* [PATCH net-next v2] selftests: fib_tests: use per-test return value in subtests
@ 2026-09-30 2:06 Hangbin Liu
2026-09-30 14:08 ` Ido Schimmel
0 siblings, 1 reply; 2+ messages in thread
From: Hangbin Liu @ 2026-09-30 2:06 UTC (permalink / raw)
To: David Ahern, Ido Schimmel, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Simon Horman, Shuah Khan
Cc: Hangbin Liu, Ido Schimmel, David Ahern, netdev, linux-kselftest,
linux-kernel, Hangbin Liu
From: Hangbin Liu <liuhangbin@kylinos.cn>
fib_tests mixes use of $ret for both per-test return value and global exit
code. If an earlier subtest fails and a later function sets ret=0, the
script will exit with status 0 even though [FAIL] lines were printed.
Use RET as the per-test return value, as already defined in lib.sh. The
exit code ret will only be set in log_test().
Signed-off-by: Hangbin Liu <liuhangbin@kylinos.cn>
---
Changes in v2:
- target to net-next since this doesn't fix a regression (Ido Schimmel)
- remove RET in fib_carrier_unicast_test which is not used (Ido Schimmel)
- Link to v1: https://lore.kernel.org/r/20260929-self_fib_tests-v1-1-0eab6a3c3a3c@kylinos.cn
---
tools/testing/selftests/net/fib_tests.sh | 40 +++++++++++++++-----------------
1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index b338bfb196a2..47184d201d33 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -369,8 +369,6 @@ fib_carrier_local_test()
fib_carrier_unicast_test()
{
- ret=0
-
echo
echo "Single path route carrier test"
@@ -685,12 +683,12 @@ fib6_notify_test()
err=`cat errors.txt |grep "Message too long"`
if [ -z "$err" ];then
- ret=0
+ RET=0
else
- ret=1
+ RET=1
fi
- log_test $ret 0 "ipv6 route add notify"
+ log_test "$RET" 0 "ipv6 route add notify"
kill_process %%
@@ -732,12 +730,12 @@ fib_notify_test()
err=`cat errors.txt |grep "Message too long"`
if [ -z "$err" ];then
- ret=0
+ RET=0
else
- ret=1
+ RET=1
fi
- log_test $ret 0 "ipv4 route add notify"
+ log_test "$RET" 0 "ipv4 route add notify"
kill_process %%
@@ -763,9 +761,9 @@ check_rt_num()
if [ $num -ne $expected ]; then
echo "FAIL: Expected $expected routes, got $num"
- ret=1
+ RET=1
else
- ret=0
+ RET=0
fi
}
@@ -812,7 +810,7 @@ fib6_gc_test()
sleep $GC_WAIT_TIME
$NS_EXEC sysctl -wq net.ipv6.route.flush=1
check_rt_num 0 $($IP -6 route list |grep expires|wc -l)
- log_test $ret 0 "ipv6 route garbage collection"
+ log_test "$RET" 0 "ipv6 route garbage collection"
reset_dummy_10
@@ -830,7 +828,7 @@ fib6_gc_test()
# Wait for GC
sleep $GC_WAIT_TIME
check_rt_num 0 $($IP -6 route list |grep expires|wc -l)
- log_test $ret 0 "ipv6 route garbage collection (with permanent routes)"
+ log_test "$RET" 0 "ipv6 route garbage collection (with permanent routes)"
reset_dummy_10
@@ -848,7 +846,7 @@ fib6_gc_test()
# Wait for GC
sleep $GC_WAIT_TIME
check_rt_num 0 $($IP -6 route list |grep expires|wc -l)
- log_test $ret 0 "ipv6 route garbage collection (replace with expires)"
+ log_test "$RET" 0 "ipv6 route garbage collection (replace with expires)"
reset_dummy_10
@@ -868,7 +866,7 @@ fib6_gc_test()
# Wait for GC
sleep $GC_WAIT_TIME
check_rt_num 5 $($IP -6 route list |grep -v expires|grep 2001:20::|wc -l)
- log_test $ret 0 "ipv6 route garbage collection (replace with permanent)"
+ log_test "$RET" 0 "ipv6 route garbage collection (replace with permanent)"
# Delete dummy_10 and remove all routes
$IP link del dev dummy_10
@@ -923,7 +921,7 @@ fib6_gc_test()
