From: Jacky Chou <jacky_chou@aspeedtech.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Po-Yu Chuang <ratbert@faraday-tech.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Jacky Chou <jacky_chou@aspeedtech.com>
Subject: [PATCH 3/5] net: ftgmac100: Enable AST2700 RMII support
Date: Sun, 27 Sep 2026 15:16:22 +0800 [thread overview]
Message-ID: <20260927-support_ast2700-v1-3-9f03f29d2c82@aspeedtech.com> (raw)
In-Reply-To: <20260927-support_ast2700-v1-0-9f03f29d2c82@aspeedtech.com>
Set the RMII enable bit when an AST2700 port uses RMII so the MAC is
programmed for the selected interface mode. Describe the requirement as
a match-data quirk instead of checking the MAC generation in the data
path, allowing later compatible controllers to opt into the behavior.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
drivers/net/ethernet/faraday/ftgmac100.c | 16 ++++++++++++++--
drivers/net/ethernet/faraday/ftgmac100.h | 1 +
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 67b1fa464a42..b835472da360 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -41,8 +41,11 @@ enum ftgmac100_mac_id {
FTGMAC100_AST2700
};
+#define FTGMAC100_QUIRK_RMII_ENABLE BIT(0)
+
struct ftgmac100_match_data {
enum ftgmac100_mac_id mac_id;
+ u32 quirks;
};
/* Arbitrary values, I am not sure the HW has limits */
@@ -79,6 +82,7 @@ struct ftgmac100 {
void __iomem *base;
enum ftgmac100_mac_id mac_id;
+ u32 quirks;
/* Rx ring */
unsigned int rx_q_entries;
@@ -355,6 +359,7 @@ static void ftgmac100_init_hw(struct ftgmac100 *priv)
static void ftgmac100_start_hw(struct ftgmac100 *priv)
{
u32 maccr = ioread32(priv->base + FTGMAC100_OFFSET_MACCR);
+ struct phy_device *phydev = priv->netdev->phydev;
/* Keep the original GMAC and FAST bits */
maccr &= (FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_GIGA_MODE);
@@ -383,6 +388,11 @@ static void ftgmac100_start_hw(struct ftgmac100 *priv)
if (priv->netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
maccr |= FTGMAC100_MACCR_RM_VLAN;
+ if ((priv->quirks & FTGMAC100_QUIRK_RMII_ENABLE) &&
+ phydev->interface == PHY_INTERFACE_MODE_RMII) {
+ maccr |= FTGMAC100_MACCR_RMII_ENABLE;
+ }
+
/* Hit the HW */
iowrite32(maccr, priv->base + FTGMAC100_OFFSET_MACCR);
}
@@ -1942,7 +1952,7 @@ static int ftgmac100_probe_dt(struct net_device *netdev,
static int ftgmac100_probe(struct platform_device *pdev)
{
- const struct ftgmac100_match_data *match_data;
+ const struct ftgmac100_match_data *match_data = NULL;
enum ftgmac100_mac_id mac_id;
struct resource *res;
int irq;
@@ -1987,6 +1997,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
priv->netdev = netdev;
priv->dev = &pdev->dev;
priv->mac_id = mac_id;
+ priv->quirks = match_data ? match_data->quirks : 0;
INIT_WORK(&priv->reset_task, ftgmac100_reset_task);
/* map io memory */
@@ -2134,7 +2145,8 @@ static const struct ftgmac100_match_data ftgmac100_match_data_ast2600 = {
};
static const struct ftgmac100_match_data ftgmac100_match_data_ast2700 = {
- .mac_id = FTGMAC100_AST2700
+ .mac_id = FTGMAC100_AST2700,
+ .quirks = FTGMAC100_QUIRK_RMII_ENABLE,
};
static const struct ftgmac100_match_data ftgmac100_match_data_faraday = {
diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 4968f6f0bdbc..8c35c895b146 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -167,6 +167,7 @@
#define FTGMAC100_MACCR_RX_BROADPKT (1 << 17)
#define FTGMAC100_MACCR_DISCARD_CRCERR (1 << 18)
#define FTGMAC100_MACCR_FAST_MODE (1 << 19)
+#define FTGMAC100_MACCR_RMII_ENABLE BIT(20)
#define FTGMAC100_MACCR_SW_RST (1 << 31)
/*
--
2.34.1
next prev parent reply other threads:[~2026-09-27 7:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 7:16 [PATCH 0/5] net: ftgmac100: Add AST2700 support Jacky Chou
2026-09-27 7:16 ` [PATCH 1/5] dt-bindings: net: ftgmac100: Add AST2700 compatible Jacky Chou
2026-09-27 7:16 ` [PATCH 2/5] net: ftgmac100: Add AST2700 compatible support Jacky Chou
2026-09-27 7:16 ` Jacky Chou [this message]
2026-09-27 7:16 ` [PATCH 4/5] net: ftgmac100: Add AST2700 upper DMA address support Jacky Chou
2026-09-27 7:16 ` [PATCH 5/5] net: ftgmac100: Allow building on ARM64 Jacky Chou
2026-09-27 17:39 ` [PATCH 0/5] net: ftgmac100: Add AST2700 support Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927-support_ast2700-v1-3-9f03f29d2c82@aspeedtech.com \
--to=jacky_chou@aspeedtech.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ratbert@faraday-tech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®