[PATCH v6 0/2] Add RK3588 Tiger DisplayPort carrier

[PATCH v6 0/2] Add RK3588 Tiger DisplayPort carrier

[Heiko Stuebner]

A board that allows easy testing of the Analogix eDP controller on the
RK3588. Requires Damon's recent work on hotplugging the eDP controller
displays [0].

Concerning displays, my current setup is

  DP-carrier -> DP-port -> DP-to-eDP converter from Aliexpress -> eDP panel

which produces a nice 1080p image.

changes in v6:
- address comments from Quentin
- Remove misleading dp/hdmi hpd pins (as they would have inverted levels
- drop dp-connector label - it's optional and the board is not labeled
- drop redundant uart2 pinctrl-0 setting

changes in v5:
- didn't take a year since v4 ;-)
- drop wrong quotes around Rob's Rb
- drop wrong link-trailers that slipped into v4
- disable mmu600_pcie for the time being
- move hpd-gpio back to the dp-connector where it belongs
  With v3 of the hpd series, this now works as expected

changes in v4:
- move hpd-gpio down the the analogix-dp node
  As stated in commit cb640b2ca546 ("drm/bridge: display-connector: don't
  set OP_DETECT for DisplayPorts") the dp-connector can't just read the
  hpd-gpio and mark that as monitor detected, instead 

changes in v3:
- rebase on top of 6.17-rc1
- still should wait on the analogix bridge support

changes in v2:
- collect Ack/Review for binding
- address Quentin's comments
  - sorting in Makefile and dp-connector properties
  - ethernet alias
  - drop data-lanes comment

[0] https://lore.kernel.org/dri-devel/20260928081418.3605775-1-damon.ding@rock-chips.com

Heiko Stuebner (2):
  dt-bindings: arm: rockchip: add RK3588 DP carrier from Theobroma
    Systems
  arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

 .../devicetree/bindings/arm/rockchip.yaml     |   6 +-
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../rk3588-tiger-displayport-carrier.dts      | 110 ++++++++++++++++++
 3 files changed, 115 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts

-- 
2.47.3

[PATCH v6 1/2] dt-bindings: arm: rockchip: add RK3588 DP carrier from Theobroma Systems

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

The DisplayPort carrier is a very simple baseboard only providing serial,
ethernet and a displayport output.

But its main functionality is that it routes the Analogix eDP controller
to this DisplayPort output, which allows to test that controller simply
by hooking it up to a suitable monitor.

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index a799bb843f74..3b270690afca 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -1336,9 +1336,11 @@ properties:
           - const: tsd,rk3588-jaguar
           - const: rockchip,rk3588
 
-      - description: Theobroma Systems RK3588-Q7 with Haikou baseboard
+      - description: Theobroma Systems RK3588-Q7 with baseboards
         items:
-          - const: tsd,rk3588-tiger-haikou
+          - enum:
+              - tsd,rk3588-tiger-displayport-carrier
+              - tsd,rk3588-tiger-haikou
           - const: tsd,rk3588-tiger
           - const: rockchip,rk3588
 
-- 
2.47.3

[PATCH v6 2/2] arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

The DisplayPort carrier is a very simple baseboard only providing serial,
ethernet and a displayport output.

But its main functionality is that it routes the Analogix eDP controller
to this DisplayPort output, which allows to test that controller simply
by hooking it up to a suitable monitor.

The Analogix-DP controller supports eDP 1.3 and DP 1.2, so can drive
both eDP displays as well as full DP monitors. It does not support DP+
so passive DP-to-HDMI adapters won't work.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../rk3588-tiger-displayport-carrier.dts      | 110 ++++++++++++++++++
 2 files changed, 111 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 2edc9c0aceb5..bf80afba2351 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -217,6 +217,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus-radxa-cam4k-cam0.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus-radxa-cam4k-cam1.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5t.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-displayport-carrier.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts
new file mode 100644
index 000000000000..fee3dec3b1b1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588-tiger.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-Q7 SoM on Tiger Displayport Carrier v1";
+	compatible = "tsd,rk3588-tiger-displayport-carrier", "tsd,rk3588-tiger", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	dp-connector {
+		compatible = "dp-connector";
+		dp-pwr-supply = <&vcc3v3_baseboard>;
+		hpd-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&edp0_hpd_l>;
+		pinctrl-names = "default";
+		type = "full-size";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&edp0_out_con>;
+			};
+		};
+	};
+
+	vcc3v3_baseboard: regulator-vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vcc5v0_baseboard: regulator-vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&edp0 {
+	status = "okay";
+};
+
+&edp0_in {
+	edp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_edp0>;
+	};
+};
+
+&edp0_out {
+	edp0_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&mmu600_pcie {
+	status = "disabled";
+};
+
+&pinctrl {
+	edp0 {
+		edp0_hpd_l: edp0-hpd-l-pin {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp2 {
+	vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
+		reg = <ROCKCHIP_VOP2_EP_EDP0>;
+		remote-endpoint = <&edp0_in_vp2>;
+	};
+};
-- 
2.47.3

Re: [PATCH v6 2/2] arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

[Quentin Schulz]

Hi Heiko,

On 10/2/26 4:03 PM, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@cherry.de>
> 
> The DisplayPort carrier is a very simple baseboard only providing serial,
> ethernet and a displayport output.
> 
> But its main functionality is that it routes the Analogix eDP controller
> to this DisplayPort output, which allows to test that controller simply
> by hooking it up to a suitable monitor.
> 
> The Analogix-DP controller supports eDP 1.3 and DP 1.2, so can drive
> both eDP displays as well as full DP monitors. It does not support DP+
> so passive DP-to-HDMI adapters won't work.
> 

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

Thanks!
Quentin