From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Marcos Paulo de Souza <mpdesouza@suse.com>,
Chris Down <chris@chrisdown.name>,
Naveen Kumar Chaudhary <naveen.osdev@gmail.com>,
linux-kernel@vger.kernel.org, Petr Mladek <pmladek@suse.com>
Subject: [PATCH v5 00/16] printk: Clean up preferred console handling
Date: Tue, 29 Sep 2026 14:05:30 +0200 [thread overview]
Message-ID: <20260929120546.328616-1-pmladek@suse.com> (raw)
Hi,
this patchset does some clean up of the code for handling preferred
consoles in the console registration code.
It is a prerequisite for Marcos' clean up of CON_ENABLE
flag handling. It should prevent regressions caused by the
hidden effects of try_enable_preferred_console(), for example,
see https://lore.kernel.org/r/89409a0f48e6998ff6dd2245691b9954f0e1e435.camel@suse.com
Also I am working on a feature which would allow to explicitly
enable/prefer consoles proposed by SPCR, device tree, or
platform-specific code using a generic "console=platform".
This clean up is a prerequisite, see
https://github.com/pmladek/linux/tree/console-platform-poc1-iter9
Note: I split the 4th patch => should be easier for review than v4 ;-) /o\
Important: An extra fix is needed to get the Braille console
working on a serial port using NBCON API, see
https://lore.kernel.org/r/20260922072558.98854-1-pmladek@suse.com
https://lore.kernel.org/r/20260925141729.173943-1-pmladek@suse.com
Changes against [v4]:
+ Removed 1st patch from v4. Already in upstream.
+ Cleanup _braille_(un)register_console() wrappers already in 3rd
patch. is_braille_console_preferred() will be needed sooner.
+ Split 4th patch. Start with reshufling the add_preferred_console()
code without any functional changes. Add the various checks
and behavior changes one by one is a followup patches.
+ Rework the code to make it clear when it is a new entry or an update.
+ Put back braille_set_options() which just updates the optional
entry. The logic when the value should get updated is the same
as for pc->options.
+ Make sure that options can be overridden by the command line.
+ Add preferred_dev_node to remember the ordering of preferred consoles.
Use it when the last one becomes Braille. The previous version tried to
remembered just the last preferred console. But the logic because
pretty complicated when I tried to make it error proof. AI was
able to find many scenarios where it broke. The list is
the ultimate solution and is easier in the end.
+ Use console_call_setup() in braille_register_console() instead
of duplicating the code [John]
Changes against [v3]:
+ Move the handling of pre-enabled consoles into register_console()
as 1st patch. It prevents a possible invalid access. [Petr]
+ Move the code for handling pre-enabled to console to
try_enable_console() in 7th patch. The resulting code
is the same as in v3.
This 2nd move was not needed in v3 because the code
was moved to this final location later. [Petr]
+ Switch order of the 10th and 11th patch. Aka make
try_enable_default_console() return an err before
refactoring try_enable_console() call
try_enable_preferred_console() only when there is any.
[Petr]
+ Initialize err value in try_enable_console() in 11th patch.
It prevents using a non-initialized variable. [AI:gemini-3]
+ Make sure that pre-enabled consoles won't get registered
when something went wrong in try_enable_console()
in 11th patch [Petr]
Changes against [v2]:
+ Move static_assert() after declaration (1st patch) [Steven]
+ Rename update_preferred_console() to add_or_update_preferred_console() [John]
+ WARN_ON() when called without "name" and "devname" [John]
+ print error when reached MAX_PREFERRED_CONSOLES
+ Add comment above code adding new entries [John]
(all in 4th patch)
+ Call console->setup() under console_lock() in braille_register_console()
(new patch) [Sashiko]
+ Use "No functional changes." phrase in commit messages. [Steven]
+ Call try_enable_preferred_console() only when there is no
preferred console (reworked and split 9th patch) [Petr]
+ Added taken Reviewed-by and Acked-by tags [John, Macros]
Changes against [v1]:
+ Fix stale comment (1st patch, Chris)
+ Add comment descibing update_preferred_console() behavior (3rd patch, John)
+ Better describe behavior changes caused by update_preferred_console()
in the commit message (3rd patch, Chris)
+ Use unsigned int for iterating/indexing preferred_consoles[]
table (3rd patch, John)
+ Add a check preventing an update via "devname" is already assigned
to a real "name". (3rd patch, Petr)
+ Use only Braille entries when trying to enable Braille console (Chris)
+ Split all try_enable_*console() calls into new try_enable_console()
and return early when try_enable_braille_console() succeeded.
