* [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE()
@ 2026-10-02 12:16 Barnabás Pőcze
2026-10-02 14:59 ` Jai Luthra
2026-10-02 15:18 ` Niklas Söderlund
0 siblings, 2 replies; 4+ messages in thread
From: Barnabás Pőcze @ 2026-10-02 12:16 UTC (permalink / raw)
To: Jacopo Mondi, Jai Luthra, Niklas Söderlund,
Mauro Carvalho Chehab, Sakari Ailus
Cc: linux-media, linux-kernel, Barnabás Pőcze
Firstly, the size values are 10-bit unsigned integers, and there doesn't
appear to be an upper limit in the hardware documentation, and testing also
seems to confirm that 1023 works as expected, so the correct mask to use is
0x3ff (1023), not 0x1ff (511).
Secondly, actually use `LSC_SIZE_VALUE()` when populating the size registers
instead of using the `LSC_GRAD_VALUE()` macro.
Fixes: b39656efb71a ("media: rppx1: lsc: Add support for lens shade correction")
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
---
.../platform/dreamchip/rppx1/rppx1_lsc.c | 34 +++++++++----------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c
index 8badeca23e249..ffc52ca23dd99 100644
--- a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c
+++ b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c
@@ -57,7 +57,7 @@
#define LSC_R_TABLE_DATA_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 12))
#define LSC_GRAD_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 16))
-#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x1ff) | (((v2) & 0x1ff) << 16))
+#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x3ff) | (((v2) & 0x3ff) << 16))
static int rppx1_lsc_probe(struct rpp_module *mod)
{
@@ -157,24 +157,24 @@ rppx1_lsc_fill_params(struct rpp_module *mod,
write(priv, mod->base + LSC_YGRAD_1415_REG, LSC_GRAD_VALUE(v[14], v[15]));
v = cfg->x_sect_size;
- write(priv, mod->base + LSC_XSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1]));
- write(priv, mod->base + LSC_XSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3]));
- write(priv, mod->base + LSC_XSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5]));
- write(priv, mod->base + LSC_XSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7]));
- write(priv, mod->base + LSC_XSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9]));
- write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11]));
- write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13]));
- write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15]));
+ write(priv, mod->base + LSC_XSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1]));
+ write(priv, mod->base + LSC_XSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3]));
+ write(priv, mod->base + LSC_XSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5]));
+ write(priv, mod->base + LSC_XSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7]));
+ write(priv, mod->base + LSC_XSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9]));
+ write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11]));
+ write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13]));
+ write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15]));
v = cfg->y_sect_size;
- write(priv, mod->base + LSC_YSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1]));
- write(priv, mod->base + LSC_YSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3]));
- write(priv, mod->base + LSC_YSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5]));
- write(priv, mod->base + LSC_YSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7]));
- write(priv, mod->base + LSC_YSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9]));
- write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11]));
- write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13]));
- write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15]));
+ write(priv, mod->base + LSC_YSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1]));
+ write(priv, mod->base + LSC_YSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3]));
+ write(priv, mod->base + LSC_YSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5]));
+ write(priv, mod->base + LSC_YSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7]));
+ write(priv, mod->base + LSC_YSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9]));
+ write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11]));
+ write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13]));
+ write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15]));
/* Enable module. */
write(priv, mod->base + LSC_CTRL_REG, LSC_CTRL_LSC_EN);
--
2.56.0
