[v3 for-next 0/3] block: delay support for error injection

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [v3 for-next 0/3] block: delay support for error injection
@ 2026-09-28 22:16 Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 1/3] block: Reject unknown status tags in error injection rules Md Haris Iqbal
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Md Haris Iqbal @ 2026-09-28 22:16 UTC (permalink / raw)
  To: Jens Axboe, linux-block
  Cc: linux-kernel, Christoph Hellwig, Keith Busch, Jonathan Corbet,
	linux-doc, Md Haris Iqbal

Error injection can only fail a bio today.  This adds a delay_us option so
that a rule can hold a bio back first, to model a slow device.  The delay
happens above the driver, so it tests the code waiting above the block
layer, not the blk-mq timeout handler.

A delayed bio is marked with a new BIO_ERROR_INJECTED flag so the rules
are not applied to it again, even after a split.  Christoph asked on v2
to avoid the flag by allowing a delay only together with an error.  I kept
delay-only rules, as a slow device that succeeds is the more useful case,
so the flag question is still open.

Holding a bio back reorders it against bios submitted later, which breaks
sequential write ordering on zoned devices.

Patch 1 is a prep cleanup.  It moves the rejection of an unknown status
tag into the parser, because patch 2 makes a rule without a status valid.

Tested in a VM.

v1: https://lore.kernel.org/linux-block/20260827000115.128093-1-haris.iqbal@linux.dev/
v2: https://lore.kernel.org/linux-block/20260830012002.80275-1-haris.iqbal@linux.dev/

Changes since v2:

 - Patch 1: return bool, rewrite the commit message.

 - Patch 2: drop __submit_bio_noacct_nocheck(); the flag alone stops the
   rules being applied again.  Log the error when a delayed bio is failed.

 - Patch 3: trim the documentation.

Changes since v1:

 - Add the BIO_ERROR_INJECTED bio flag.  v1 only resubmitted a delayed bio
   below the injection hook, which left the remainder of a split going
   through the hook and matching the same rule again, so a bio was held
   once per split instead of once.

 - Patch 1: tag_to_blk_status() returns an error and passes the status back
   through a pointer, instead of returning BLK_STS_OK for both the "OK" tag
   and an unknown one.  A delay-only rule has no status, so the two have to
   be told apart.

 - Documentation: a delayed bio is held once rather than once per split.

Md Haris Iqbal (3):
  block: Reject unknown status tags in error injection rules
  block: allow error injection rules to delay bios
  Documentation: block: document error injection delay feature

 Documentation/block/error-injection.rst |  39 +++++-
 block/blk-core.c                        |  14 +-
 block/blk.h                             |   2 +-
 block/error-injection.c                 | 167 +++++++++++++++++++++---
 block/error-injection.h                 |   1 +
 include/linux/blk_types.h               |   1 +
 6 files changed, 192 insertions(+), 32 deletions(-)

-- 
2.53.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [v3 for-next 1/3] block: Reject unknown status tags in error injection rules
  2026-09-28 22:16 [v3 for-next 0/3] block: delay support for error injection Md Haris Iqbal
@ 2026-09-28 22:16 ` Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 2/3] block: allow error injection rules to delay bios Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 3/3] Documentation: block: document error injection delay feature Md Haris Iqbal
  2 siblings, 0 replies; 4+ messages in thread
From: Md Haris Iqbal @ 2026-09-28 22:16 UTC (permalink / raw)
  To: Jens Axboe, linux-block
  Cc: linux-kernel, Christoph Hellwig, Keith Busch, Jonathan Corbet,
	linux-doc, Md Haris Iqbal

tag_to_blk_status() returns BLK_STS_OK both for the "OK" tag and for a
tag it does not recognize, so a caller cannot tell the two apart. The
block error injection code (which is the sole user of this function
currently) relies on error_inject_add() later to reject adding a rule with
status=BLK_STS_OK. This is okay for the current state of error injection.

The delay option added in the next commit makes the rule with status=OK
valid, meaning the function tag_to_blk_status() now needs to explicitly
match BLK_STS_OK for it, and fail for a tag it does not recognize. Hence
make tag_to_blk_status() take a second param to update the matched status,
and return true in case of a successful match. If a match is not found,
the function tag_to_blk_status() returns false and *status remains
unchanged.

