mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shehryar Ahmad <shehryar.amd@gmail.com>
To: jic23@kernel.org
Cc: nuno.sa@analog.com, Michael.Hennerich@analog.com,
	dlechner@baylibre.com, andy@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org,
	gregkh@linuxfoundation.org, linux@analog.com,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-staging@lists.linux.dev, devicetree@vger.kernel.org,
	Shehryar Ahmad <shehryar.amd@gmail.com>
Subject: [PATCH v2 4/6] iio: accel: adis16201: add ADIS16203 support
Date: Sun, 13 Sep 2026 13:53:05 +0500	[thread overview]
Message-ID: <20260913085307.13846-5-shehryar.amd@gmail.com> (raw)
In-Reply-To: <20260913085307.13846-1-shehryar.amd@gmail.com>

Add ADIS16203 from staging to mainline ADIS16201. ADIS16203 shares same
SPI protocol and register addresses. Differing parameters are handled by
adis16201_chip_info structure.

ADIS16203 specific support includes DIAG_STAT_SELFTEST_FAIL_BIT, which
is supported only on ADIS16203, and a separate channel array.

Kconfig is updated accordingly.

Signed-off-by: Shehryar Ahmad <shehryar.amd@gmail.com>
---
 drivers/iio/accel/Kconfig     |  6 +++---
 drivers/iio/accel/adis16201.c | 32 ++++++++++++++++++++++++++++++--
 2 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 4094299e2..f884ec66f 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -7,13 +7,13 @@
 menu "Accelerometers"
 
 config ADIS16201
-	tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
+	tristate "ADIS16201 Digital Inclinometer and similar"
 	depends on SPI
 	select IIO_ADIS_LIB
 	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
 	help
-	  Say Y here to build support for Analog Devices adis16201 dual-axis
-	  digital inclinometer and accelerometer.
+	  Say Y here to build support for Analog Devices adis16201 Digital
+	  Inclinometer and similar
 
 	  To compile this driver as a module, say M here: the module will
 	  be called adis16201.
diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
index e0bf7df50..8e8e612fd 100644
--- a/drivers/iio/accel/adis16201.c
+++ b/drivers/iio/accel/adis16201.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer
+ * ADIS16201 Digital Inclinometer and similar
  *
  * Copyright 2010 Analog Devices Inc.
  */
@@ -63,6 +63,7 @@
 #define ADIS16201_DIAG_STAT_REG				0x3C
 #define  ADIS16201_DIAG_STAT_ALARM2			BIT(9)
 #define  ADIS16201_DIAG_STAT_ALARM1			BIT(8)
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT		5	/* ADIS16203 only */
 #define  ADIS16201_DIAG_STAT_SPI_FAIL_BIT		3
 #define  ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT		2
 /* Power supply above 3.625 V */
@@ -232,6 +233,15 @@ static const struct iio_chan_spec adis16201_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(7)
 };
 
+static const struct iio_chan_spec adis16203_channels[] = {
+	ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT_REG, ADIS16201_SCAN_SUPPLY, 0, 12),
+	ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT_REG, ADIS16201_SCAN_TEMP, 0, 12),
+	ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
+	ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
+			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+	IIO_CHAN_SOFT_TIMESTAMP(7),
+};
+
 static const struct adis16201_chip_info adis16201_chip_data = {
 	.arr_channels = adis16201_channels,
 	.incli_scale_val2 = 100000,
@@ -246,6 +256,21 @@ static const struct adis16201_chip_info adis16201_chip_data = {
 	.name = "adis16201",
 };
 
+static const struct adis16201_chip_info adis16203_chip_data = {
+	.arr_channels = adis16203_channels,
+	.incli_scale_val2 = 25000,
+	.write_mask_incli = GENMASK(13, 0),
+	.diag_stat_mask =
+		BIT(ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT) |
+		BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) |
+		BIT(ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT) |
+		BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) |
+		BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT),
+	.read_bits_incli = 14,
+	.num_channels = ARRAY_SIZE(adis16203_channels),
+	.name = "adis16203",
+};
+
 static const struct iio_info adis16201_info = {
 	.read_raw = adis16201_read_raw,
 	.write_raw = adis16201_write_raw,
@@ -253,6 +278,7 @@ static const struct iio_info adis16201_info = {
 };
 
 static const char * const adis16201_status_error_msgs[] = {
+	[ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
 	[ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
 	[ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
 	[ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
@@ -322,6 +348,7 @@ static int adis16201_probe(struct spi_device *spi)
 
 static const struct of_device_id adis16201_of_match[] = {
 	{ .compatible = "adi,adis16201", .data = &adis16201_chip_data },
+	{ .compatible = "adi,adis16203", .data = &adis16203_chip_data },
 	{ },
 };
 
@@ -329,6 +356,7 @@ MODULE_DEVICE_TABLE(of, adis16201_of_match);
 
 static const struct spi_device_id adis16201_ids[] = {
 	{ .name = "adis16201", .driver_data = (kernel_ulong_t)&adis16201_chip_data },
+	{ .name = "adis16203", .driver_data = (kernel_ulong_t)&adis16203_chip_data },
 	{ },
 };
 
@@ -345,6 +373,6 @@ static struct spi_driver adis16201_driver = {
 module_spi_driver(adis16201_driver);
 
 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
-MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
+MODULE_DESCRIPTION("Analog Devices ADIS16201 Inclinometer and similar");
 MODULE_LICENSE("GPL v2");
 MODULE_IMPORT_NS("IIO_ADISLIB");
-- 
2.43.0


  parent reply	other threads:[~2026-09-13  8:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-13  8:53 [PATCH v2 0/6] iio: accel: merge adis16203 into mainline adis16201 and remove from staging Shehryar Ahmad
2026-09-13  8:53 ` [PATCH v2 1/6] iio: accel: adis16201: add SPI device ID table Shehryar Ahmad
2026-09-13  8:53 ` [PATCH v2 2/6] iio: accel: adis16201: add OF " Shehryar Ahmad
2026-09-13  8:53 ` [PATCH v2 3/6] iio: accel: adis16201: prepare driver to support additional parts Shehryar Ahmad
2026-09-13  8:53 ` Shehryar Ahmad [this message]
2026-09-13  8:53 ` [PATCH v2 5/6] staging: iio: accel: remove adis16203, merged into mainline adis16201 driver Shehryar Ahmad
2026-09-13  8:53 ` [PATCH v2 6/6] dt-bindings: iio: accel: adi,adis16201: add adis16203 compatible Shehryar Ahmad

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260913085307.13846-5-shehryar.amd@gmail.com \
    --to=shehryar.amd@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=linux@analog.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®