mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2] arm64: dts: qcom: glymur-lenovo-yoga-slim7x: add the camera privacy switch The laptop has a camera privacy switch on the side of the top case - a slider, not a mechanical cover over the lens, and it does nothing to the camera itself. TLMM gpio99 follows its position: high with the switch open, low with it engaged. Describe it as a gpio-keys switch so userspace can act on it.
@ 2026-09-14  9:28 Oleg Keri
  0 siblings, 0 replies; only message in thread
From: Oleg Keri @ 2026-09-14  9:28 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel

SW_CAMERA_LENS_COVER is the only switch code the input layer has for a
camera privacy state, and it is what the Lenovo WMI camera driver and
Dell's privacy driver report for the same kind of electronic switch on
x86 machines, so use it here as well despite the name.

The embedded controller also raises event 0x29 whenever the switch
moves, which makes it tempting to report it from the EC driver instead.
That would be the wrong layer: the pin is a plain level that tracks the
slider position and needs no EC transaction to read, and the EC event
carries nothing the pin does not already say.

Signed-off-by: Oleg Keri <okerixx@gmail.com>
---
Changes in v2:
- Capitalize the switch label (Konrad).
- Put the pin state where the GPIO index sorts it, between gpio94 and
  gpio111, instead of after the trackpad state (Konrad).
- Link to v1: https://lore.kernel.org/all/20260914081652.5935-1-okerixx@gmail.com/

 .../boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts   | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
index ecc8c34fb983..769f195c99d9 100644
--- a/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts
@@ -51,7 +51,7 @@ sleep_clk: sleep-clk {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-0 = <&hall_int_n_default>, <&cam_privacy_default>;
 		pinctrl-names = "default";
 
 		switch-lid {
@@ -62,6 +62,13 @@ switch-lid {
 			wakeup-source;
 			wakeup-event-action = <EV_ACT_DEASSERTED>;
 		};
+
+		switch-camera-privacy {
+			label = "Camera privacy switch";
+			gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_CAMERA_LENS_COVER>;
+		};
 	};
 
 	leds {
@@ -1012,6 +1019,12 @@ wcn_sw_en: wcn-sw-en-state {
 		bias-disable;
 	};
 
+	cam_privacy_default: cam-privacy-default-state {
+		pins = "gpio99";
+		function = "gpio";
+		bias-pull-up;
+	};
+
 	cam_indicator_en: cam-indicator-en-state {
 		pins = "gpio111";
 		function = "gpio";
-- 
2.55.0

base-commit: 68142f986ff04b2b70b31db00f719bf690f64a9a

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-09-14  9:28 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-14  9:28 [PATCH v2] arm64: dts: qcom: glymur-lenovo-yoga-slim7x: add the camera privacy switch The laptop has a camera privacy switch on the side of the top case - a slider, not a mechanical cover over the lens, and it does nothing to the camera itself. TLMM gpio99 follows its position: high with the switch open, low with it engaged. Describe it as a gpio-keys switch so userspace can act on it Oleg Keri

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®