A repeated status= where an invalid tag comes first is now rejected
instead of being overridden by the later one.

Cc: Christoph Hellwig <hch@lst.de>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Md Haris Iqbal <haris.iqbal@linux.dev>
---
 block/blk-core.c        | 14 ++++++--------
 block/blk.h             |  2 +-
 block/error-injection.c |  7 ++++---
 3 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 13dc70e8f55d..c45846b9c50d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -225,21 +225,19 @@ const char *blk_status_to_tag(blk_status_t status)
 	return blk_errors[idx].tag;
 }
 
-blk_status_t tag_to_blk_status(const char *tag)
+bool tag_to_blk_status(const char *tag, blk_status_t *status)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(blk_errors); i++) {
 		if (blk_errors[i].tag &&
-		    !strcmp(blk_errors[i].tag, tag))
-			return (__force blk_status_t)i;
+		    !strcmp(blk_errors[i].tag, tag)) {
+			*status = (__force blk_status_t)i;
+			return true;
+		}
 	}
 
-	/*
-	 * Return BLK_STS_OK for mismatches as this function is intended to
-	 * parse error status values.
-	 */
-	return BLK_STS_OK;
+	return false;
 }
 
 /**
diff --git a/block/blk.h b/block/blk.h
index 2cc03aa54c53..5fa54162c686 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -52,7 +52,7 @@ void blk_free_flush_queue(struct blk_flush_queue *q);
 
 const char *blk_status_to_str(blk_status_t status);
 const char *blk_status_to_tag(blk_status_t status);
-blk_status_t tag_to_blk_status(const char *tag);
+bool tag_to_blk_status(const char *tag, blk_status_t *status);
 enum req_op str_to_blk_op(const char *op);
 
 bool __blk_mq_unfreeze_queue(struct request_queue *q, bool force_atomic);
diff --git a/block/error-injection.c b/block/error-injection.c
index e14bc4b723ef..db543fe27630 100644
--- a/block/error-injection.c
+++ b/block/error-injection.c
@@ -171,15 +171,16 @@ static int match_op(substring_t *args, enum req_op *op)
 static int match_status(substring_t *args, blk_status_t *status)
 {
 	const char *tag;
+	bool found;
 
 	tag = match_strdup(args);
 	if (!tag)
 		return -ENOMEM;
-	*status = tag_to_blk_status(tag);
-	if (!*status)
+	found = tag_to_blk_status(tag, status);
+	if (!found)
 		pr_warn("invalid status '%s'\n", tag);
 	kfree(tag);
-	return 0;
+	return found ? 0 : -EINVAL;
 }
 
 static ssize_t blk_error_injection_parse_options(struct gendisk *disk,
-- 
2.53.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [v3 for-next 2/3] block: allow error injection rules to delay bios
  2026-09-28 22:16 [v3 for-next 0/3] block: delay support for error injection Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 1/3] block: Reject unknown status tags in error injection rules Md Haris Iqbal
@ 2026-09-28 22:16 ` Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 3/3] Documentation: block: document error injection delay feature Md Haris Iqbal
  2 siblings, 0 replies; 4+ messages in thread
From: Md Haris Iqbal @ 2026-09-28 22:16 UTC (permalink / raw)
  To: Jens Axboe, linux-block
  Cc: linux-kernel, Christoph Hellwig, Keith Busch, Jonathan Corbet,
	linux-doc, Md Haris Iqbal

Error injection can only fail a bio today. Add a delay_us option so that
a rule can hold a bio back first, to model a slow device.

If a matching rule has delay_us set, the bio is held for that long. It is
then failed if the rule also has a status, or resubmitted otherwise.

The resubmission is done through submit_bio_noacct_nocheck(), which is
where the injection hook sits. To avoid the same delay rule being applied
to it again, mark the bio with the BIO_ERROR_INJECTED flag before queueing
the work in blk_error_inject_delay(). This also prevents bios that are
split later and resubmitted from being evaluated for delay (or error
injection) again. __bio_clone() does not propagate the flag, so a clone a
stacking driver aims at a lower device is still evaluated.

The bio is submitted from a workqueue rather than from the timer, because
submitting a bio can sleep. Bios with REQ_NOWAIT are never delayed, and
values above 600 seconds are rejected.

