[PATCH 5/5] net: ftgmac100: Allow building on ARM64

[Jacky Chou <jacky_chou@aspeedtech.com>]

Allow the Faraday vendor menu and FTGMAC100 driver to be selected on
ARM64 so AST2700 platforms can enable the MAC. The driver now programs
the upper DMA address fields, so it no longer needs to be marked BROKEN
for 64-bit builds.

Keep selecting the Aspeed MDIO controller for MACH_ASPEED_G6 and also
select it for ARCH_ASPEED. This preserves the existing AST2600
dependency while covering newer Aspeed SoCs that use the common ARCH
symbol.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/Kconfig | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index 474073c7f94d..dea6dcfc9ab5 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -6,7 +6,7 @@
 config NET_VENDOR_FARADAY
 	bool "Faraday devices"
 	default y
-	depends on ARM || COMPILE_TEST
+	depends on ARM || ARM64 || COMPILE_TEST
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -28,11 +28,10 @@ config FTMAC100
 
 config FTGMAC100
 	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
-	depends on ARM || COMPILE_TEST
-	depends on !64BIT || BROKEN
+	depends on ARM || ARM64 || COMPILE_TEST
 	select PHYLIB
 	select FIXED_PHY
-	select MDIO_ASPEED if MACH_ASPEED_G6
+	select MDIO_ASPEED if MACH_ASPEED_G6 || ARCH_ASPEED
 	select CRC32
 	help
 	  This driver supports the FTGMAC100 Gigabit Ethernet controller

-- 
2.34.1