From: Jiaxing Hu <gahing@gahingwoo.com>
To: tomeu@tomeuvizoso.net, heiko@sntech.de, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, joro@8bytes.org,
will@kernel.org, robin.murphy@arm.com, ulfh@kernel.org,
p.zabel@pengutronix.de, ogabbay@kernel.org,
zhangqing@rock-chips.com
Cc: royalnet026@gmail.com, abel.vesa@oss.qualcomm.com,
sebastian.reichel@collabora.com, sidong.yang@furiosa.ai,
u.kleine-koenig@baylibre.com, chaoyi.chen@rock-chips.com,
diederik@cknow-tech.com, alchark@flipper.net,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org, iommu@lists.linux.dev,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jiaxing Hu <gahing@gahingwoo.com>
Subject: [PATCH v14 02/15] accel/rocket: take the completion register writes under job_lock
Date: Thu, 24 Sep 2026 22:21:22 +1200 [thread overview]
Message-ID: <20260924102135.92217-3-gahing@gahingwoo.com> (raw)
In-Reply-To: <20260924102135.92217-1-gahing@gahingwoo.com>
rocket_job_handle_irq() writes OPERATION_ENABLE and INTERRUPT_CLEAR before
taking job_lock, while rocket_job_hw_submit() writes OPERATION_ENABLE under
it, so a completion can write its zero after a submit has written its one
and stop a task that has just started. Move both writes inside the existing
scoped_guard().
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # RK3588, three cores, induced reset, JOB_TIMEOUT_MS=2
---
drivers/accel/rocket/rocket_job.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/accel/rocket/rocket_job.c b/drivers/accel/rocket/rocket_job.c
index f40435505..575945015 100644
--- a/drivers/accel/rocket/rocket_job.c
+++ b/drivers/accel/rocket/rocket_job.c
@@ -345,10 +345,15 @@ static void rocket_job_handle_irq(struct rocket_core *core)
{
pm_runtime_mark_last_busy(core->dev);
- rocket_pc_writel(core, OPERATION_ENABLE, 0x0);
- rocket_pc_writel(core, INTERRUPT_CLEAR, 0x1ffff);
+ scoped_guard(mutex, &core->job_lock) {
+ /*
+ * Stopping the block belongs under the lock. hw_submit() writes
+ * OPERATION_ENABLE too, and outside the lock this zero can land
+ * after that one and stop a task that has only just started.
+ */
+ rocket_pc_writel(core, OPERATION_ENABLE, 0x0);
+ rocket_pc_writel(core, INTERRUPT_CLEAR, 0x1ffff);
- scoped_guard(mutex, &core->job_lock)
if (core->in_flight_job) {
if (core->in_flight_job->next_task_idx < core->in_flight_job->task_count) {
rocket_job_hw_submit(core, core->in_flight_job);
@@ -360,6 +365,7 @@ static void rocket_job_handle_irq(struct rocket_core *core)
pm_runtime_put_autosuspend(core->dev);
core->in_flight_job = NULL;
}
+ }
}
static void
--
2.43.0
next prev parent reply other threads:[~2026-09-24 10:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 10:21 [PATCH v14 00/15] accel/rocket: RK3576 NPU (RKNN) enablement Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 01/15] accel/rocket: request the core clocks by name Jiaxing Hu
2026-09-24 10:21 ` Jiaxing Hu [this message]
2026-09-24 10:21 ` [PATCH v14 03/15] accel/rocket: wait for a running IRQ handler before resetting a core Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 04/15] accel/rocket: let the core suspend after a reset Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 05/15] accel/rocket: factor the completion tail out of the IRQ handler Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 06/15] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 07/15] dt-bindings: power: rockchip: allow resets in a power domain node Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 08/15] dt-bindings: iommu: rockchip: describe the RK3576 NPU MMU Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 09/15] pmdomain: rockchip: add optional per-domain power-on settle delay Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 10/15] pmdomain: rockchip: cycle an optional power-domain reset on power-on Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 11/15] accel/rocket: select the per-core clock and reset counts from match data Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 12/15] accel/rocket: add RK3576 NPU (RKNN) support Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 13/15] arm64: dts: rockchip: add NPU core domain clocks and resets to rk3576 Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 14/15] arm64: dts: rockchip: add NPU (RKNN) nodes " Jiaxing Hu
2026-09-24 10:21 ` [PATCH v14 15/15] arm64: dts: rockchip: enable the NPU on rk3576-rock-4d Jiaxing Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260924102135.92217-3-gahing@gahingwoo.com \
--to=gahing@gahingwoo.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=alchark@flipper.net \
--cc=chaoyi.chen@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=diederik@cknow-tech.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=ogabbay@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=royalnet026@gmail.com \
--cc=sebastian.reichel@collabora.com \
--cc=sidong.yang@furiosa.ai \
--cc=tomeu@tomeuvizoso.net \
--cc=u.kleine-koenig@baylibre.com \
--cc=ulfh@kernel.org \
--cc=will@kernel.org \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®