Cc: Christoph Hellwig <hch@lst.de>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Md Haris Iqbal <haris.iqbal@linux.dev>
---
 block/error-injection.c   | 160 ++++++++++++++++++++++++++++++++++----
 block/error-injection.h   |   1 +
 include/linux/blk_types.h |   1 +
 3 files changed, 147 insertions(+), 15 deletions(-)

diff --git a/block/error-injection.c b/block/error-injection.c
index db543fe27630..a35fe41a43e4 100644
--- a/block/error-injection.c
+++ b/block/error-injection.c
@@ -6,9 +6,17 @@
 #include <linux/blkdev.h>
 #include <linux/parser.h>
 #include <linux/seq_file.h>
+#include <linux/workqueue.h>
 #include "blk.h"
 #include "error-injection.h"
 
+/*
+ * Cap the delay so that a typo can't wedge a device for good.  This is still
+ * well beyond the default hung task timeout, which is one of the things a
+ * delay is useful for triggering.
+ */
+#define BLK_ERROR_INJECT_MAX_DELAY_US	(600 * USEC_PER_SEC)
+
 struct blk_error_inject {
 	struct list_head		entry;
 	sector_t			start;
@@ -18,14 +26,104 @@ struct blk_error_inject {
 
 	/* only inject every 1 / chance times */
 	unsigned int			chance;
+
+	/* hold the bio for this long before submitting or failing it */
+	unsigned int			delay_us;
+};
+
+/*
+ * A bio held by a delay rule.  It does not point back at the rule, so rules
+ * can be removed while delayed bios are outstanding.  The submitter holds the
+ * bdev open until the bio completes, so the disk and queue stay allocated.
+ * A delayed bio holds no queue usage counter reference, so it does not hold
+ * up a queue freeze either.
+ */
+struct blk_error_inject_delay {
+	struct delayed_work		dwork;
+	struct bio			*bio;
+	blk_status_t			status;
 };
 
+static struct workqueue_struct *blk_error_inject_wq;
+
 DEFINE_STATIC_KEY_FALSE(blk_error_injection_enabled);
 
+static void blk_error_inject_delay_work(struct work_struct *work)
+{
+	struct blk_error_inject_delay *d = container_of(to_delayed_work(work),
+			struct blk_error_inject_delay, dwork);
+	struct bio *bio = d->bio;
+	struct gendisk *disk = bio->bi_bdev->bd_disk;
+	blk_status_t status = d->status;
+
+	kfree(d);
+
+	if (status != BLK_STS_OK) {
+		pr_info_ratelimited("%pg: injecting %s error for %s at sector %llu:%u\n",
+				disk->part0, blk_status_to_str(status),
+				blk_op_str(bio_op(bio)), bio->bi_iter.bi_sector,
+				bio_sectors(bio));
+		bio->bi_status = status;
+		bio_endio(bio);
+	} else {
+		/*
+		 * Resubmit.  The BIO_ERROR_INJECTED flag ensures that a bio
+		 * that was delayed once skips error injection entirely from
+		 * here on, including any other rule that covers it.
+		 */
+		submit_bio_noacct_nocheck(bio, false);
+	}
+}
+
+/*
+ * Hand the bio to a workqueue that submits or fails it once the delay has
+ * expired.  Both blk_mq_submit_bio() and ->submit_bio can sleep, so this can't
+ * be completed from the timer itself.
+ *
+ * Returns false if the bio can't be delayed, in which case the caller handles
+ * it immediately instead.
+ */
+static bool blk_error_inject_delay(struct gendisk *disk, struct bio *bio,
+		blk_status_t status, unsigned int delay_us)
+{
+	struct blk_error_inject_delay *d;
+
+	/* never block a bio that asked not to be blocked */
+	if (bio->bi_opf & REQ_NOWAIT)
+		return false;
+
+	d = kmalloc_obj(*d, GFP_NOIO);
+	if (!d)
+		return false;
+
+	pr_info_ratelimited("%pg: delaying %s at sector %llu:%u by %uus\n",
+			disk->part0, blk_op_str(bio_op(bio)),
+			bio->bi_iter.bi_sector, bio_sectors(bio), delay_us);
+
+	d->bio = bio;
+	d->status = status;
+	INIT_DELAYED_WORK(&d->dwork, blk_error_inject_delay_work);
+
+	/*
+	 * Mark the bio before queueing the work, which can complete it as soon
+	 * as it is queued.  Splitting happens below the injection hook, but
+	 * bio_submit_split_bioset() resubmits the remainder through the hook
+	 * again, and as bio_split() only advances the original bio that
+	 * remainder still matches the same rule.  Without this a bio would be
+	 * delayed once per split.
+	 */
+	bio_set_flag(bio, BIO_ERROR_INJECTED);
+	queue_delayed_work(blk_error_inject_wq, &d->dwork,
+			usecs_to_jiffies(delay_us));
+	return true;
+}
+
 bool __blk_error_inject(struct bio *bio)
 {
 	struct gendisk *disk = bio->bi_bdev->bd_disk;
 	struct blk_error_inject *inj;
+	blk_status_t status = BLK_STS_OK;
+	unsigned int delay_us = 0;
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(inj, &disk->error_injection_list, entry) {
@@ -45,29 +143,38 @@ bool __blk_error_inject(struct bio *bio)
 		if (inj->chance > 1 && (get_random_u32() % inj->chance) != 0)
 			continue;
 
