From: Pablo del Arco <pablodelarco1@gmail.com>
To: andersson@kernel.org, konradybcio@kernel.org
Cc: abelvesa@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: qcom: monaco: Add EL2 overlay for monaco-arduino-monza
Date: Sun, 4 Oct 2026 12:18:49 +0200 [thread overview]
Message-ID: <20261004101849.34191-1-pablodelarco1@gmail.com> (raw)
Build an EL2 combined DTB for the Arduino VENTUNO Q (monaco-arduino-monza)
from the base DTB and monaco-el2.dtbo, as monaco-evk-el2.dtb already does
for the Monaco EVK.
The board boots under Gunyah by default. This DTB lets it run Linux at EL2
with KVM when the boot firmware is set up for that.
Signed-off-by: Pablo del Arco <pablodelarco1@gmail.com>
---
Build tested with CHECK_DTBS=y on top of qcom for-next. Not boot tested at EL2,
the board ships boot firmware set up for Gunyah.
arch/arm64/boot/dts/qcom/Makefile | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 88230c4e0..859586cdc 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -68,6 +68,10 @@ dtb-$(CONFIG_ARCH_QCOM) += mahua-lenovo-thinkpad-t14s-gen7-lcd.dtb
dtb-$(CONFIG_ARCH_QCOM) += milos-fairphone-fp6.dtb
dtb-$(CONFIG_ARCH_QCOM) += milos-nothing-asteroids.dtb
dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza.dtb
+
+monaco-arduino-monza-el2-dtbs := monaco-arduino-monza.dtb monaco-el2.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza-el2.dtb
dtb-$(CONFIG_ARCH_QCOM) += monaco-ac-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb
--
2.43.0
reply other threads:[~2026-10-04 10:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261004101849.34191-1-pablodelarco1@gmail.com \
--to=pablodelarco1@gmail.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®