# rt6_nh_dump_exceptions() just skips expired exceptions.
$NS_EXEC sysctl -wq net.ipv6.route.flush=1
check_rt_num 0 $($IP -6 route list cache | grep 2001:10:: | wc -l)
- log_test $ret 0 "ipv6 route garbage collection (promote to permanent routes)"
+ log_test "$RET" 0 "ipv6 route garbage collection (promote to permanent routes)"
$IP neigh del fe80:dead::3 lladdr 00:11:22:33:44:55 dev veth1 router
$IP link del veth1
@@ -960,7 +958,7 @@ fib6_gc_test()
# Wait for GC
sleep $GC_WAIT_TIME
check_rt_num 0 $($IP -6 route list |grep expires|wc -l)
- log_test $ret 0 "ipv6 route garbage collection (RA message)"
+ log_test "$RET" 0 "ipv6 route garbage collection (RA message)"
set +e
@@ -1589,7 +1587,7 @@ fib6_ra_to_static()
# Expire is back, on-link route is now owned by RA again
check_rt_num 2 $($IP -6 route list |grep expires|wc -l)
- log_test $ret 0 "ipv6 promote RA route to static"
+ log_test "$RET" 0 "ipv6 promote RA route to static"
# Prepare for RA route with gateway
$NS_EXEC sysctl -wq net.ipv6.conf.veth1.accept_ra_rt_info_max_plen=64
@@ -1606,7 +1604,7 @@ fib6_ra_to_static()
check_rt_num 2 "$($IP -6 route list | grep -c "nexthop via")"
- log_test "$ret" 0 "ipv6 RA route with nexthop do not merge into ECMP with static"
+ log_test "$RET" 0 "ipv6 RA route with nexthop do not merge into ECMP with static"
set +e
@@ -1651,18 +1649,18 @@ fib6_temp_addr_renewal() {
# Restore it
$NS_EXEC ra6 -i veth2 -s fe80::1 -d ff02::1 -P 2001:12::/64\#LA\#3600\#3600 -e
- ret=1
+ RET=1
for i in $(seq 1 25); do
sleep 1
num_dep="$($IP -6 addr | grep -c "temporary deprecated" || true)"
num_tot="$($IP -6 addr | grep -c "temporary" || true)"
if [ "$num_dep" -eq 1 ] && [ "$num_tot" -ge 2 ]; then
- ret=0
+ RET=0
break
fi
done
- log_test "$ret" 0 "IPv6 temporary address cleanly deprecated and regenerated"
+ log_test "$RET" 0 "IPv6 temporary address cleanly deprecated and regenerated"
set +e
---
base-commit: 8c2493eef43ab8592738a5398c74af268c0fefdf
change-id: 20260928-self_fib_tests-0d05f96eafbb
Best regards,
--
Hangbin Liu <liuhangbin@kylinos.cn>
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH net-next v2] selftests: fib_tests: use per-test return value in subtests
2026-09-30 2:06 [PATCH net-next v2] selftests: fib_tests: use per-test return value in subtests Hangbin Liu
@ 2026-09-30 14:08 ` Ido Schimmel
0 siblings, 0 replies; 2+ messages in thread
From: Ido Schimmel @ 2026-09-30 14:08 UTC (permalink / raw)
To: Hangbin Liu
Cc: David Ahern, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Simon Horman, Shuah Khan, Ido Schimmel, David Ahern,
netdev, linux-kselftest, linux-kernel, Hangbin Liu
On Wed, Sep 30, 2026 at 10:06:24AM +0800, Hangbin Liu wrote:
> From: Hangbin Liu <liuhangbin@kylinos.cn>
>
> fib_tests mixes use of $ret for both per-test return value and global exit
> code. If an earlier subtest fails and a later function sets ret=0, the
> script will exit with status 0 even though [FAIL] lines were printed.
>
> Use RET as the per-test return value, as already defined in lib.sh. The
> exit code ret will only be set in log_test().
>
> Signed-off-by: Hangbin Liu <liuhangbin@kylinos.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-09-30 14:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-30 2:06 [PATCH net-next v2] selftests: fib_tests: use per-test return value in subtests Hangbin Liu
2026-09-30 14:08 ` Ido Schimmel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®