From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: nsaenz@amazon.com, vkuznets@redhat.com,
snambakam@linux.microsoft.com, stable@vger.kernel.org
Subject: [PATCH 01/31] KVM: x86/hyperv: do not overwrite hc->ingpa for slow SIGNAL_EVENT hypercall
Date: Fri, 18 Sep 2026 09:50:00 -0400 [thread overview]
Message-ID: <20260918135030.171564-2-pbonzini@redhat.com> (raw)
In-Reply-To: <20260918135030.171564-1-pbonzini@redhat.com>
When a guest makes a slow HVCALL_SIGNAL_EVENT hypercall with a connection ID
that is valid in userspace but not registered in the kernel conn_to_evt,
kvm_hvcall_signal_event() reads the connection ID and overwrites hc->ingpa.
However, hc->param still signals that the hypercall was a slow one, and
userspace will then treat the connection ID as an address.
Cc: stable@vger.kernel.org
Fixes: bd38b32053eb ("KVM: hyper-v: Collect hypercall params into struct")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/hyperv.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 604651cb2739..d2921d443fde 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -2436,19 +2436,22 @@ static u16 kvm_hvcall_signal_event(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *h
{
struct kvm_hv *hv = to_kvm_hv(vcpu->kvm);
struct eventfd_ctx *eventfd;
+ u64 conn_id;
if (unlikely(!hc->fast)) {
int ret;
gpa_t gpa = hc->ingpa;
- if ((gpa & (__alignof__(hc->ingpa) - 1)) ||
- offset_in_page(gpa) + sizeof(hc->ingpa) > PAGE_SIZE)
+ if ((gpa & (__alignof__(conn_id) - 1)) ||
+ offset_in_page(gpa) + sizeof(conn_id) > PAGE_SIZE)
return HV_STATUS_INVALID_ALIGNMENT;
ret = kvm_vcpu_read_guest(vcpu, gpa,
- &hc->ingpa, sizeof(hc->ingpa));
+ &conn_id, sizeof(conn_id));
if (ret < 0)
return HV_STATUS_INVALID_ALIGNMENT;
+ } else {
+ conn_id = hc->ingpa;
}
/*
@@ -2456,15 +2459,15 @@ static u16 kvm_hvcall_signal_event(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *h
* have no use for it, and in all known usecases it is zero, so just
* report lookup failure if it isn't.
*/
- if (hc->ingpa & 0xffff00000000ULL)
+ if (conn_id & 0xffff00000000ULL)
return HV_STATUS_INVALID_PORT_ID;
/* remaining bits are reserved-zero */
- if (hc->ingpa & ~KVM_HYPERV_CONN_ID_MASK)
+ if (conn_id & ~KVM_HYPERV_CONN_ID_MASK)
return HV_STATUS_INVALID_HYPERCALL_INPUT;
/* the eventfd is protected by vcpu->kvm->srcu, but conn_to_evt isn't */
rcu_read_lock();
- eventfd = idr_find(&hv->conn_to_evt, hc->ingpa);
+ eventfd = idr_find(&hv->conn_to_evt, conn_id);
rcu_read_unlock();
if (!eventfd)
return HV_STATUS_INVALID_PORT_ID;
--
2.52.0
next prev parent reply other threads:[~2026-09-18 13:50 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 13:49 [PATCH v3 00/28] KVM: x86: Introduce memory protection attributes Paolo Bonzini
2026-09-18 13:50 ` Paolo Bonzini [this message]
2026-09-18 13:50 ` [PATCH 02/31] KVM: selftests: Take into account mixed memory fault flags Paolo Bonzini
2026-09-18 13:50 ` [PATCH 03/31] KVM: Define and communicate KVM_EXIT_MEMORY_FAULT RWX flags to userspace Paolo Bonzini
2026-09-18 13:50 ` [PATCH 04/31] KVM: selftests: Test address translation for Hyper-V direct L2 hypercalls Paolo Bonzini
2026-09-18 13:50 ` [PATCH 05/31] KVM: apply nGPA->GPA translation to KVM_HC_CLOCK_PAIRING Paolo Bonzini