Note that we do not longer need to initialize "err" variable
in this case. (new 5th patch, Chris, Petr)
+ Put back the explicit check of CON_BRL flag in register_console()
so that it returns prelimitary only when the driver is used in Braille
mode. (6th patch, Chris, Petr)
+ Add comments explaining that try_enable_braille_console() might succeeded
also when newcon->match() succeeded. In this case, the Braille mode can't
be used because the console device was already used as an early console.[*]
(6th patch, Chris, Petr)
+ Reset preferred_dev_console_prev when used to revert the value.
(7th patch, John)
+ Add Acked-by and Reviewed-by tags (1st, 2nd, 4th patch, Chris, Marcos)
[v1] https://lore.kernel.org/r/20260206165002.496724-1-pmladek@suse.com
[v2] https://lore.kernel.org/r/20260423130015.85175-1-pmladek@suse.com
[v3] https://lore.kernel.org/r/20260602085312.228251-1-pmladek@suse.com
[v4] https://lore.kernel.org/r/20260604101459.393162-1-pmladek@suse.com
Petr Mladek (16):
printk: Rename struct console_cmdline to preferred_console
printk: Rename preferred_console to preferred_dev_console
printk: Cleanup _braille_(un)register_console() wrappers
printk: Separate code for adding/updating preferred console metadata
printk: Prefer the console either via name or devname exclusively
printk: Check that index is not defined when a console is preferred
via devname
printk: Ensure consistent name and devname when updating preferred
console
printk: Do not quietly ignore adding entry for a preferred console
when there is no space
printk: Allow to override options via the command line
printk: Allow to debug misuse of add_or_update_preferred_console()
console/braille: Lock console->setup() call during the registration
printk: Separate code for enabling console
printk: Try to register each console as Braille first
printk: Do not set Braille console as preferred_console
printk: Modify try_enable_default_console() to return error/success
printk: Try enable preferred consoles only when there are any
.../accessibility/braille/braille_console.c | 17 +-
include/linux/console.h | 1 +
kernel/printk/braille.c | 20 +-
kernel/printk/braille.h | 22 +-
.../{console_cmdline.h => console_register.h} | 9 +-
kernel/printk/printk.c | 414 ++++++++++++------
6 files changed, 326 insertions(+), 157 deletions(-)
rename kernel/printk/{console_cmdline.h => console_register.h} (74%)
--
2.55.0
next reply other threads:[~2026-09-29 12:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 12:05 Petr Mladek [this message]
2026-09-29 12:05 ` [PATCH v5 01/16] printk: Rename struct console_cmdline to preferred_console Petr Mladek
2026-09-29 12:05 ` [PATCH v5 02/16] printk: Rename preferred_console to preferred_dev_console Petr Mladek
2026-09-29 12:05 ` [PATCH v5 03/16] printk: Cleanup _braille_(un)register_console() wrappers Petr Mladek
2026-09-29 12:05 ` [PATCH v5 04/16] printk: Separate code for adding/updating preferred console metadata Petr Mladek
2026-09-29 12:05 ` [PATCH v5 05/16] printk: Prefer the console either via name or devname exclusively Petr Mladek
2026-09-29 12:05 ` [PATCH v5 06/16] printk: Check that index is not defined when a console is preferred via devname Petr Mladek
2026-09-29 12:05 ` [PATCH v5 07/16] printk: Ensure consistent name and devname when updating preferred console Petr Mladek
2026-09-29 12:05 ` [PATCH v5 08/16] printk: Do not quietly ignore adding entry for a preferred console when there is no space Petr Mladek
2026-09-29 12:05 ` [PATCH v5 09/16] printk: Allow to override options via the command line Petr Mladek
2026-09-29 12:05 ` [PATCH v5 10/16] printk: Allow to debug misuse of add_or_update_preferred_console() Petr Mladek
2026-09-29 12:05 ` [PATCH v5 11/16] console/braille: Lock console->setup() call during the registration Petr Mladek
2026-09-29 12:05 ` [PATCH v5 12/16] printk: Separate code for enabling console Petr Mladek
2026-09-29 12:05 ` [PATCH v5 13/16] printk: Try to register each console as Braille first Petr Mladek
2026-09-29 12:05 ` [PATCH v5 14/16] printk: Do not set Braille console as preferred_console Petr Mladek
2026-09-29 12:05 ` [PATCH v5 15/16] printk: Modify try_enable_default_console() to return error/success Petr Mladek
2026-09-29 12:05 ` [PATCH v5 16/16] printk: Try enable preferred consoles only when there are any Petr Mladek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260929120546.328616-1-pmladek@suse.com \
--to=pmladek@suse.com \
--cc=chris@chrisdown.name \
--cc=john.ogness@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mpdesouza@suse.com \
--cc=naveen.osdev@gmail.com \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®