From: Primoz Fiser <primoz.fiser@norik.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de
Subject: [PATCH 0/2] ARM: dts: imx6: phytec-mira: phyBOARD-Mira fixes
Date: Wed, 30 Sep 2026 12:34:23 +0200 [thread overview]
Message-ID: <20260930103425.2315286-1-primoz.fiser@norik.com> (raw)
Two small fixes for the PHYTEC phyBOARD-Mira-i.MX6 boards:
- The i.MX6DL NAND variant was still described as the LC (Low Cost)
board, missing CAN/PCIe and capped at 100Mbps Ethernet, while every
other in-tree phyBOARD-Mira .dts is the FF (Full Featured) variant.
Sync it to match its siblings (1/2).
- Since commit 888e5fad9b78 ("Input: stmpe - add axis inversion and
swapping capability") landed, the touchscreen axis inversion these
boards need can be described in devicetree instead of userspace (2/2).
Primoz Fiser (2):
ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals
ARM: dts: imx6qdl-phytec-mira: Add touchscreen-inverted properties
arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts | 8 ++++++--
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
--
2.34.1
next reply other threads:[~2026-09-30 10:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-30 10:34 Primoz Fiser [this message]
2026-09-30 10:34 ` [PATCH 1/2] ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals Primoz Fiser
2026-09-30 10:34 ` [PATCH 2/2] ARM: dts: imx6qdl-phytec-mira: Add touchscreen-inverted properties Primoz Fiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260930103425.2315286-1-primoz.fiser@norik.com \
--to=primoz.fiser@norik.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=upstream@lists.phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®