From: Primoz Fiser <primoz.fiser@norik.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de
Subject: [PATCH 0/4] ARM: dts: imx6: phycore-som: PMIC and PHY fixes
Date: Wed, 30 Sep 2026 12:25:28 +0200 [thread overview]
Message-ID: <20260930102532.2262700-1-primoz.fiser@norik.com> (raw)
A few small fixes for the PHYTEC phyCORE-i.MX6 SOM:
- Pin the DA9062 PMIC watchdog to /dev/watchdog0 (1/4).
- Raise the PMIC's SOC/ARM buck ceiling to 1.5V, needed once the
1.2GHz OPP tier ([1]] requests 1.3V for VDD_ARM and the anatop
LDO's 125mV dropout is added on top (2/4).
- Migrate the Ethernet PHY reset off the deprecated fsl,fec.yaml
phy-reset-gpios property onto the generic ethernet-phy.yaml
reset-gpios/reset-assert-us binding (3/4, 4/4).
[1] https://lore.kernel.org/all/20260923070505.494949-1-primoz.fiser@norik.com/
Primoz Fiser (4):
ARM: dts: imx6: phycore-som: Set PMIC watchdog alias as default
ARM: dts: imx6: phycore-som: Increase PMIC max SOC and ARM voltage
ARM: dts: imx6: phycore-som: Convert to generic PHY reset binding
ARM: dts: imx6: phycore-som: Add reset-assert-us for PHY reset
.../boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--
2.34.1
next reply other threads:[~2026-09-30 10:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-30 10:25 Primoz Fiser [this message]
2026-09-30 10:25 ` [PATCH 1/4] ARM: dts: imx6: phycore-som: Set PMIC watchdog alias as default Primoz Fiser
2026-09-30 10:25 ` [PATCH 2/4] ARM: dts: imx6: phycore-som: Increase PMIC max SOC and ARM voltage Primoz Fiser
2026-09-30 10:25 ` [PATCH 3/4] ARM: dts: imx6: phycore-som: Convert to generic PHY reset binding Primoz Fiser
2026-09-30 15:50 ` Frank Li
2026-10-01 6:00 ` Primoz Fiser
2026-09-30 10:25 ` [PATCH 4/4] ARM: dts: imx6: phycore-som: Add reset-assert-us for PHY reset Primoz Fiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260930102532.2262700-1-primoz.fiser@norik.com \
--to=primoz.fiser@norik.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=upstream@lists.phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®