* [PATCH net v7 0/2] octeontx2: Misc fixes for RVU drivers
@ 2026-09-22 10:21 Subrat Pandey
2026-09-22 10:21 ` [PATCH net v7 1/2] octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled Subrat Pandey
2026-09-22 10:21 ` [PATCH net v7 2/2] octeontx2-af: mcs: Fix SC resource cleanup loop Subrat Pandey
0 siblings, 2 replies; 3+ messages in thread
From: Subrat Pandey @ 2026-09-22 10:21 UTC (permalink / raw)
To: linux-kernel, netdev
Cc: pabeni, kuba, edumazet, davem, andrew+netdev, sbhatta, rkannoth,
gakula, sgoutham, subratp
A few independent fixes for the Marvell OcteonTX2 (RVU AF/PF) drivers:
- Fix aura/CQ BPID assignment under CONFIG_DCB, which assumed
queue_to_pfc_map was always allocated (not true for SDP VFs).
- Fix the SC resource cleanup loop that iterated over secy.max
instead of sc.max.
Changes in v7:
- v6: https://lore.kernel.org/all/20260910062657.3712256-1-subratp@marvell.com/
- patch 1: NULL check for queue_to_pfc_map in otx2_get_bpid_idx().
- patch 2: Reword commit message.
Changes in v6:
- None. Rebased onto latest net tree.
Changes in v5:
- patch 1: Fixing the compilation issue when CONFIG_DCB is
disabled.
Changes in v4:
- patch 1: Add 'inline' qualifier to otx2_get_bpid_idx() helper
defined in the header.
- patch 2: Correct commit subject in Fixes: tag to match the actual
upstream commit title.
Changes in v3:
- patch 1: Unify the BPID index logic into a shared otx2_get_bpid_idx()
helper, dropping the per-file #ifdef CONFIG_DCB.
- patch 2: Extend the sc.max fix to the SC stats loop in
mcs_clear_all_stats(); add Fixes: tag.
Changes in v2:
- Dropped "octeontx2-af: Fix mcs string buffer size", will
re-target it to net-next.
Baha Mesleh (1):
octeontx2-af: mcs: Fix SC resource cleanup loop
Geetha sowjanya (1):
octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled
drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 4 ++--
.../net/ethernet/marvell/octeontx2/nic/cn20k.c | 11 +----------
.../ethernet/marvell/octeontx2/nic/otx2_common.c | 16 ++++++----------
.../ethernet/marvell/octeontx2/nic/otx2_common.h | 9 +++++++++
4 files changed, 18 insertions(+), 22 deletions(-)
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH net v7 1/2] octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled
2026-09-22 10:21 [PATCH net v7 0/2] octeontx2: Misc fixes for RVU drivers Subrat Pandey
@ 2026-09-22 10:21 ` Subrat Pandey
2026-09-22 10:21 ` [PATCH net v7 2/2] octeontx2-af: mcs: Fix SC resource cleanup loop Subrat Pandey
1 sibling, 0 replies; 3+ messages in thread
From: Subrat Pandey @ 2026-09-22 10:21 UTC (permalink / raw)
To: linux-kernel, netdev
Cc: pabeni, kuba, edumazet, davem, andrew+netdev, sbhatta, rkannoth,
gakula, sgoutham, subratp
From: Geetha sowjanya <gakula@marvell.com>
Previously, BPID assignment under CONFIG_DCB assumed
`queue_to_pfc_map` was always initialized. For SDP VFs this leads to
invalid memory access as it was not initialized.
This patch adds a NULL check for `queue_to_pfc_map` before
dereferencing it. Also, simplifies the logic by always assigning a
default BPID first, then conditionally overriding it if CONFIG_DCB is
enabled and the map exists.
