From: Jiale Yao <yaojiale02@163.com>
To: Nas Chung <nas.chung@chipsnmedia.com>,
Jackson Lee <jackson.lee@chipsnmedia.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Hans Verkuil <hverkuil@kernel.org>,
Sebastian Fricke <sebastian.fricke@collabora.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jiale Yao <yaojiale02@163.com>
Subject: [PATCH 2/4] media: wave5: handle encoder runtime resume failures
Date: Sat, 3 Oct 2026 16:08:50 +0800 [thread overview]
Message-ID: <20261003080853.430099-3-yaojiale02@163.com> (raw)
In-Reply-To: <20261003080853.430099-1-yaojiale02@163.com>
The encoder callbacks ignore failures from pm_runtime_resume_and_get()
and continue issuing firmware commands. Runtime resume can fail while
enabling the VPU clocks, leaving the registers inaccessible. The
callbacks then also drop a runtime PM reference that was not acquired.
Check each resume result. Propagate the error from start_streaming(),
and return queued buffers or finish the job from void callbacks without
accessing the hardware or issuing an unmatched put.
Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
---
.../chips-media/wave5/wave5-vpu-enc.c | 25 ++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
index f9fcdf4c224b..5a5ee70cd854 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
@@ -1351,7 +1351,12 @@ static int wave5_vpu_enc_start_streaming(struct vb2_queue *q, unsigned int count
struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
int ret = 0;
- pm_runtime_resume_and_get(inst->dev->dev);
+ ret = pm_runtime_resume_and_get(inst->dev->dev);
+ if (ret < 0) {
+ wave5_return_bufs(q, VB2_BUF_STATE_QUEUED);
+ return ret;
+ }
+
v4l2_m2m_update_start_streaming_state(m2m_ctx, q);
if (inst->state == VPU_INST_STATE_NONE && q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
@@ -1451,6 +1456,7 @@ static void wave5_vpu_enc_stop_streaming(struct vb2_queue *q)
{
struct vpu_instance *inst = vb2_get_drv_priv(q);
bool check_cmd = true;
+ int ret;
/*
* Note that we don't need m2m_ctx->next_buf_last for this driver, so we
@@ -1458,7 +1464,14 @@ static void wave5_vpu_enc_stop_streaming(struct vb2_queue *q)
*/
dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
- pm_runtime_resume_and_get(inst->dev->dev);
+ ret = pm_runtime_resume_and_get(inst->dev->dev);
+ if (ret < 0) {
+ if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ streamoff_output(inst, q);
+ else
+ streamoff_capture(inst, q);
+ return;
+ }
if (wave5_vpu_both_queues_are_streaming(inst))
switch_state(inst, VPU_INST_STATE_STOP);
@@ -1526,7 +1539,13 @@ static void wave5_vpu_enc_device_run(void *priv)
u32 fail_res = 0;
int ret = 0;
- pm_runtime_resume_and_get(inst->dev->dev);
+ ret = pm_runtime_resume_and_get(inst->dev->dev);
+ if (ret < 0) {
+ dev_err(inst->dev->dev, "Failed to resume VPU: %d\n", ret);
+ v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
+ return;
+ }
+
switch (inst->state) {
case VPU_INST_STATE_PIC_RUN:
ret = start_encode(inst, &fail_res);
--
2.34.1
next prev parent reply other threads:[~2026-10-03 8:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-03 8:08 [PATCH 0/4] media: wave5: fix runtime PM error handling Jiale Yao
2026-10-03 8:08 ` [PATCH 1/4] media: wave5: handle decoder runtime resume failures Jiale Yao
2026-10-07 16:24 ` Brandon Brnich
2026-10-03 8:08 ` Jiale Yao [this message]
2026-10-03 8:08 ` [PATCH 3/4] media: wave5: handle runtime resume failure when closing Jiale Yao
2026-10-03 8:08 ` [PATCH 4/4] media: wave5: release runtime PM reference on encoder close errors Jiale Yao
2026-10-07 16:15 ` Brandon Brnich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261003080853.430099-3-yaojiale02@163.com \
--to=yaojiale02@163.com \
--cc=hverkuil@kernel.org \
--cc=jackson.lee@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=sebastian.fricke@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®