Re: [PATCH v3 2/2] drm/tiny: add support for PIXPAPER 4.26 monochrome e-ink panel

[LiangCheng Wang <zaq14760@gmail.com>]

Hi Devarsh,

Good to hear from you, and thank you for picking the fixes up.

> Kindly let me know if we are aligned on this.

That all sounds good to me, and I am glad it is moving again.  I will test
v2 on the PIXPAPER 4.26m as soon as it is out and send a Tested-by.

There is one thing worth settling before you post.  Back in July [1] you
wrote:

  Certainly. I'll exclude the pixpaper-426m support patches from my V2
  submission so you can handle the review and validation on your end.

That is still what I would prefer: the 4.26m is the only SSD16xx hardware
I have, and its binding is already acked, so I am in a good position to
validate the panel and to look after it afterwards.  Unless you would
rather it went differently, I will send the panel entry and its binding on
top of your v2 once it is out.

Please reshape the three fixes however v2 needs - they were written
against your staging branch and the driver has moved on since.  Two small
requests from my reply at the time [2]:

  Please keep them as separate commits if you can - git am preserves
  authorship; if you fold the first one in, a Co-developed-by with my
  Signed-off-by would be appreciated.

  I maintain the existing PIXPAPER MAINTAINERS entry - would you mind
  adding me as R: on the SSD16xx one, so I stay on CC and can retest?

[1] https://lore.kernel.org/all/8fcfab0f-6b98-478b-be4a-c5b810fb3524@ti.com/
[2] https://lore.kernel.org/all/20260731035705.3198816-1-zaq14760@gmail.com/

Regards,
LiangCheng