Fixes: 184fb40f731b ("octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subrat Pandey <subratp@marvell.com>
---
v7:
- v6: https://lore.kernel.org/all/20260910062657.3712256-2-subratp@marvell.com/
- Add NULL check for queue_to_pfc_map in otx2_get_bpid_idx().
v5:
- Fixing the compilation issue when CONFIG_DCB is
disabled.
v4:
- Fix otx2_get_bpid_idx() to be static inline.
v3:
- Unify BPID index logic into a shared otx2_get_bpid_idx() helper,
dropping the per-file #ifdef CONFIG_DCB and cn20k_aura_bpid_idx().
- Drop trailing period from the Fixes: tag.
.../net/ethernet/marvell/octeontx2/nic/cn20k.c | 11 +----------
.../ethernet/marvell/octeontx2/nic/otx2_common.c | 16 ++++++----------
.../ethernet/marvell/octeontx2/nic/otx2_common.h | 9 +++++++++
3 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c
index 8e41431c7f9c..e92b77789f08 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c
@@ -242,15 +242,6 @@ int cn20k_register_pfvf_mbox_intr(struct otx2_nic *pf, int numvfs)
#define RQ_BP_LVL_AURA (255 - ((85 * 256) / 100)) /* BP when 85% is full */
-static u8 cn20k_aura_bpid_idx(struct otx2_nic *pfvf, int aura_id)
-{
-#ifdef CONFIG_DCB
- return pfvf->queue_to_pfc_map[aura_id];
-#else
- return 0;
-#endif
-}
-
static int cn20k_tc_get_entry_index(struct otx2_flow_config *flow_cfg,
struct otx2_tc_flow *node)
{
@@ -580,7 +571,7 @@ static int cn20k_aura_aq_init(struct otx2_nic *pfvf, int aura_id,
if (pfvf->nix_blkaddr == BLKADDR_NIX1)
aq->aura.bp_ena = 1;
- bpid_idx = cn20k_aura_bpid_idx(pfvf, aura_id);
+ bpid_idx = otx2_get_bpid_idx(pfvf, aura_id);
aq->aura.bpid = pfvf->bpid[bpid_idx];
/* Set backpressure level for RQ's Aura */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 175992188c18..0f3f405d9f1b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -1055,6 +1055,7 @@ int otx2_cq_init(struct otx2_nic *pfvf, u16 qidx)
struct nix_aq_enq_req *aq;
struct otx2_cq_queue *cq;
struct otx2_pool *pool;
+ u8 bpid_idx;
cq = &qset->cq[qidx];
cq->cq_idx = qidx;
@@ -1132,11 +1133,8 @@ int otx2_cq_init(struct otx2_nic *pfvf, u16 qidx)
if (!is_otx2_lbkvf(pfvf->pdev)) {
/* Enable receive CQ backpressure */
aq->cq.bp_ena = 1;
-#ifdef CONFIG_DCB
- aq->cq.bpid = pfvf->bpid[pfvf->queue_to_pfc_map[qidx]];
-#else
- aq->cq.bpid = pfvf->bpid[0];
-#endif
+ bpid_idx = otx2_get_bpid_idx(pfvf, qidx);
+ aq->cq.bpid = pfvf->bpid[bpid_idx];
/* Set backpressure level is same as cq pass level */
aq->cq.bp = RQ_PASS_LVL_CQ(pfvf->hw.rq_skid, qset->rqe_cnt);
@@ -1378,6 +1376,7 @@ int otx2_aura_aq_init(struct otx2_nic *pfvf, int aura_id,
{
struct npa_aq_enq_req *aq;
struct otx2_pool *pool;
+ u8 bpid_idx;
int err;
pool = &pfvf->qset.pool[pool_id];
@@ -1433,11 +1432,8 @@ int otx2_aura_aq_init(struct otx2_nic *pfvf, int aura_id,
*/
if (pfvf->nix_blkaddr == BLKADDR_NIX1)
aq->aura.bp_ena = 1;
-#ifdef CONFIG_DCB
- aq->aura.nix0_bpid = pfvf->bpid[pfvf->queue_to_pfc_map[aura_id]];
-#else
- aq->aura.nix0_bpid = pfvf->bpid[0];
-#endif
+ bpid_idx = otx2_get_bpid_idx(pfvf, aura_id);
+ aq->aura.nix0_bpid = pfvf->bpid[bpid_idx];
/* Set backpressure level for RQ's Aura */