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE() 2026-10-02 12:16 [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE() Barnabás Pőcze @ 2026-10-02 14:59 ` Jai Luthra 2026-10-02 15:18 ` Niklas Söderlund 1 sibling, 0 replies; 4+ messages in thread From: Jai Luthra @ 2026-10-02 14:59 UTC (permalink / raw) To: Barnabás Pőcze, Jacopo Mondi, Jai Luthra, Mauro Carvalho Chehab, Niklas Söderlund, Sakari Ailus Cc: linux-media, linux-kernel, Barnabás Pőcze Hi Barnabás, Quoting Barnabás Pőcze (2026-10-02 17:46:43) > Firstly, the size values are 10-bit unsigned integers, and there doesn't > appear to be an upper limit in the hardware documentation, and testing also > seems to confirm that 1023 works as expected, so the correct mask to use is > 0x3ff (1023), not 0x1ff (511). > > Secondly, actually use `LSC_SIZE_VALUE()` when populating the size registers > instead of using the `LSC_GRAD_VALUE()` macro. > > Fixes: b39656efb71a ("media: rppx1: lsc: Add support for lens shade correction") > Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com> Good catch, thanks for the quick fix. Reviewed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com> Thanks, Jai > --- > .../platform/dreamchip/rppx1/rppx1_lsc.c | 34 +++++++++---------- > 1 file changed, 17 insertions(+), 17 deletions(-) > > diff --git a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c > index 8badeca23e249..ffc52ca23dd99 100644 > --- a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c > +++ b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c > @@ -57,7 +57,7 @@ > > #define LSC_R_TABLE_DATA_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 12)) > #define LSC_GRAD_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 16)) > -#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x1ff) | (((v2) & 0x1ff) << 16)) > +#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x3ff) | (((v2) & 0x3ff) << 16)) > > static int rppx1_lsc_probe(struct rpp_module *mod) > { > @@ -157,24 +157,24 @@ rppx1_lsc_fill_params(struct rpp_module *mod, > write(priv, mod->base + LSC_YGRAD_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); > > v = cfg->x_sect_size; > - write(priv, mod->base + LSC_XSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1])); > - write(priv, mod->base + LSC_XSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3])); > - write(priv, mod->base + LSC_XSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5])); > - write(priv, mod->base + LSC_XSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7])); > - write(priv, mod->base + LSC_XSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9])); > - write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11])); > - write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13])); > - write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); > + write(priv, mod->base + LSC_XSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1])); > + write(priv, mod->base + LSC_XSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3])); > + write(priv, mod->base + LSC_XSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5])); > + write(priv, mod->base + LSC_XSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7])); > + write(priv, mod->base + LSC_XSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9])); > + write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11])); > + write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13])); > + write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15])); > > v = cfg->y_sect_size; > - write(priv, mod->base + LSC_YSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1])); > - write(priv, mod->base + LSC_YSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3])); > - write(priv, mod->base + LSC_YSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5])); > - write(priv, mod->base + LSC_YSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7])); > - write(priv, mod->base + LSC_YSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9])); > - write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11])); > - write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13])); > - write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); > + write(priv, mod->base + LSC_YSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1])); > + write(priv, mod->base + LSC_YSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3])); > + write(priv, mod->base + LSC_YSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5])); > + write(priv, mod->base + LSC_YSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7])); > + write(priv, mod->base + LSC_YSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9])); > + write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11])); > + write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13])); > + write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15])); > > /* Enable module. */ > write(priv, mod->base + LSC_CTRL_REG, LSC_CTRL_LSC_EN); > -- > 2.56.0 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE() 2026-10-02 12:16 [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE() Barnabás Pőcze 2026-10-02 14:59 ` Jai Luthra @ 2026-10-02 15:18 ` Niklas Söderlund 2026-10-02 15:27 ` Barnabás Pőcze 1 sibling, 1 reply; 4+ messages in thread From: Niklas Söderlund @ 2026-10-02 15:18 UTC (permalink / raw) To: Barnabás Pőcze Cc: Jacopo Mondi, Jai Luthra, Mauro Carvalho Chehab, Sakari Ailus, linux-media, linux-kernel Hi Barnabás, Nice catch! On 2026-10-02 14:16:43 +0200, Barnabás Pőcze wrote: > Firstly, the size values are 10-bit unsigned integers, and there doesn't > appear to be an upper limit in the hardware documentation, and testing also > seems to confirm that 1023 works as expected, so the correct mask to use is > 0x3ff (1023), not 0x1ff (511). I have the fields (x_sect_size_{0,1}) in RPP_MAIN_PRE1_LSC_XSIZE_01 defined as 10-bits so it is documented right? The thing here is that the incorrect define LSC_GRAD_VALUE was used where LSC_SIZE_VALUE should have, and this masked the error, no? > > Secondly, actually use `LSC_SIZE_VALUE()` when populating the size registers > instead of using the `LSC_GRAD_VALUE()` macro. > > Fixes: b39656efb71a ("media: rppx1: lsc: Add support for lens shade correction") > Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com> This fixes it correctly. