[PATCH 1/2] ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals

[Primoz Fiser <primoz.fiser@norik.com>]

The current imx6dl-phytec-mira-rdk-nand.dts describes the LC (Low Cost)
variant of the board. However all phyBOARD-Mira boards in-tree are
actually the FF (Full Featured) variants. Now, sync the i.MX6 DL NAND
variant device-tree and enable all peripherals (CAN, PCIe and no speed
limit on Ethernet PHY) to enable all RDK board features.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
 arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
index 8ec27080ca1e..c2780ecb5936 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
@@ -22,8 +22,8 @@ chosen {
 	};
 };
 
-&ethphy {
-	max-speed = <100>;
+&can1 {
+	status = "okay";
 };
 
 &fec {
@@ -50,6 +50,10 @@ &i2c_rtc {
 	status = "okay";
 };
 
+&pcie {
+	status = "okay";
+};
+
 &uart3 {
 	status = "okay";
 };
-- 
2.34.1