[PATCH] powerpc: dts: turris1x: use qca8337 internal PHYs

[PATCH] powerpc: dts: turris1x: use qca8337 internal PHYs

[Rosen Penev]

The QCA8337 switch has a managed internal MDIO bus for its built-in
PHYs.  Declare the five PHYs in an mdio subnode of the switch and
link the LAN ports to them with phy-mode = "internal" and
phy-handle, so each switch port is connected to the correct internal
PHY instead of relying on the implicit legacy port-to-PHY mapping.

Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 arch/powerpc/boot/dts/turris1x.dts | 35 ++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts
index d0b7c62b8c6e..58c9e7b34e50 100644
--- a/arch/powerpc/boot/dts/turris1x.dts
+++ b/arch/powerpc/boot/dts/turris1x.dts
@@ -174,26 +174,36 @@ fixed-link {
 					port@1 {
 						reg = <1>;
 						label = "lan5";
+						phy-mode = "internal";
+						phy-handle = <&phy_port1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan4";
+						phy-mode = "internal";
+						phy-handle = <&phy_port2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan3";
+						phy-mode = "internal";
+						phy-handle = <&phy_port3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan2";
+						phy-mode = "internal";
+						phy-handle = <&phy_port4>;
 					};
 
 					port@5 {
 						reg = <5>;
 						label = "lan1";
+						phy-mode = "internal";
+						phy-handle = <&phy_port5>;
 					};
 
 					port@6 {
@@ -208,6 +218,31 @@ fixed-link {
 						};
 					};
 				};
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					phy_port1: ethernet-phy@0 {
+						reg = <0>;
+					};
+
+					phy_port2: ethernet-phy@1 {
+						reg = <1>;
+					};
+
+					phy_port3: ethernet-phy@2 {
+						reg = <2>;
+					};
+
+					phy_port4: ethernet-phy@3 {
+						reg = <3>;
+					};
+
+					phy_port5: ethernet-phy@4 {
+						reg = <4>;
+					};
+				};
 			};
 		};
 
-- 
2.55.0