From: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghuay@nvidia.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>,
Peter Newman <peternewman@google.com>,
James Morse <james.morse@arm.com>,
Babu Moger <babu.moger@amd.com>,
Drew Fustini <dfustini@baylibre.com>,
Dave Martin <Dave.Martin@arm.com>, Chen Yu <yu.c.chen@intel.com>,
David E Box <david.e.box@intel.com>,
x86@kernel.org
Cc: Christoph Hellwig <hch@infradead.org>,
linux-kernel@vger.kernel.org, patches@lists.linux.dev,
Tony Luck <tony.luck@intel.com>
Subject: [PATCH v13 14/25] arm,x86,fs/resctrl: Use right size for L3 monitor data structures
Date: Mon, 28 Sep 2026 15:14:58 -0700 [thread overview]
Message-ID: <20260928221509.68002-15-tony.luck@intel.com> (raw)
In-Reply-To: <20260928221509.68002-1-tony.luck@intel.com>
The number of RMIDs available for use is computed as the minimum value across
all enabled monitoring resources. This value does not currently change from
one mount to the next. But when changes are made to allow configuration
of the pmt_telemetry driver as a module the Application Energy Telemetry
events will only be enabled if the module is loaded at the point when the
file system is mounted. This may result in the available number of RMIDs
changing from one mount to the next.
The RDT_RESOURCE_L3 allocates some data structures sized by the
number of RMIDs:
* rdt_l3_mon_domain::rmid_busy_llc is a bitmap tracking which RMIDs
have active L3 cache occupancy counts.
* rdt_l3_mon_domain::mbm_states[] tracks memory bandwidth for the
"mba_MBps" software controller.
* rdt_hw_l3_mon_domain::arch_mbm_states[] keeps total count of memory
traffic (handling overflow of hardware counters).
These structures must be allocated and manipulated based on the number
of RMIDs supported by the L3 (this will not change from mount to mount).
The limbo code must be prepared to deal with changes in the number of RMIDs
from one mount to the next because some RMIDs may still be "busy" when the
file system is unmounted, but be above resctrl_arch_system_num_rmid_idx()
for the remount. In this case RMIDs that can be released are not put onto
the rmid_free_lru list.
Use the L3 rdt_resource::mon.num_rmid to allocate and operate on these
data structures.
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
v13:
Drop rename of local "idx_limit" to "l3_idx_limit"
Re-wrote commit message.
---
include/linux/resctrl.h | 7 +++++--
arch/x86/kernel/cpu/resctrl/core.c | 5 +++++
drivers/resctrl/mpam_resctrl.c | 5 +++++
fs/resctrl/monitor.c | 22 ++++++++++++++++++----
fs/resctrl/rdtgroup.c | 2 +-
5 files changed, 34 insertions(+), 7 deletions(-)
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 7afeb3bd55d9..c77e24c0d8b6 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -183,10 +183,12 @@ struct mbm_cntr_cfg {
* struct rdt_l3_mon_domain - group of CPUs sharing RDT_RESOURCE_L3 monitoring
* @hdr: common header for different domain types
* @ci_id: cache info id for this domain
- * @rmid_busy_llc: bitmap of which limbo RMIDs are above threshold
+ * @rmid_busy_llc: bitmap of which limbo RMIDs are above threshold. Sized for
+ * maximum supported RMIDs in L3 resource.
* @mbm_states: Per-event pointer to the MBM event's saved state.
* An MBM event's state is an array of struct mbm_state
* indexed by RMID on x86 or combined CLOSID, RMID on Arm.
+ * Sized same as @rmid_busy_llc.
