mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chancel Liu <chancel.liu@oss.nxp.com>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	Oder Chiou <oder_chiou@realtek.com>,
	Cezary Rojewski <cezary.rojewski@intel.com>
Cc: Support Opensource <support.opensource@diasemi.com>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@opensource.cirrus.com
Subject: [PATCH v2 06/21] ASoC: codecs: es8323: Move mclk acquisition to the i2c probe
Date: Wed, 23 Sep 2026 15:12:50 +0900	[thread overview]
Message-ID: <20260923061305.4041197-7-chancel.liu@oss.nxp.com> (raw)
In-Reply-To: <20260923061305.4041197-1-chancel.liu@oss.nxp.com>

From: Chancel Liu <chancel.liu@nxp.com>

component->dev is the underlying i2c device whose devres is only
released on physical device removal, not on ASoC card unbind. Getting
the mclk with devm_clk_get_optional(component->dev, ...) in the
component probe therefore leaks a clk reference on every card
bind/unbind cycle.

Move the devm_clk_get_optional() to es8323_i2c_probe() so the clk
reference is tied to the i2c device lifetime.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
 sound/soc/codecs/es8323.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/es8323.c b/sound/soc/codecs/es8323.c
index 12fcfe017ab2..3f7fbbdb111e 100644
--- a/sound/soc/codecs/es8323.c
+++ b/sound/soc/codecs/es8323.c
@@ -671,15 +671,6 @@ static int es8323_probe(struct snd_soc_component *component)
 	struct es8323_priv *es8323 = snd_soc_component_get_drvdata(component);
 	int ret;
 
-	es8323->mclk = devm_clk_get_optional(component->dev, "mclk");
-	if (IS_ERR(es8323->mclk)) {
-		dev_err(component->dev, "unable to get mclk\n");
-		return PTR_ERR(es8323->mclk);
-	}
-
-	if (!es8323->mclk)
-		dev_warn(component->dev, "assuming static mclk\n");
-
 	ret = clk_prepare_enable(es8323->mclk);
 	if (ret) {
 		dev_err(component->dev, "unable to enable mclk\n");
@@ -789,6 +780,12 @@ static int es8323_i2c_probe(struct i2c_client *i2c_client)
 
 	i2c_set_clientdata(i2c_client, es8323);
 
+	es8323->mclk = devm_clk_get_optional(dev, "mclk");
+	if (IS_ERR(es8323->mclk))
+		return dev_err_probe(dev, PTR_ERR(es8323->mclk), "unable to get mclk\n");
+	if (!es8323->mclk)
+		dev_warn(dev, "assuming static mclk\n");
+
 	es8323->regmap = devm_regmap_init_i2c(i2c_client, &es8323_regmap);
 	if (IS_ERR(es8323->regmap))
 		return PTR_ERR(es8323->regmap);
-- 
2.50.1


  parent reply	other threads:[~2026-09-23  6:14 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-23  6:12 [PATCH v2 00/21] ASoC: codecs: Fix resource leaks across card bind/unbind Chancel Liu
2026-09-23  6:12 ` [PATCH v2 01/21] ASoC: codecs: cpcap: Fix devm " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 02/21] ASoC: codecs: da7218: " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 03/21] ASoC: codecs: tlv320aic32x4: Fix clock leak from runtime callbacks Chancel Liu
2026-09-23  6:12 ` [PATCH v2 04/21] ASoC: codecs: twl4030: Acquire board params and hs_extmute GPIO in the platform probe Chancel Liu
2026-09-23  6:12 ` [PATCH v2 05/21] ASoC: codecs: es8316: Move mclk acquisition to the i2c probe Chancel Liu
2026-09-23  8:19   ` Cezary Rojewski
2026-09-23  6:12 ` Chancel Liu [this message]
2026-09-23  6:12 ` [PATCH v2 07/21] ASoC: codecs: es8311: " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 08/21] ASoC: codecs: es8328: Move clk acquisition to the bus probe Chancel Liu
2026-09-23  6:12 ` [PATCH v2 09/21] ASoC: codecs: rt5640: Move mclk acquisition to the i2c probe Chancel Liu
2026-09-23  8:16   ` Cezary Rojewski
2026-09-23  8:22     ` Chancel Liu
2026-09-23  6:12 ` [PATCH v2 10/21] ASoC: codecs: rt5616: " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 11/21] ASoC: codecs: rt5514: Move clk " Chancel Liu
2026-09-23  8:19   ` Cezary Rojewski
2026-09-23  6:12 ` [PATCH v2 12/21] ASoC: codecs: rt5682s: Move mclk " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 13/21] ASoC: codecs: max98090: " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 14/21] ASoC: codecs: max98095: " Chancel Liu
2026-09-23  6:12 ` [PATCH v2 15/21] ASoC: codecs: wm8985: Move regulator acquisition to the bus probe Chancel Liu
2026-09-23  8:56   ` Charles Keepax
2026-09-23  6:13 ` [PATCH v2 16/21] ASoC: codecs: wm8955: Move regulator acquisition to the i2c probe Chancel Liu
2026-09-23  6:13 ` [PATCH v2 17/21] ASoC: codecs: es8389: Move regulator and mclk " Chancel Liu
2026-09-23  6:13 ` [PATCH v2 18/21] ASoC: codecs: rt5677-spi: Free the DSP context on component remove Chancel Liu
2026-09-23  6:13 ` [PATCH v2 19/21] ASoC: codecs: rt1011: Free the bq/drc coefficient arrays " Chancel Liu
2026-09-23  6:13 ` [PATCH v2 20/21] ASoC: codecs: rt5645: Free the hardware EQ parameters " Chancel Liu
2026-09-23  6:13 ` [PATCH v2 21/21] ASoC: codecs: rt5514-spi: Free the DSP context " Chancel Liu
2026-09-23 12:27 ` [PATCH v2 00/21] ASoC: codecs: Fix resource leaks across card bind/unbind Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260923061305.4041197-7-chancel.liu@oss.nxp.com \
    --to=chancel.liu@oss.nxp.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=oder_chiou@realtek.com \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=support.opensource@diasemi.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®