aq->aura.bp = RQ_BP_LVL_AURA;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index eecee612b7b2..44cd56a0c2c4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -1029,6 +1029,15 @@ static inline int otx2_tc_flower_rule_cnt(struct otx2_nic *pfvf)
return pfvf->flow_cfg->nr_flows;
}
+static inline u8 otx2_get_bpid_idx(struct otx2_nic *pfvf, int qidx)
+{
+#ifdef CONFIG_DCB
+ if (pfvf->queue_to_pfc_map)
+ return pfvf->queue_to_pfc_map[qidx];
+#endif
+ return 0;
+}
+
/* MSI-X APIs */
void otx2_free_cints(struct otx2_nic *pfvf, int n);
void otx2_set_cints_affinity(struct otx2_nic *pfvf);
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH net v7 2/2] octeontx2-af: mcs: Fix SC resource cleanup loop
2026-09-22 10:21 [PATCH net v7 0/2] octeontx2: Misc fixes for RVU drivers Subrat Pandey
2026-09-22 10:21 ` [PATCH net v7 1/2] octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled Subrat Pandey
@ 2026-09-22 10:21 ` Subrat Pandey
1 sibling, 0 replies; 3+ messages in thread
From: Subrat Pandey @ 2026-09-22 10:21 UTC (permalink / raw)
To: linux-kernel, netdev
Cc: pabeni, kuba, edumazet, davem, andrew+netdev, sbhatta, rkannoth,
gakula, sgoutham, subratp
From: Baha Mesleh <baha.mesleh@nokia.com>
The SC resource cleanup and statistics loops were incorrectly
iterating over secy.max instead of sc.max, so the highest SC id
could be left allocated across teardown or FLR. Use sc.max as
the loop bound.
Fixes: cfc14181d497 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources")
Signed-off-by: Baha Mesleh <baha.mesleh@nokia.com>
Signed-off-by: Subrat Pandey <subratp@marvell.com>
---
v7:
- v6: https://lore.kernel.org/all/20260910062657.3712256-3-subratp@marvell.com/
- Reword commit message.
v4:
- Correct the Fixes: tag commit subject to match the actual upstream
commit title.
v3:
- Extend the sc.max fix to the SC stats loop in mcs_clear_all_stats()
(v2 fixed only mcs_free_all_rsrc()).
- Add Fixes: tag and reword commit message.
drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
index 211c10aa5880..30c672d526a0 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
@@ -314,7 +314,7 @@ int mcs_clear_all_stats(struct mcs *mcs, u16 pcifunc, int dir)
}
/* Clear SC stats */
- for (id = 0; id < map->secy.max; id++) {
+ for (id = 0; id < map->sc.max; id++) {
if (map->sc2pf_map[id] != pcifunc)
continue;
mcs_clear_stats(mcs, MCS_SC_STATS, id, dir);
@@ -738,7 +738,7 @@ int mcs_free_all_rsrc(struct mcs *mcs, int dir, u16 pcifunc)
}
/* free sc entries */
- for (id = 0; id < map->secy.max; id++) {
+ for (id = 0; id < map->sc.max; id++) {
if (map->sc2pf_map[id] != pcifunc)
continue;
mcs_free_rsrc(&map->sc, map->sc2pf_map, id, pcifunc);
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-09-22 10:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-22 10:21 [PATCH net v7 0/2] octeontx2: Misc fixes for RVU drivers Subrat Pandey
2026-09-22 10:21 ` [PATCH net v7 1/2] octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled Subrat Pandey
2026-09-22 10:21 ` [PATCH net v7 2/2] octeontx2-af: mcs: Fix SC resource cleanup loop Subrat Pandey
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®