* @mbm_over: worker to periodically read MBM h/w counters
* @cqm_limbo: worker to periodically read CQM h/w counters
* @mbm_work_cpu: worker CPU for MBM h/w counters
@@ -444,8 +446,9 @@ static inline u32 resctrl_get_default_ctrl(struct rdt_resource *r)
return WARN_ON_ONCE(1);
}
-/* The number of closid supported by this resource regardless of CDP */
+/* The number of closid/rmid supported by this resource regardless of CDP */
u32 resctrl_arch_get_num_closid(struct rdt_resource *r);
+u32 resctrl_arch_get_num_rmid_idx(struct rdt_resource *r);
u32 resctrl_arch_system_num_rmid_idx(void);
u32 resctrl_arch_system_max_rmid_idx(void);
int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid);
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 8702a6da2374..b32fa143283e 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -380,6 +380,11 @@ u32 resctrl_arch_get_num_closid(struct rdt_resource *r)
return resctrl_to_arch_res(r)->num_closid;
}
+u32 resctrl_arch_get_num_rmid_idx(struct rdt_resource *r)
+{
+ return r->mon.num_rmid;
+}
+
void rdt_ctrl_update(void *arg)
{
struct rdt_hw_resource *hw_res;
diff --git a/drivers/resctrl/mpam_resctrl.c b/drivers/resctrl/mpam_resctrl.c
index 52726f7fd03f..360a50eb0cd3 100644
--- a/drivers/resctrl/mpam_resctrl.c
+++ b/drivers/resctrl/mpam_resctrl.c
@@ -252,6 +252,11 @@ u32 resctrl_arch_get_num_closid(struct rdt_resource *ignored)
return mpam_partid_max + 1;
}
+u32 resctrl_arch_get_num_rmid_idx(struct rdt_resource *ignored)
+{
+ return resctrl_arch_system_num_rmid_idx();
+}
+
u32 resctrl_arch_system_num_rmid_idx(void)
{
return (mpam_pmg_max + 1) * (mpam_partid_max + 1);
diff --git a/fs/resctrl/monitor.c b/fs/resctrl/monitor.c
index ccfb1548fea1..1d55f138e2f6 100644
--- a/fs/resctrl/monitor.c
+++ b/fs/resctrl/monitor.c
@@ -120,10 +120,18 @@ static inline struct rmid_entry *__rmid_entry(u32 idx)
static void limbo_release_entry(struct rmid_entry *entry)
{
+ u32 cur_idx_limit = resctrl_arch_system_num_rmid_idx();
+
lockdep_assert_held(&rdtgroup_mutex);
rmid_limbo_count--;
- list_add_tail(&entry->list, &rmid_free_lru);
+
+ /*
+ * Limbo may be freeing an RMID from a previous mount where there
+ * were more RMIDs available.
+ */
+ if (resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid) < cur_idx_limit)
+ list_add_tail(&entry->list, &rmid_free_lru);
if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
closid_num_dirty_rmid[entry->closid]--;
@@ -138,7 +146,7 @@ static void limbo_release_entry(struct rmid_entry *entry)
void __check_limbo(struct rdt_l3_mon_domain *d, bool force_free)
{
struct rdt_resource *r = resctrl_arch_get_resource(RDT_RESOURCE_L3);
- u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+ u32 idx_limit = resctrl_arch_get_num_rmid_idx(r);
struct rmid_entry *entry;
bool rmid_dirty = true;
u32 idx, cur_idx = 1;
@@ -159,6 +167,11 @@ void __check_limbo(struct rdt_l3_mon_domain *d, bool force_free)
* are marked as busy for occupancy < threshold. If the occupancy
* is less than the threshold decrement the busy counter of the
* RMID and move it to the free list when the counter reaches 0.
+ *
+ * RMIDs will keep counts of allocated LLC entries after the resctrl
+ * file system is unmounted. So check all possible RMIDs since a
+ * previous mount cycle may have used more than are available in
+ * this mount cycle.
*/
for (;;) {
idx = find_next_bit(d->rmid_busy_llc, idx_limit, cur_idx);
@@ -202,7 +215,8 @@ void __check_limbo(struct rdt_l3_mon_domain *d, bool force_free)
bool has_busy_rmid(struct rdt_l3_mon_domain *d)
{
- u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+ struct rdt_resource *r = resctrl_arch_get_resource(RDT_RESOURCE_L3);
+ u32 idx_limit = resctrl_arch_get_num_rmid_idx(r);
return find_first_bit(d->rmid_busy_llc, idx_limit) != idx_limit;
}
@@ -1238,7 +1252,7 @@ static void mbm_cntr_free_all(struct rdt_resource *r, struct rdt_l3_mon_domain *
*/
static void resctrl_reset_rmid_all(struct rdt_resource *r, struct rdt_l3_mon_domain *d)
{
