* [PATCH v4] crypto: talitos: init tasklets before requesting IRQs
@ 2026-10-04 21:50 Rosen Penev
0 siblings, 0 replies; only message in thread
From: Rosen Penev @ 2026-10-04 21:50 UTC (permalink / raw)
To: linux-crypto; +Cc: Herbert Xu, David S. Miller, Kim Phillips, open list
The talitos interrupt handlers schedule priv->done_task[] via
tasklet_schedule(). Since the second IRQ support, probe has requested
the IRQs before calling tasklet_init(), so an interrupt already pending
when a line is requested, e.g. engine state left by the bootloader or
a kexec'd kernel, would schedule a tasklet with a NULL callback.
Look up the IRQ numbers and map the registers up front, so that
-EPROBE_DEFER returns before anything is allocated and the done_task[]
selection and reset_device() can see the secondary IRQ. Only request
the IRQs once the channel fifos are allocated and init_device() has
reset the engine. This matches remove(), which frees the IRQs before
killing the tasklets.
remove() frees every IRQ number that is > 0, so make sure that only
requested lines are set when it runs from the probe error path: clear
both numbers when probe fails before the request, and clear any line
talitos_probe_irq() did not request. Previously a failed primary
request in the two-IRQ case freed the never-requested secondary line.
Fixes: c3e337f88a5b ("crypto: talitos - support for channel remap and 2nd IRQ")
Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
v4: actually fix IRQs this time. Add a Fixes: tag.
v3: reshuffle again to fix IRQs.
v2: reshuffle code to avoid NULL derefs
drivers/crypto/talitos.c | 54 ++++++++++++++++++++++++----------------
1 file changed, 33 insertions(+), 21 deletions(-)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 41a87d7c30a0..c7d9ce2905be 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -3353,21 +3353,13 @@ static int talitos_probe_irq(struct platform_device *ofdev)
int err;
bool is_sec1 = has_ftr_sec1(priv);
- priv->irq[0] = platform_get_irq(ofdev, 0);
- if (priv->irq[0] < 0)
- return priv->irq[0];
-
if (is_sec1) {
err = request_irq(priv->irq[0], talitos1_interrupt_4ch, 0,
dev_driver_string(dev), priv);
goto primary_out;
}
- priv->irq[1] = platform_get_irq_optional(ofdev, 1);
- if (priv->irq[1] == -EPROBE_DEFER)
- return priv->irq[1];
-
- /* get the primary irq line */
+ /* single (or primary) irq line */
if (priv->irq[1] < 0) {
err = request_irq(priv->irq[0], talitos2_interrupt_4ch, 0,
dev_driver_string(dev), priv);
@@ -3379,7 +3371,7 @@ static int talitos_probe_irq(struct platform_device *ofdev)
if (err)
goto primary_out;
- /* get the secondary irq line */
+ /* secondary irq line */
err = request_irq(priv->irq[1], talitos2_interrupt_ch1_3, 0,
dev_driver_string(dev), priv);
if (err) {
@@ -3392,7 +3384,9 @@ static int talitos_probe_irq(struct platform_device *ofdev)
primary_out:
if (err) {
dev_err(dev, "failed to request primary irq\n");
+ /* neither line is requested, keep remove() from freeing them */
priv->irq[0] = 0;
+ priv->irq[1] = 0;
}
return err;
@@ -3404,12 +3398,27 @@ static int talitos_probe(struct platform_device *ofdev)
struct device_node *np = ofdev->dev.of_node;
struct talitos_private *priv;
unsigned int num_channels;
+ void __iomem *reg;
int i, err;
int stride;
+ int irq0;
+ int irq1;
if (of_property_read_u32(np, "fsl,num-channels", &num_channels))
return -EINVAL;
+ irq0 = platform_get_irq(ofdev, 0);
+ if (irq0 < 0)
+ return irq0;
+
+ irq1 = platform_get_irq_optional(ofdev, 1);
+ if (irq1 == -EPROBE_DEFER)
+ return irq1;
+
+ reg = devm_platform_ioremap_resource(ofdev, 0);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
priv = devm_kzalloc(dev, struct_size(priv, chan, num_channels), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -3425,12 +3434,7 @@ static int talitos_probe(struct platform_device *ofdev)
spin_lock_init(&priv->reg_lock);
- priv->reg = devm_platform_ioremap_resource(ofdev, 0);
- if (IS_ERR(priv->reg)) {
- dev_err(dev, "failed to of_iomap\n");
- err = PTR_ERR(priv->reg);
- goto err_out;
- }
+ priv->reg = reg;
/* get SEC version capabilities from device tree */
of_property_read_u32(np, "fsl,channel-fifo-len", &priv->chfifo_len);
@@ -3481,9 +3485,7 @@ static int talitos_probe(struct platform_device *ofdev)
stride = TALITOS2_CH_STRIDE;
}
- err = talitos_probe_irq(ofdev);
- if (err)
- goto err_out;
+ priv->irq[0] = irq0;
if (has_ftr_sec1(priv)) {
if (priv->num_channels == 1)
@@ -3493,6 +3495,7 @@ static int talitos_probe(struct platform_device *ofdev)
tasklet_init(&priv->done_task[0], talitos1_done_4ch,
(unsigned long)dev);
} else {
+ priv->irq[1] = irq1;
if (priv->irq[1] > 0) {
tasklet_init(&priv->done_task[0], talitos2_done_ch0_2,
(unsigned long)dev);
@@ -3524,7 +3527,7 @@ static int talitos_probe(struct platform_device *ofdev)
if (!priv->chan[i].fifo) {
dev_err(dev, "failed to allocate request fifo %d\n", i);
err = -ENOMEM;
- goto err_out;
+ goto err_noirq;
}
atomic_set(&priv->chan[i].submit_count,
@@ -3537,9 +3540,14 @@ static int talitos_probe(struct platform_device *ofdev)
err = init_device(dev);
if (err) {
dev_err(dev, "failed to initialize device\n");
- goto err_out;
+ goto err_noirq;
}
+ /* enable interrupts once the channel fifos and tasklets are set up */
+ err = talitos_probe_irq(ofdev);
+ if (err)
+ goto err_out;
+
/* register the RNG, if available */
if (hw_supports(dev, DESC_HDR_SEL0_RNG)) {
err = talitos_register_rng(dev);
@@ -3597,6 +3605,10 @@ static int talitos_probe(struct platform_device *ofdev)
return 0;
+err_noirq:
+ /* the irq numbers are known, but the lines are not requested yet */
+ priv->irq[0] = 0;
+ priv->irq[1] = 0;
err_out:
talitos_remove(ofdev);
--
2.56.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-10-04 21:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-04 21:50 [PATCH v4] crypto: talitos: init tasklets before requesting IRQs Rosen Penev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®