[PATCH] dt-bindings: pwm: Convert NXP PCA9685 PWM controller to DT schema

[PATCH] dt-bindings: pwm: Convert NXP PCA9685 PWM controller to DT schema

[Jeremy Dean]

Convert the NXP PCA9685 PWM controller binding to DT schema format.

Changes from the text binding:

Document the 'reg' property and make it required. It was missing
from the text binding, although the example used it and the device
cannot work without the I2C address.

Rename the example node to the generic 'pwm', as required by
pwm.yaml.

Describe both cells of the PWM specifier, and state that 'invert'
and 'open-drain' apply to all outputs, as per the datasheet (INVRT
and OUTDRV bits in MODE2).

Assisted-by: LLM
Signed-off-by: Jeremy Dean <deaner92@yahoo.com>
---
The schema was generated with an AI assistant (Claude).
I verified the properties against the driver source, the PCA9685
datasheet, and the text binding. Passes make dt_binding_check.
 .../bindings/pwm/nxp,pca9685-pwm.txt          | 27 --------
 .../bindings/pwm/nxp,pca9685-pwm.yaml         | 62 +++++++++++++++++++
 2 files changed, 62 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt
 create mode 100644 Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.yaml

diff --git a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt
deleted file mode 100644
index f21b55c95738..000000000000
--- a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-NXP PCA9685 16-channel 12-bit PWM LED controller
-================================================
-
-Required properties:
-  - compatible: "nxp,pca9685-pwm"
-  - #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of
-    the cells format.
-    The index 16 is the ALLCALL channel, that sets all PWM channels at the same
-    time.
-
-Optional properties:
-  - invert (bool): boolean to enable inverted logic
-  - open-drain (bool): boolean to configure outputs with open-drain structure;
-		       if omitted use totem-pole structure
-
-Example:
-
-For LEDs that are directly connected to the PCA, the following setting is
-applicable:
-
-pca: pca@41 {
-	compatible = "nxp,pca9685-pwm";
-	#pwm-cells = <2>;
-	reg = <0x41>;
-	invert;
-	open-drain;
-};
diff --git a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.yaml b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.yaml
new file mode 100644
index 000000000000..36b312ac0be9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nxp,pca9685-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9685 16-channel 12-bit PWM LED controller
+
+maintainers:
+  - Jeremy Clifton <deaner92@yahoo.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: nxp,pca9685-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+    description:
+      The first cell is the PWM channel index, from 0 to 15, or 16 for the
+      ALLCALL channel, which sets all PWM channels at the same time. The
+      second cell is the PWM period in nanoseconds.
+
+  invert:
+    type: boolean
+    description:
+      Invert the logic state of all outputs (INVRT bit in the MODE2
+      register). The setting applies to the whole chip, not to individual
+      channels, and is typically used when the outputs drive an external
+      driver stage.
+
+  open-drain:
+    type: boolean
+    description:
+      Configure all outputs with an open-drain structure (OUTDRV bit in the
+      MODE2 register). If omitted, the outputs use a totem-pole structure.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pwm@41 {
+            compatible = "nxp,pca9685-pwm";
+            reg = <0x41>;
+            #pwm-cells = <2>;
+            invert;
+            open-drain;
+        };
+    };

base-commit: bf1ee2bd5c2da8992f33c8950ef194aaff74ed6c
-- 
2.43.0