-		pr_info_ratelimited("%pg: injecting %s error for %s at sector %llu:%u\n",
-				disk->part0, blk_status_to_str(inj->status),
-				blk_op_str(inj->op), bio->bi_iter.bi_sector,
-				bio_sectors(bio));
-		bio->bi_status = inj->status;
-		rcu_read_unlock();
-		bio_endio(bio);
-		return true;
+		status = inj->status;
+		delay_us = inj->delay_us;
+		break;
 	}
 	rcu_read_unlock();
-	return false;
+
+	if (delay_us && blk_error_inject_delay(disk, bio, status, delay_us))
+		return true;
+	if (status == BLK_STS_OK)
+		return false;
+
+	pr_info_ratelimited("%pg: injecting %s error for %s at sector %llu:%u\n",
+			disk->part0, blk_status_to_str(status),
+			blk_op_str(bio_op(bio)), bio->bi_iter.bi_sector,
+			bio_sectors(bio));
+	bio->bi_status = status;
+	bio_endio(bio);
+	return true;
 }
 
 static int error_inject_add(struct gendisk *disk, enum req_op op,
 		sector_t start, u64 nr_sectors, blk_status_t status,
-		unsigned int chance)
+		unsigned int chance, unsigned int delay_us)
 {
 	struct blk_error_inject *inj;
 	int error = -EINVAL;
 
 	if (op == REQ_OP_LAST)
 		return -EINVAL;
-	if (status == BLK_STS_OK)
+	if (status == BLK_STS_OK && !delay_us)
+		return -EINVAL;
+	if (delay_us > BLK_ERROR_INJECT_MAX_DELAY_US)
 		return -EINVAL;
 
 	inj = kzalloc_obj(*inj);
@@ -86,6 +193,7 @@ static int error_inject_add(struct gendisk *disk, enum req_op op,
 	inj->start = start;
 	inj->status = status;
 	inj->chance = chance;
+	inj->delay_us = delay_us;
 
 	pr_debug_ratelimited("%pg: adding %s injection for %s at sector %llu:%llu\n",
 			disk->part0, blk_status_to_str(status),
@@ -139,6 +247,7 @@ enum options {
 	Opt_nr_sectors		= (1u << 18),
 	Opt_status		= (1u << 19),
 	Opt_chance		= (1u << 20),
+	Opt_delay_us		= (1u << 21),
 
 	Opt_invalid,
 };
@@ -151,6 +260,7 @@ static const match_table_t opt_tokens = {
 	{ Opt_nr_sectors,		"nr_sectors=%u"		},
 	{ Opt_status,			"status=%s"		},
 	{ Opt_chance,			"chance=%u"		},
+	{ Opt_delay_us,			"delay_us=%u"		},
 	{ Opt_invalid,			NULL,			},
 };
 
