[PATCH v2 2/2] riscv: dts: sophgo: cv180x: Fix internal ephy node name

[Chen-Yu Yeh <chenyou910331@gmail.com>]

The internal EPHY node is named "phy@0" while its reg property is <1>.
The unit-address should match the first entry of the reg property, but
this is not checked by dtc for MDIO buses. The kernel confirms the PHY
is indeed at address 1:

  eth0: PHY [mdio_mux-0.0:01] driver [Generic PHY]

Rename the node to ethernet-phy@1, which also follows the common naming
convention for ethernet PHY nodes.

Fixes: ba1abacc57cb ("riscv: dts: sophgo: Add mdio multiplexer device for cv18xx")

Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen-Yu Yeh <chenyou910331@gmail.com>
---
 arch/riscv/boot/dts/sophgo/cv180x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
index ec3bf305274a..cf672cc6b935 100644
--- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -71,7 +71,7 @@ internal_mdio: mdio@0 {
 				#size-cells = <0>;
 				reg = <0>;
 
-				internal_ephy: phy@0 {
+				internal_ephy: phy@1 {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <1>;
 				};
-- 
2.43.0