mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ali via B4 Relay <devnull+aliresool567.gmail.com@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	 stable@vger.kernel.org, Ali <aliresool567@gmail.com>
Subject: [PATCH] USB: quirks: add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for GameSir G7 SE
Date: Sun, 27 Sep 2026 18:54:01 +0300	[thread overview]
Message-ID: <20260927-master-v1-1-96ff85291b25@gmail.com> (raw)

From: Ali <aliresool567@gmail.com>

The GameSir G7 SE wired controller first enumerates as 3537:10a0 and
then re-enumerates in a mode it picks from how the host enumerated it.

When the configuration descriptor is fetched the Linux way, 9 bytes
followed by the full 80, the controller disconnects about 1 ms after
its string descriptors have been read, before SET_CONFIGURATION, and
comes back as 3537:1082, a generic HID gamepad without force feedback.

When the configuration descriptor is fetched in one 255-byte request,
as Windows does, it comes back as 3537:1010 in Xbox One (GIP) mode,
which xpad already supports, including rumble.

Skipping the device qualifier requests (USB_QUIRK_DEVICE_QUALIFIER)
makes no difference; the configuration descriptor request size alone
decides the mode. Add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for the 10a0
identity, as is already done for the ShanWan Wireless Gamepad.

Cc: stable@vger.kernel.org
Assisted-by: claude-opus-5-5
Signed-off-by: Ali <aliresool567@gmail.com>
---
Tested on 7.2.7 (x86_64, xHCI) by setting usbcore.quirks=3537:10a0:r at
runtime. With it, the controller settles as 3537:1010 on every plug-in,
is bound by xpad as "GameSir G7 SE", and rumble works through xpad's
force feedback. Without it, it settles as 3537:1082 every time. The
patch itself is against v7.3-rc5.

usbmon of the 3537:10a0 enumeration without the quirk: GET_DESCRIPTOR
(CONFIGURATION) with wLength 9, then 80, then string descriptors 0, 2,
1 and 3. The port reports a disconnect about 1 ms after the serial
number string, and the SET_CONFIGURATION that follows fails with
-EPROTO. With the quirk, the only difference is a single wLength 255
configuration request, after which the device re-enumerates as
3537:1010.
---
 drivers/usb/core/quirks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index b5b577f..a4bcbe9 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -612,6 +612,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* ezcap401 - BOS descriptor fetch hangs at SuperSpeed Plus */
 	{ USB_DEVICE(0x32ed, 0x0401), .driver_info = USB_QUIRK_NO_BOS },
 
+	/* GameSir G7 SE */
+	{ USB_DEVICE(0x3537, 0x10a0), .driver_info = USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE },
+
 	/* DELL USB GEN2 */
 	{ USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME },
 

---
base-commit: fd179f8a05be3ccae366b9b96e176b51fbe54aab
change-id: 20260927-master-799b75b330e6

Best regards,
--  
Ali <aliresool567@gmail.com>



                 reply	other threads:[~2026-09-27 15:54 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260927-master-v1-1-96ff85291b25@gmail.com \
    --to=devnull+aliresool567.gmail.com@kernel.org \
    --cc=aliresool567@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®