH 00/34] arm64: dts: qcom: Move PCIe phy/GPIOs to root port nodes and fix wake-gpios polarity Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 01/34] ARM: dts: qcom: sdx55: Fix PCIe wake GPIO polarity Krishna Chaitanya Chundru
2026-09-11 4:58 ` Manivannan Sadhasivam
2026-09-10 13:28 ` [PATCH 02/34] arm64: dts: qcom: msm8996: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 03/34] arm64: dts: qcom: sdm845: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 04/34] arm64: dts: qcom: sc8180x: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 05/34] arm64: dts: qcom: sm8150: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 06/34] arm64: dts: qcom: sm8250: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 07/34] arm64: dts: qcom: sm8350: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` [PATCH 08/34] arm64: dts: qcom: sm8450: " Krishna Chaitanya Chundru
2026-09-10 13:28 ` Krishna Chaitanya Chundru [this message]
2026-09-10 13:28 ` [PATCH 10/34] arm64: dts: qcom: qcs8550-rb5gen2: Move PCIe phy and GPIOs to root port node Krishna Chaitanya Chundru
2026-09-14 11:00 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 11/34] arm64: dts: qcom: sm8650: Fix PCIe wake GPIO polarity Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 12/34] arm64: dts: qcom: sm8750: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 13/34] arm64: dts: qcom: kaanapali: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 14/34] arm64: dts: qcom: sar2130p: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 15/34] arm64: dts: qcom: monaco: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 16/34] arm64: dts: qcom: lemans: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 17/34] arm64: dts: qcom: talos: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 18/34] arm64: dts: qcom: sa8540p-ride: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 19/34] arm64: dts: qcom: kodiak: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 20/34] arm64: dts: qcom: qcs6490-vicharak-axon-mini: Move PCIe phy and GPIOs to root port node Krishna Chaitanya Chundru
2026-09-14 11:00 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 21/34] arm64: dts: qcom: msm8998: " Krishna Chaitanya Chundru
2026-09-14 11:01 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 22/34] arm64: dts: qcom: qcs404: " Krishna Chaitanya Chundru
2026-09-14 11:01 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 23/34] arm64: dts: qcom: sar2130p: " Krishna Chaitanya Chundru
2026-09-14 11:01 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 24/34] arm64: dts: qcom: sc8180x: " Krishna Chaitanya Chundru
2026-09-14 11:02 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 25/34] arm64: dts: qcom: sdm845: " Krishna Chaitanya Chundru
2026-09-14 11:03 ` Konrad Dybcio
2026-09-10 13:29 ` [PATCH 26/34] arm64: dts: qcom: sm8150: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 27/34] arm64: dts: qcom: sm8250: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 28/34] arm64: dts: qcom: sm8350: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 29/34] arm64: dts: qcom: sm8450: " Krishna Chaitanya Chundru
2026-09-10 13:37 ` Neil Armstrong
2026-09-10 13:29 ` [PATCH 30/34] arm64: dts: qcom: talos: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 31/34] arm64: dts: qcom: sm8650: " Krishna Chaitanya Chundru
2026-09-10 13:36 ` Neil Armstrong
2026-09-10 13:29 ` [PATCH 32/34] arm64: dts: qcom: msm8996: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 33/34] arm64: dts: qcom: lemans: " Krishna Chaitanya Chundru
2026-09-10 13:29 ` [PATCH 34/34] arm64: dts: qcom: sm8550: " Krishna Chaitanya Chundru
2026-09-10 13:37 ` Neil Armstrong
2026-09-11 4:56 ` [PATCH 00/34] arm64: dts: qcom: Move PCIe phy/GPIOs to root port nodes and fix wake-gpios polarity Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910-root_port-v1-9-90a252ddbbfa@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®