* [PATCH 1/2] MIPS: Octeon: size the swiotlb for a modular OHCI platform driver
@ 2026-09-15 8:18 Orgad Shaneh
2026-09-15 8:18 ` [PATCH 2/2] MIPS: Octeon: offer the RedBoot parser when it is modular Orgad Shaneh
0 siblings, 1 reply; 2+ messages in thread
From: Orgad Shaneh @ 2026-09-15 8:18 UTC (permalink / raw)
To: tsbogend; +Cc: linux-mips, linux-kernel
plat_swiotlb_setup() raises the swiotlb to 64 MB on OCTEON II with
memory above 4 GB, because that OHCI can only DMA to 32 bits. The test
is "#ifdef CONFIG_USB_OHCI_HCD_PLATFORM", which is false when the driver
is a module - the usual way to build it - so the bump is silently
skipped.
What is left depends on the rest of the function: with PCI enabled the
"memory past the BAR1 hole" branch happens to ask for the same 64 MB,
but with CONFIG_PCI off - which is normal on these SoCs when no PCI
devices are wired - swiotlbsize stays at the PAGE_SIZE it was
initialised to. A full- or low-speed device on an OCTEON II board with
more than 4 GB of RAM then has no bounce buffer to speak of.
Use IS_ENABLED() so a modular OHCI gets the same sizing as a built-in
one. Seen on a CN6635 board with 8 GB of RAM and
CONFIG_USB_OHCI_HCD_PLATFORM=m.
Fixes: a8667d706dfa ("MIPS: OCTEON: dma-octeon: fix OHCI USB config check")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
---
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -228,7 +228,7 @@ void __init plat_swiotlb_setup(void)
swiotlbsize = 64 * (1<<20);
}
#endif
-#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD_PLATFORM)
/* OCTEON II ohci is only 32-bit. */
if (OCTEON_IS_OCTEON2() && max_addr >= 0x100000000ul)
swiotlbsize = 64 * (1<<20);
--
2.47.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 2/2] MIPS: Octeon: offer the RedBoot parser when it is modular
2026-09-15 8:18 [PATCH 1/2] MIPS: Octeon: size the swiotlb for a modular OHCI platform driver Orgad Shaneh
@ 2026-09-15 8:18 ` Orgad Shaneh
0 siblings, 0 replies; 2+ messages in thread
From: Orgad Shaneh @ 2026-09-15 8:18 UTC (permalink / raw)
To: tsbogend; +Cc: linux-mips, linux-kernel
The bootbus flash driver lists "RedBoot" among the partition parsers to
try under "#ifdef CONFIG_MTD_REDBOOT_PARTS", so building that parser as
a module drops it from the list and the partitions on such a chip are
never found.
Use IS_ENABLED(), like the USB device-tree fixups in octeon-platform.c.
Untested - I have no board with RedBoot partitions; the change is by
inspection, in the same family as the two above.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
---
diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c
--- a/arch/mips/cavium-octeon/flash_setup.c
+++ b/arch/mips/cavium-octeon/flash_setup.c
@@ -22,7 +22,7 @@ static struct map_info flash_map;
static struct mtd_info *mymtd;
static const char *part_probe_types[] = {
"cmdlinepart",
-#ifdef CONFIG_MTD_REDBOOT_PARTS
+#if IS_ENABLED(CONFIG_MTD_REDBOOT_PARTS)
"RedBoot",
#endif
NULL
--
2.47.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-09-15 8:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-15 8:18 [PATCH 1/2] MIPS: Octeon: size the swiotlb for a modular OHCI platform driver Orgad Shaneh
2026-09-15 8:18 ` [PATCH 2/2] MIPS: Octeon: offer the RedBoot parser when it is modular Orgad Shaneh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®