- u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+ u32 idx_limit = resctrl_arch_get_num_rmid_idx(r);
enum resctrl_event_id evt;
int idx;
diff --git a/fs/resctrl/rdtgroup.c b/fs/resctrl/rdtgroup.c
index 7cf809380c53..79d4ddc3d64d 100644
--- a/fs/resctrl/rdtgroup.c
+++ b/fs/resctrl/rdtgroup.c
@@ -4619,7 +4619,7 @@ void resctrl_offline_mon_domain(struct rdt_resource *r, struct rdt_domain_hdr *h
*/
static int domain_setup_l3_mon_state(struct rdt_resource *r, struct rdt_l3_mon_domain *d)
{
- u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+ u32 idx_limit = resctrl_arch_get_num_rmid_idx(r);
size_t tsize = sizeof(*d->mbm_states[0]);
enum resctrl_event_id eventid;
int idx;
--
2.55.0
next prev parent reply other threads:[~2026-09-28 22:15 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-28 22:14 [PATCH v13 00/25] Allow AET to use PMT as loadable module Tony Luck
2026-09-28 22:14 ` [PATCH v13 01/25] fs/resctrl: Ensure default group reports tasks on monitor-only systems Tony Luck
2026-09-28 22:14 ` [PATCH v13 02/25] x86/cpufeatures: Add missing CQM feature dependency Tony Luck
2026-09-28 22:14 ` [PATCH v13 03/25] x86/resctrl: Check if monitoring features are supported Tony Luck
2026-09-28 22:14 ` [PATCH v13 04/25] x86/resctrl: Centralize monitoring feature enumeration Tony Luck
2026-09-28 22:14 ` [PATCH v13 05/25] x86/resctrl: Apply Intel MBM quirk from rdt_get_l3_mon_config() Tony Luck
2026-09-28 22:14 ` [PATCH v13 06/25] x86/resctrl: Delete resctrl_cpu_detect() Tony Luck
2026-09-28 22:14 ` [PATCH v13 07/25] arm,x86,fs/resctrl: Replace architecture resctrl_arch_{alloc,mon}_capable() Tony Luck
2026-09-28 22:14 ` [PATCH v13 08/25] x86/resctrl: Update special case for Intel Haswell enumeration Tony Luck
2026-09-28 22:14 ` [PATCH v13 09/25] x86/resctrl: Delete rdt_alloc_capable and rdt_mon_capable Tony Luck
2026-09-28 22:14 ` [PATCH v13 10/25] fs/resctrl: Remove redundant calls to resctrl_mon_capable() Tony Luck
2026-09-28 22:14 ` [PATCH v13 11/25] x86/resctrl: Honor rdt={perf|energy} options to force enable AET events Tony Luck
2026-09-28 22:14 ` [PATCH v13 12/25] fs/resctrl: Add interface to disable a monitor event Tony Luck
2026-09-28 22:14 ` [PATCH v13 13/25] arm,x86,fs/resctrl: Allocate maximum needed rmid_ptrs[] Tony Luck
2026-09-28 22:14 ` Tony Luck [this message]
2026-09-28 22:14 ` [PATCH v13 15/25] x86,fs/resctrl: Handle systems where AET is the only resource Tony Luck
2026-09-28 22:15 ` [PATCH v13 16/25] x86/resctrl: Add PMT registration API for AET enumeration callbacks Tony Luck
2026-09-28 22:15 ` [PATCH v13 17/25] platform/x86/intel/pmt: Register enumeration functions with resctrl Tony Luck
2026-09-28 22:15 ` [PATCH v13 18/25] x86/resctrl: Use registered function pointers for AET enumeration Tony Luck
2026-09-28 22:15 ` [PATCH v13 19/25] arm,x86,fs/resctrl: Enumerate AET on every resctrl mount Tony Luck
2026-09-28 22:15 ` [PATCH v13 20/25] x86/resctrl: Enforce system RMID limit on AET Tony Luck
2026-09-28 22:15 ` [PATCH v13 21/25] x86/resctrl: Export interface to report telemetry unbind/remove Tony Luck
2026-09-28 22:15 ` [PATCH v13 22/25] platform/x86/intel/pmt: Inform resctrl when MMIO maps are being removed Tony Luck
2026-09-28 22:15 ` [PATCH v13 23/25] x86/resctrl: Require 64-bit x86 for resctrl support Tony Luck
2026-09-28 22:15 ` [PATCH v13 24/25] x86/resctrl: Simplify Kconfig options for resctrl Tony Luck
2026-09-28 22:15 ` [PATCH v13 25/25] x86,fs/resctrl: Document telemetry mount timing caveat Tony Luck
2026-09-29 0:29 ` [PATCH v13 00/25] Allow AET to use PMT as loadable module Luck, Tony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260928221509.68002-15-tony.luck@intel.com \
--to=tony.luck@intel.com \
--cc=Dave.Martin@arm.com \
--cc=babu.moger@amd.com \
--cc=david.e.box@intel.com \
--cc=dfustini@baylibre.com \
--cc=fenghuay@nvidia.com \
--cc=hch@infradead.org \
--cc=james.morse@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=reinette.chatre@intel.com \
--cc=x86@kernel.org \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®