From: Rupesh Majhi <zoone.rupert@gmail.com>
To: "Andy Shevchenko" <andy@kernel.org>,
"Bill Wendling" <morbo@google.com>,
"David Lechner" <dlechner@baylibre.com>,
"Eddie James" <eajames@linux.ibm.com>,
"Joel Stanley" <joel@jms.id.au>,
"Jonathan Cameron" <jic23@kernel.org>,
"Justin Stitt" <justinstitt@google.com>,
"Nathan Chancellor" <nathan@kernel.org>,
"Nick Desaulniers" <ndesaulniers@google.com>,
"Nuno Sá" <nuno.sa@analog.com>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
llvm@lists.linux.dev, Rupesh Majhi <zoone.rupert@gmail.com>
Subject: [PATCH v8 00/10] iio: pressure: dps310: FIFO and triggered buffer support
Date: Mon, 21 Sep 2026 21:31:22 +0300 [thread overview]
Message-ID: <20260921183132.233136-1-zoone.rupert@gmail.com> (raw)
Jonathan's review fixes on v7. Same functionality, except the flush hook,
which now holds the device mode while it drains.
Since v7:
- the timestamp scan index lands in patch 5, where the enum is
- the FIFO drain reads with one loop counter, declarations split
- dps310_fifo_hold_free() is gone. It was a bare kfree() once the
clearing went, and the alloc side sets the fields instead
- the flush hook holds the mode across the drain, so a concurrent
buffer disable cannot free active_scan_mask under it. Found by
Sashiko on v7. Done with IIO_DEV_GUARD_CURRENT_MODE() and not the
buffer mode claim, which patch 10 warns on, see the reply on 9/10
Retested on a DPS310 on a BeagleBone Black: six of six buffer enables
produce data, and 64 scan reads come back whole at watermark 1, 8 and 24.
Built with clang 23 and CONFIG_WARN_CONTEXT_ANALYSIS, no warnings.
Patch 10 opts into clang context analysis and comes last, so it can be
dropped alone.
Deferred to a cleanup series: min_t() to min(), 1000 to KILO,
30 * USEC_PER_MSEC, David's define sort, c00/c10 via get_unaligned_be24().
Rupesh Majhi (10):
iio: pressure: dps310: fix CFG_REG bit definitions
iio: pressure: dps310: use a local device pointer in probe
iio: pressure: dps310: use get_unaligned_be24() for the 24-bit results
iio: pressure: dps310: take the lock once per raw read
iio: pressure: dps310: add triggered buffer support
iio: core: add an accessor for scan_timestamp
iio: pressure: dps310: read buffered samples from the hardware FIFO
iio: pressure: dps310: derive the drain interval from the watermark
iio: pressure: dps310: implement .hwfifo_flush_to_buffer()
iio: pressure: dps310: check the lock markings with context analysis
drivers/iio/pressure/Kconfig | 2 +
drivers/iio/pressure/Makefile | 2 +
drivers/iio/pressure/dps310.c | 726 ++++++++++++++++++++++++++++++----
include/linux/iio/iio.h | 9 +
4 files changed, 652 insertions(+), 87 deletions(-)
--
2.43.0
next reply other threads:[~2026-09-21 18:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 18:31 Rupesh Majhi [this message]
2026-09-21 18:31 ` [PATCH v8 01/10] iio: pressure: dps310: fix CFG_REG bit definitions Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 02/10] iio: pressure: dps310: use a local device pointer in probe Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 03/10] iio: pressure: dps310: use get_unaligned_be24() for the 24-bit results Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 04/10] iio: pressure: dps310: take the lock once per raw read Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 05/10] iio: pressure: dps310: add triggered buffer support Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 06/10] iio: core: add an accessor for scan_timestamp Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 07/10] iio: pressure: dps310: read buffered samples from the hardware FIFO Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 08/10] iio: pressure: dps310: derive the drain interval from the watermark Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 09/10] iio: pressure: dps310: implement .hwfifo_flush_to_buffer() Rupesh Majhi
2026-09-21 18:31 ` [PATCH v8 10/10] iio: pressure: dps310: check the lock markings with context analysis Rupesh Majhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260921183132.233136-1-zoone.rupert@gmail.com \
--to=zoone.rupert@gmail.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=eajames@linux.ibm.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=justinstitt@google.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®