@@ -187,7 +297,7 @@ static ssize_t blk_error_injection_parse_options(struct gendisk *disk,
 		char *options)
 {
 	enum { Unset, Add, Removeall } action = Unset;
-	unsigned int option_mask = 0, chance = 1;
+	unsigned int option_mask = 0, chance = 1, delay_us = 0;
 	enum req_op op = REQ_OP_LAST;
 	u64 start = 0, nr_sectors = 0;
 	blk_status_t status = BLK_STS_OK;
@@ -230,6 +340,9 @@ static ssize_t blk_error_injection_parse_options(struct gendisk *disk,
 			if (!error && chance == 0)
 				error = -EINVAL;
 			break;
+		case Opt_delay_us:
+			error = match_uint(args, &delay_us);
+			break;
 		default:
 			pr_warn("unknown parameter or missing value '%s'\n", p);
 			error = -EINVAL;
@@ -241,7 +354,7 @@ static ssize_t blk_error_injection_parse_options(struct gendisk *disk,
 	switch (action) {
 	case Add:
 		return error_inject_add(disk, op, start, nr_sectors, status,
-				chance);
+				chance, delay_us);
 	case Removeall:
 		if (option_mask & ~Opt_removeall)
 			return -EINVAL;
@@ -277,10 +390,11 @@ static int blk_error_injection_show(struct seq_file *s, void *private)
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(inj, &disk->error_injection_list, entry) {
-		seq_printf(s, "%llu:%llu op=%s,status=%s,chance=%u",
+		seq_printf(s, "%llu:%llu op=%s,status=%s,chance=%u,delay_us=%u",
 			   inj->start, inj->end,
 			   blk_op_str(inj->op),
-			   blk_status_to_tag(inj->status), inj->chance);
+			   blk_status_to_tag(inj->status), inj->chance,
+			   inj->delay_us);
 		seq_putc(s, '\n');
 	}
 	rcu_read_unlock();
@@ -315,3 +429,19 @@ void blk_error_injection_exit(struct gendisk *disk)
 {
 	error_inject_removeall(disk);
 }
+
+static int __init blk_error_injection_init_wq(void)
+{
+	/*
+	 * WQ_MEM_RECLAIM so that a delayed bio on the reclaim path can still
+	 * find a worker under memory pressure.  Note that this only guarantees
+	 * a worker exists, not that it is free: submitting a bio can block on
+	 * a queue freeze or on tag allocation, so a delayed bio can still be
+	 * held up behind another one.
+	 */
+	blk_error_inject_wq = alloc_workqueue("blk_error_inject", WQ_MEM_RECLAIM | WQ_UNBOUND, 0);
+	if (!blk_error_inject_wq)
+		panic("Failed to create blk_error_inject wq\n");
+	return 0;
+}
+subsys_initcall(blk_error_injection_init_wq);
diff --git a/block/error-injection.h b/block/error-injection.h
index 9821d773abab..8b3809d85e83 100644
--- a/block/error-injection.h
+++ b/block/error-injection.h
@@ -13,6 +13,7 @@ static inline bool blk_error_inject(struct bio *bio)
 {
 	if (IS_ENABLED(CONFIG_BLK_ERROR_INJECTION) &&
 	    static_branch_unlikely(&blk_error_injection_enabled) &&
+	    !bio_flagged(bio, BIO_ERROR_INJECTED) &&
 	    test_bit(GD_ERROR_INJECT, &bio->bi_bdev->bd_disk->state))
 		return __blk_error_inject(bio);
 	return false;
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 98e21b4cbf32..50e28dc0f1f9 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -323,6 +323,7 @@ enum {
 	BIO_ZONE_WRITE_PLUGGING, /* bio handled through zone write plugging */
 	BIO_EMULATES_ZONE_APPEND, /* bio emulates a zone append operation */
 	BIO_COMPLETE_IN_TASK, /* complete bi_end_io() in task context */
+	BIO_ERROR_INJECTED, /* error injection rules already applied */
 	BIO_FLAG_LAST
 };
 
-- 
2.53.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [v3 for-next 3/3] Documentation: block: document error injection delay feature
  2026-09-28 22:16 [v3 for-next 0/3] block: delay support for error injection Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 1/3] block: Reject unknown status tags in error injection rules Md Haris Iqbal
  2026-09-28 22:16 ` [v3 for-next 2/3] block: allow error injection rules to delay bios Md Haris Iqbal
@ 2026-09-28 22:16 ` Md Haris Iqbal
  2 siblings, 0 replies; 4+ messages in thread
From: Md Haris Iqbal @ 2026-09-28 22:16 UTC (permalink / raw)
  To: Jens Axboe, linux-block
  Cc: linux-kernel, Christoph Hellwig, Keith Busch, Jonathan Corbet,
	linux-doc, Md Haris Iqbal

Document the delay_us option: the delay happens above the driver, a
delayed bio is not run through the rules again, and holding a bio back
reorders it against bios submitted later.