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > .../platform/dreamchip/rppx1/rppx1_lsc.c | 34 +++++++++---------- > 1 file changed, 17 insertions(+), 17 deletions(-) > > diff --git a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c > index 8badeca23e249..ffc52ca23dd99 100644 > --- a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c > +++ b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c > @@ -57,7 +57,7 @@ > > #define LSC_R_TABLE_DATA_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 12)) > #define LSC_GRAD_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 16)) > -#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x1ff) | (((v2) & 0x1ff) << 16)) > +#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x3ff) | (((v2) & 0x3ff) << 16)) > > static int rppx1_lsc_probe(struct rpp_module *mod) > { > @@ -157,24 +157,24 @@ rppx1_lsc_fill_params(struct rpp_module *mod, > write(priv, mod->base + LSC_YGRAD_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); > > v = cfg->x_sect_size; > - write(priv, mod->base + LSC_XSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1])); > - write(priv, mod->base + LSC_XSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3])); > - write(priv, mod->base + LSC_XSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5])); > - write(priv, mod->base + LSC_XSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7])); > - write(priv, mod->base + LSC_XSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9])); > - write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11])); > - write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13])); > - write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); > + write(priv, mod->base + LSC_XSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1])); > + write(priv, mod->base + LSC_XSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3])); > + write(priv, mod->base + LSC_XSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5])); > + write(priv, mod->base + LSC_XSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7])); > + write(priv, mod->base + LSC_XSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9])); > + write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11])); > + write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13])); > + write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15])); > > v = cfg->y_sect_size; > - write(priv, mod->base + LSC_YSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1])); > - write(priv, mod->base + LSC_YSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3])); > - write(priv, mod->base + LSC_YSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5])); > - write(priv, mod->base + LSC_YSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7])); > - write(priv, mod->base + LSC_YSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9])); > - write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11])); > - write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13])); > - write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); > + write(priv, mod->base + LSC_YSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1])); > + write(priv, mod->base + LSC_YSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3])); > + write(priv, mod->base + LSC_YSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5])); > + write(priv, mod->base + LSC_YSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7])); > + write(priv, mod->base + LSC_YSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9])); > + write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11])); > + write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13])); > + write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15])); > > /* Enable module. */ > write(priv, mod->base + LSC_CTRL_REG, LSC_CTRL_LSC_EN); > -- > 2.56.0 > -- Kind Regards, Niklas Söderlund ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE() 2026-10-02 15:18 ` Niklas Söderlund @ 2026-10-02 15:27 ` Barnabás Pőcze 0 siblings, 0 replies; 4+ messages in thread From: Barnabás Pőcze @ 2026-10-02 15:27 UTC (permalink / raw) To: Niklas Söderlund, Barnabás Pőcze Cc: Jacopo Mondi, Jai Luthra, Mauro Carvalho Chehab, Sakari Ailus, linux-media, linux-kernel 2026. 10. 02. 