2026-09-18 13:50 ` [PATCH 06/31] KVM: x86: Introduce memory fault on invalid hypercalls reads/writes Paolo Bonzini
2026-09-18 13:50 ` [PATCH 07/31] KVM: selftests: test hypercall memory fault exits Paolo Bonzini
2026-09-18 13:50 ` [PATCH 08/31] KVM: x86/mmu: intersect writability from __kvm_faultin_pfn with fault->map_writable Paolo Bonzini
2026-09-18 13:50 ` [PATCH 09/31] KVM: x86/mmu: Extend map_writable to a full ACC_* mask Paolo Bonzini
2026-09-18 13:50 ` [PATCH 10/31] KVM: x86/mmu: Init memslot hugepage information for non-private_mem VMs too Paolo Bonzini
2026-09-18 13:50 ` [PATCH 11/31] KVM: pass kvm == NULL case to kvm_arch_has_private_mem Paolo Bonzini
2026-09-18 13:50 ` [PATCH 12/31] KVM: adjust for presence of more than one attribute Paolo Bonzini
2026-09-18 13:50 ` [PATCH 13/31] KVM: Introduce NR/NW/NX memory attributes Paolo Bonzini
2026-09-18 13:50 ` [PATCH 14/31] KVM: Include memory protections in result of gfn->hva conversion Paolo Bonzini
2026-09-18 13:50 ` [PATCH 15/31] KVM: Introduce kvm_fetch_guest_page() and use it for x86 Paolo Bonzini
2026-09-18 13:50 ` [PATCH 16/31] KVM: Take memory protections into account for memory read/write/fetch Paolo Bonzini
2026-09-18 13:50 ` [PATCH 17/31] KVM: Take memory protections into account for __kvm_vcpu_map Paolo Bonzini
2026-09-18 13:50 ` [PATCH 18/31] KVM: Encapsulate memattrs array into anonymous struct Paolo Bonzini
2026-09-18 13:50 ` [PATCH 19/31] KVM: loongarch: do full validity check on the gfn-to-hva cache Paolo Bonzini
2026-09-18 13:50 ` [PATCH 20/31] KVM: Introduce kvm_check_gen()/kvm_memslots_check_gen() Paolo Bonzini
2026-09-18 13:50 ` [PATCH 21/31] KVM: Introduce a generation number for memory attributes Paolo Bonzini
2026-09-18 13:50 ` [PATCH 22/31] KVM: Take memory protections into account for accesses with cached gfn->hva Paolo Bonzini
2026-09-18 13:50 ` [PATCH 23/31] KVM: pfncache: Fail to refresh if it contains memory protections Paolo Bonzini
2026-09-18 13:50 ` [PATCH 24/31] KVM: x86/mmu: Do not prefetch sptes on gfns backed by memory attributes Paolo Bonzini
2026-09-18 13:50 ` [PATCH 25/31] KVM: x86/mmu: Take memory protection attributes into account during faults Paolo Bonzini
2026-09-18 13:50 ` [PATCH 26/31] KVM: x86/mmu: Issue memory fault exit if walk failed due to memory attribute Paolo Bonzini
2026-09-18 13:50 ` [PATCH 27/31] KVM: let kvm_arch_post_set_memory_attributes drop mmu_lock Paolo Bonzini
2026-09-18 13:50 ` [PATCH 28/31] KVM: x86/mmu: Obsolete all roots if memattr contains gPTEs Paolo Bonzini
2026-09-18 13:50 ` [PATCH 29/31] KVM: x86: selftests: Introduce memory protection attributes test Paolo Bonzini
2026-09-18 13:50 ` [PATCH 30/31] KVM: x86: selftests: Introduce memory attributes PTE test Paolo Bonzini
2026-09-18 13:50 ` [PATCH 31/31] KVM: x86: selftests: Introduce memory attributes side-channel tests Paolo Bonzini
2026-09-18 15:20 ` [PATCH v3 00/28] KVM: x86: Introduce memory protection attributes Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918135030.171564-2-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nsaenz@amazon.com \
--cc=snambakam@linux.microsoft.com \
--cc=stable@vger.kernel.org \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®