mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] USB: quirks: add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for GameSir G7 SE
@ 2026-09-27 15:54 Ali via B4 Relay
  0 siblings, 0 replies; only message in thread
From: Ali via B4 Relay @ 2026-09-27 15:54 UTC (permalink / raw)
  To: Greg Kroah-Hartman; +Cc: linux-usb, linux-kernel, stable, Ali

From: Ali <aliresool567@gmail.com>

The GameSir G7 SE wired controller first enumerates as 3537:10a0 and
then re-enumerates in a mode it picks from how the host enumerated it.

When the configuration descriptor is fetched the Linux way, 9 bytes
followed by the full 80, the controller disconnects about 1 ms after
its string descriptors have been read, before SET_CONFIGURATION, and
comes back as 3537:1082, a generic HID gamepad without force feedback.

When the configuration descriptor is fetched in one 255-byte request,
as Windows does, it comes back as 3537:1010 in Xbox One (GIP) mode,
which xpad already supports, including rumble.

Skipping the device qualifier requests (USB_QUIRK_DEVICE_QUALIFIER)
makes no difference; the configuration descriptor request size alone
decides the mode. Add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for the 10a0
identity, as is already done for the ShanWan Wireless Gamepad.

Cc: stable@vger.kernel.org
Assisted-by: claude-opus-5-5
Signed-off-by: Ali <aliresool567@gmail.com>
---
Tested on 7.2.7 (x86_64, xHCI) by setting usbcore.quirks=3537:10a0:r at
runtime. With it, the controller settles as 3537:1010 on every plug-in,
is bound by xpad as "GameSir G7 SE", and rumble works through xpad's
force feedback. Without it, it settles as 3537:1082 every time. The
patch itself is against v7.3-rc5.

usbmon of the 3537:10a0 enumeration without the quirk: GET_DESCRIPTOR
(CONFIGURATION) with wLength 9, then 80, then string descriptors 0, 2,
1 and 3. The port reports a disconnect about 1 ms after the serial
number string, and the SET_CONFIGURATION that follows fails with
-EPROTO. With the quirk, the only difference is a single wLength 255
configuration request, after which the device re-enumerates as
3537:1010.
---
 drivers/usb/core/quirks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index b5b577f..a4bcbe9 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -612,6 +612,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* ezcap401 - BOS descriptor fetch hangs at SuperSpeed Plus */
 	{ USB_DEVICE(0x32ed, 0x0401), .driver_info = USB_QUIRK_NO_BOS },
 
+	/* GameSir G7 SE */
+	{ USB_DEVICE(0x3537, 0x10a0), .driver_info = USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE },
+
 	/* DELL USB GEN2 */
 	{ USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME },
 

---
base-commit: fd179f8a05be3ccae366b9b96e176b51fbe54aab
change-id: 20260927-master-799b75b330e6

Best regards,
--  
Ali <aliresool567@gmail.com>



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-09-27 15:54 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-27 15:54 [PATCH] USB: quirks: add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for GameSir G7 SE Ali via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®