17:18 keltezéssel, Niklas Söderlund írta: > Hi Barnabás, > > Nice catch! > > On 2026-10-02 14:16:43 +0200, Barnabás Pőcze wrote: >> Firstly, the size values are 10-bit unsigned integers, and there doesn't >> appear to be an upper limit in the hardware documentation, and testing also >> seems to confirm that 1023 works as expected, so the correct mask to use is >> 0x3ff (1023), not 0x1ff (511). > > I have the fields (x_sect_size_{0,1}) in RPP_MAIN_PRE1_LSC_XSIZE_01 > defined as 10-bits so it is documented right? The thing here is that the > incorrect define LSC_GRAD_VALUE was used where LSC_SIZE_VALUE should > have, and this masked the error, no? Yes, to both. Sorry, now I realize my description is probably confusing. What I meant by "there doesn't appear to be an upper limit" is that all 10 bits can be used, so the upper limit is 1023, i.e. there isn't an "additional" upper limit documented apart from the limit inherent in the bit width of the field. So it should've been something like Firstly, the size values are defined as 10-bit unsigned integers, and there doesn't appear to be an additional upper limit in the hardware documentation, so the upper limit should be 1023, which has been confirmed to work empirically. So the correct mask to use is 0x3ff (1023), not 0x1ff (511). > >> >> Secondly, actually use `LSC_SIZE_VALUE()` when populating the size registers >> instead of using the `LSC_GRAD_VALUE()` macro. >> >> Fixes: b39656efb71a ("media: rppx1: lsc: Add support for lens shade correction") >> Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com> > > This fixes it correctly. > > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > >> --- >> .../platform/dreamchip/rppx1/rppx1_lsc.c | 34 +++++++++---------- >> 1 file changed, 17 insertions(+), 17 deletions(-) >> >> diff --git a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c >> index 8badeca23e249..ffc52ca23dd99 100644 >> --- a/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c >> +++ b/drivers/media/platform/dreamchip/rppx1/rppx1_lsc.c >> @@ -57,7 +57,7 @@ >> >> #define LSC_R_TABLE_DATA_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 12)) >> #define LSC_GRAD_VALUE(v1, v2) (((v1) & 0xfff) | (((v2) & 0xfff) << 16)) >> -#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x1ff) | (((v2) & 0x1ff) << 16)) >> +#define LSC_SIZE_VALUE(v1, v2) (((v1) & 0x3ff) | (((v2) & 0x3ff) << 16)) >> >> static int rppx1_lsc_probe(struct rpp_module *mod) >> { >> @@ -157,24 +157,24 @@ rppx1_lsc_fill_params(struct rpp_module *mod, >> write(priv, mod->base + LSC_YGRAD_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); >> >> v = cfg->x_sect_size; >> - write(priv, mod->base + LSC_XSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1])); >> - write(priv, mod->base + LSC_XSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3])); >> - write(priv, mod->base + LSC_XSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5])); >> - write(priv, mod->base + LSC_XSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7])); >> - write(priv, mod->base + LSC_XSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9])); >> - write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11])); >> - write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13])); >> - write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); >> + write(priv, mod->base + LSC_XSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1])); >> + write(priv, mod->base + LSC_XSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3])); >> + write(priv, mod->base + LSC_XSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5])); >> + write(priv, mod->base + LSC_XSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7])); >> + write(priv, mod->base + LSC_XSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9])); >> + write(priv, mod->base + LSC_XSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11])); >> + write(priv, mod->base + LSC_XSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13])); >> + write(priv, mod->base + LSC_XSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15])); >> >> v = cfg->y_sect_size; >> - write(priv, mod->base + LSC_YSIZE_01_REG, LSC_GRAD_VALUE(v[0], v[1])); >> - write(priv, mod->base + LSC_YSIZE_23_REG, LSC_GRAD_VALUE(v[2], v[3])); >> - write(priv, mod->base + LSC_YSIZE_45_REG, LSC_GRAD_VALUE(v[4], v[5])); >> - write(priv, mod->base + LSC_YSIZE_67_REG, LSC_GRAD_VALUE(v[6], v[7])); >> - write(priv, mod->base + LSC_YSIZE_89_REG, LSC_GRAD_VALUE(v[8], v[9])); >> - write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_GRAD_VALUE(v[10], v[11])); >> - write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_GRAD_VALUE(v[12], v[13])); >> - write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_GRAD_VALUE(v[14], v[15])); >> + write(priv, mod->base + LSC_YSIZE_01_REG, LSC_SIZE_VALUE(v[0], v[1])); >> + write(priv, mod->base + LSC_YSIZE_23_REG, LSC_SIZE_VALUE(v[2], v[3])); >> + write(priv, mod->base + LSC_YSIZE_45_REG, LSC_SIZE_VALUE(v[4], v[5])); >> + write(priv, mod->base + LSC_YSIZE_67_REG, LSC_SIZE_VALUE(v[6], v[7])); >> + write(priv, mod->base + LSC_YSIZE_89_REG, LSC_SIZE_VALUE(v[8], v[9])); >> + write(priv, mod->base + LSC_YSIZE_1011_REG, LSC_SIZE_VALUE(v[10], v[11])); >> + write(priv, mod->base + LSC_YSIZE_1213_REG, LSC_SIZE_VALUE(v[12], v[13])); >> + write(priv, mod->base + LSC_YSIZE_1415_REG, LSC_SIZE_VALUE(v[14], v[15])); >> >> /* Enable module. */ >> write(priv, mod->base + LSC_CTRL_REG, LSC_CTRL_LSC_EN); >> -- >> 2.56.0 >> > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-10-02 15:27 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2026-10-02 12:16 [PATCH v1] media: rppx1: lsc: Fix and use LSC_SIZE_VALUE() Barnabás Pőcze 2026-10-02 14:59 ` Jai Luthra 2026-10-02 15:18 ` Niklas Söderlund 2026-10-02 15:27 ` Barnabás Pőcze
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®