From: Chancel Liu <chancel.liu@oss.nxp.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Oder Chiou <oder_chiou@realtek.com>,
Cezary Rojewski <cezary.rojewski@intel.com>
Cc: Support Opensource <support.opensource@diasemi.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@opensource.cirrus.com
Subject: [PATCH v2 15/21] ASoC: codecs: wm8985: Move regulator acquisition to the bus probe
Date: Wed, 23 Sep 2026 15:12:59 +0900 [thread overview]
Message-ID: <20260923061305.4041197-16-chancel.liu@oss.nxp.com> (raw)
In-Reply-To: <20260923061305.4041197-1-chancel.liu@oss.nxp.com>
From: Chancel Liu <chancel.liu@nxp.com>
component->dev is the underlying i2c/spi device whose devres is only
released on physical device removal, not on ASoC card unbind. Getting
the regulator supplies with devm_regulator_bulk_get(component->dev, ...)
in the component probe therefore leaks the regulator references on every
card bind/unbind cycle.
Move the devm_regulator_bulk_get() into a helper called from the i2c and
spi probes so the supplies are tied to the physical device lifetime.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
sound/soc/codecs/wm8985.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/wm8985.c b/sound/soc/codecs/wm8985.c
index 877a691c188b..1e862609f5b3 100644
--- a/sound/soc/codecs/wm8985.c
+++ b/sound/soc/codecs/wm8985.c
@@ -1029,23 +1029,30 @@ static int wm8985_set_bias_level(struct snd_soc_component *component,
return 0;
}
-static int wm8985_probe(struct snd_soc_component *component)
+static int wm8985_get_regulators(struct device *dev,
+ struct wm8985_priv *wm8985)
{
size_t i;
- struct wm8985_priv *wm8985;
int ret;
- wm8985 = snd_soc_component_get_drvdata(component);
-
for (i = 0; i < ARRAY_SIZE(wm8985->supplies); i++)
wm8985->supplies[i].supply = wm8985_supply_names[i];
- ret = devm_regulator_bulk_get(component->dev, ARRAY_SIZE(wm8985->supplies),
- wm8985->supplies);
- if (ret) {
- dev_err(component->dev, "Failed to request supplies: %d\n", ret);
- return ret;
- }
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8985->supplies),
+ wm8985->supplies);
+ if (ret)
+ dev_err(dev, "Failed to request supplies: %d\n", ret);
+
+ return ret;
+}
+
+static int wm8985_probe(struct snd_soc_component *component)
+{
+ size_t i;
+ struct wm8985_priv *wm8985;
+ int ret;
+
+ wm8985 = snd_soc_component_get_drvdata(component);
ret = regulator_bulk_enable(ARRAY_SIZE(wm8985->supplies),
wm8985->supplies);
@@ -1176,6 +1183,10 @@ static int wm8985_spi_probe(struct spi_device *spi)
return ret;
}
+ ret = wm8985_get_regulators(&spi->dev, wm8985);
+ if (ret)
+ return ret;
+
ret = devm_snd_soc_register_component(&spi->dev,
&soc_component_dev_wm8985, &wm8985_dai, 1);
return ret;
@@ -1212,6 +1223,10 @@ static int wm8985_i2c_probe(struct i2c_client *i2c)
return ret;
}
+ ret = wm8985_get_regulators(&i2c->dev, wm8985);
+ if (ret)
+ return ret;
+
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8985, &wm8985_dai, 1);
return ret;
--
2.50.1
next prev parent reply other threads:[~2026-09-23 6:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-23 6:12 [PATCH v2 00/21] ASoC: codecs: Fix resource leaks across card bind/unbind Chancel Liu
2026-09-23 6:12 ` [PATCH v2 01/21] ASoC: codecs: cpcap: Fix devm " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 02/21] ASoC: codecs: da7218: " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 03/21] ASoC: codecs: tlv320aic32x4: Fix clock leak from runtime callbacks Chancel Liu
2026-09-23 6:12 ` [PATCH v2 04/21] ASoC: codecs: twl4030: Acquire board params and hs_extmute GPIO in the platform probe Chancel Liu
2026-09-23 6:12 ` [PATCH v2 05/21] ASoC: codecs: es8316: Move mclk acquisition to the i2c probe Chancel Liu
2026-09-23 8:19 ` Cezary Rojewski
2026-09-23 6:12 ` [PATCH v2 06/21] ASoC: codecs: es8323: " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 07/21] ASoC: codecs: es8311: " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 08/21] ASoC: codecs: es8328: Move clk acquisition to the bus probe Chancel Liu
2026-09-23 6:12 ` [PATCH v2 09/21] ASoC: codecs: rt5640: Move mclk acquisition to the i2c probe Chancel Liu
2026-09-23 8:16 ` Cezary Rojewski
2026-09-23 8:22 ` Chancel Liu
2026-09-23 6:12 ` [PATCH v2 10/21] ASoC: codecs: rt5616: " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 11/21] ASoC: codecs: rt5514: Move clk " Chancel Liu
2026-09-23 8:19 ` Cezary Rojewski
2026-09-23 6:12 ` [PATCH v2 12/21] ASoC: codecs: rt5682s: Move mclk " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 13/21] ASoC: codecs: max98090: " Chancel Liu
2026-09-23 6:12 ` [PATCH v2 14/21] ASoC: codecs: max98095: " Chancel Liu
2026-09-23 6:12 ` Chancel Liu [this message]
2026-09-23 8:56 ` [PATCH v2 15/21] ASoC: codecs: wm8985: Move regulator acquisition to the bus probe Charles Keepax
2026-09-23 6:13 ` [PATCH v2 16/21] ASoC: codecs: wm8955: Move regulator acquisition to the i2c probe Chancel Liu
2026-09-23 6:13 ` [PATCH v2 17/21] ASoC: codecs: es8389: Move regulator and mclk " Chancel Liu
2026-09-23 6:13 ` [PATCH v2 18/21] ASoC: codecs: rt5677-spi: Free the DSP context on component remove Chancel Liu
2026-09-23 6:13 ` [PATCH v2 19/21] ASoC: codecs: rt1011: Free the bq/drc coefficient arrays " Chancel Liu
2026-09-23 6:13 ` [PATCH v2 20/21] ASoC: codecs: rt5645: Free the hardware EQ parameters " Chancel Liu
2026-09-23 6:13 ` [PATCH v2 21/21] ASoC: codecs: rt5514-spi: Free the DSP context " Chancel Liu
2026-09-23 12:27 ` [PATCH v2 00/21] ASoC: codecs: Fix resource leaks across card bind/unbind Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260923061305.4041197-16-chancel.liu@oss.nxp.com \
--to=chancel.liu@oss.nxp.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=ckeepax@opensource.cirrus.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=support.opensource@diasemi.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®