Cc: Christoph Hellwig <hch@lst.de>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Md Haris Iqbal <haris.iqbal@linux.dev>
---
 Documentation/block/error-injection.rst | 39 +++++++++++++++++++++----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/Documentation/block/error-injection.rst b/Documentation/block/error-injection.rst
index 81f31af82e65..6f7609b91d24 100644
--- a/Documentation/block/error-injection.rst
+++ b/Documentation/block/error-injection.rst
@@ -7,9 +7,9 @@ Configurable Error Injection
 Overview
 --------
 
-Configurable error injection allows injecting specific block layer status codes
-for sector ranges of a block device.  Errors can be injected unconditionally, or
-with a given probability.
+Configurable error injection allows injecting delays and/or specific block
+layer status codes for sector ranges of a block device by adding rules.  The
+rules can be configured to trigger unconditionally, or with a given probability.
 
 To use configurable error injection, CONFIG_BLK_ERROR_INJECTION must be enabled.
 
@@ -34,15 +34,36 @@ op=<string>		block layer operation this rule applies to.  This uses
 			the XYZ for each REQ_OP_XYZ operation, e.g. READ, WRITE
 			or DISCARD. Mandatory.
 status=<string>		Status to return.  This uses XYZ for each BLK_STS_XYZ
-			code, e.g. IOERR or MEDIUM. Mandatory.
+			code, e.g. IOERR or MEDIUM.  Mandatory unless delay_us
+			is given.
 start=<number>		First block layer sector the rule applies to.
 			Optional, defaults to 0.
 nr_sectors=<number>	Number of sectors this rule applies.
 			Optional, defaults to the remainder of the device.
-chance=<number>		Only return a failure with a likelihood of 1/chance.
+chance=<number>		Only apply the rule with a likelihood of 1/chance.
 			Optional, defaults to 1 (always).
+delay_us=<number>	Hold the bio back for this many microseconds.  Without
+			status the bio is then submitted to the device as
+			usual.  With status it is failed once the delay has
+			expired.  Bios with REQ_NOWAIT set are never delayed.
+			Optional, defaults to 0 (no delay).  Values above 600
+			seconds are rejected.
 ===================	=======================================================
 
+Delays
+------
+
+A delayed bio is held above the driver, so the device never sees a slow I/O.
+A delay does not reach the blk-mq timeout handler or SCSI error handling.
+
+A bio that matched a delay rule is not evaluated against the rules again, even
+after it is split and resubmitted internally.  Removing a rule does not release
+bios it is already delaying.
+
+Holding a bio back reorders it against bios submitted later.  On zoned devices
+this breaks sequential write ordering and the block layer fails the
+out-of-order writes, so only delay reads there.
+
 Example
 -------
 
@@ -54,6 +75,14 @@ Return BLK_STS_MEDIUM for every write to /dev/nvme0n1:
 
 	$ echo 'add,op=WRITE,start=0,status=MEDIUM' > /sys/kernel/debug/block/nvme0n1/error_injection
 
+Delay every read of /dev/nvme0n1 by 10 milliseconds, then issue it normally:
+
+	$ echo 'add,op=READ,delay_us=10000' > /sys/kernel/debug/block/nvme0n1/error_injection
+
+Fail one in 100 writes with BLK_STS_TIMEOUT, but only after 30 seconds:
+
+	$ echo 'add,op=WRITE,status=TIMEOUT,chance=100,delay_us=30000000' > /sys/kernel/debug/block/nvme0n1/error_injection
+
 Remove all rules for /dev/nvme0n1:
 
 	$ echo 'removeall' > /sys/kernel/debug/block/nvme0n1/error_injection
-- 
2.53.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2026-09-28 22:17 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-28 22:16 [v3 for-next 0/3] block: delay support for error injection Md Haris Iqbal
2026-09-28 22:16 ` [v3 for-next 1/3] block: Reject unknown status tags in error injection rules Md Haris Iqbal
2026-09-28 22:16 ` [v3 for-next 2/3] block: allow error injection rules to delay bios Md Haris Iqbal
2026-09-28 22:16 ` [v3 for-next 3/3] Documentation: block: document error injection delay feature Md Haris Iqbal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®