[PATCH v12 0/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568

[PATCH v12 0/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568

[Coia Prant]

Changes since v11:

- Revert changes in v10.

Changes since v10:

- Drop the top-level "default: 1" for "rockchip,sgmii-mac-sel".
  dtschema injects top-level defaults into every matching node, and the
  injected value conflicts with the "else" branch that forbids the
  property on non-RK3568 variants, breaking dtbs_check on those
  platforms. The driver already treats an absent property as 1 (GMAC1),
  so behavior is unchanged.

===

This is the PHY part split out from the v10 RK3568 SGMII series, sent
separately to linux-phy as suggested by Vinod and Jakub.

On RK3568, the SGMII interface can be routed to either GMAC0 or GMAC1 via
the GRF register pipe_sgmii_mac_sel. Patch 1 documents the
"rockchip,sgmii-mac-sel" DT property, patch 2 adds the driver support.

From the RK3568 TRM (Part1, Page 229), PIPE_GRF_XPCS_CON0 bit 1
(pipe_sgmii_mac_sel) is defined as:

    0: SGMII routed to GMAC0
    1: SGMII routed to GMAC1

The hardware reset value is 1 (GMAC1). If the property is set to 0, the
driver routes SGMII to GMAC0; if set to 1 (or omitted), it remains at
GMAC1. This is necessary for boards such as the Ariaboard Photonicat,
which uses the SGMII interface connected to GMAC0.

The DTS changes using this property are sent separately to
Heiko/linux-rockchip, and the net-next parts (XPCS glue, dwmac-rk SGMII
support) are sent separately to net-next. There is no hard build
dependency; the pieces can converge during the merge window.
---
Coia Prant (2):
  dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel
    property
  phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568

 .../bindings/phy/phy-rockchip-naneng-combphy.yaml   | 13 +++++++++++++
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c  |  8 ++++++++
 2 files changed, 21 insertions(+)

-- 
2.47.3

[PATCH v12 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property

[Coia Prant]

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the pipe_sgmii_mac_sel bit in the pipe GRF registers.

Add the optional "rockchip,sgmii-mac-sel" property to allow the
device tree to select which GMAC controller is used for SGMII.

The property takes a value of 0 (GMAC0) or 1 (GMAC1). The hardware
reset value is 1 (GMAC1), but this can be overridden by setting the
property to 0 for boards where SGMII is connected to GMAC0.

This is necessary for boards such as the Ariaboard Photonicat, where
the SGMII interface is connected to GMAC0 and needs to be explicitly
configured.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 .../bindings/phy/phy-rockchip-naneng-combphy.yaml   | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
index 379b08bd9e97a..8e898bce9af73 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -80,6 +80,15 @@ properties:
     description:
       Some additional pipe settings are accessed through GRF regs.
 
+  rockchip,sgmii-mac-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    default: 1
+    description:
+      Select gmac0 or gmac1 to be used as SGMII controller.
+      The hardware reset value is GMAC1 (1). Set this to 0 to route
+      SGMII to GMAC0.
+
   "#phy-cells":
     const: 1
 
@@ -105,6 +114,10 @@ allOf:
           maxItems: 1
         reset-names:
           maxItems: 1
+        rockchip,sgmii-mac-sel: true
+    else:
+      properties:
+        rockchip,sgmii-mac-sel: false
   - if:
       properties:
         compatible:
-- 
2.47.3

[PATCH v12 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568

[Coia Prant]

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the GRF register pipe_sgmii_mac_sel.

Add support for this selection by introducing
the "rockchip,sgmii-mac-sel" DT property.

From the RK3568 TRM (Part1, Page 229), the PIPE_GRF_XPCS_CON0
bit 1 (pipe_sgmii_mac_sel) is defined as:

    0: SGMII routed to GMAC0
    1: SGMII routed to GMAC1

The hardware reset value is 1 (GMAC1). If the property is set to 0,
the driver routes SGMII to GMAC0; if set to 1 (or omitted), it
remains at GMAC1.

This is necessary for boards such as the Ariaboard Photonicat, which
uses the SGMII interface connected to GMAC0.

Out-of-range values are rejected by dtschema, so the driver does not
duplicate the range check.

Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 229)
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 7843356a4dd47..7b867e7520064 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -186,6 +186,7 @@ struct rockchip_combphy_grfcfg {
 	struct combphy_reg pipe_xpcs_phy_ready;
 	struct combphy_reg pipe_pcie1l0_sel;
 	struct combphy_reg pipe_pcie1l1_sel;
+	struct combphy_reg pipe_sgmii_mac_sel;
 	struct combphy_reg u3otg0_port_en;
 	struct combphy_reg u3otg1_port_en;
 };
@@ -212,6 +213,7 @@ struct rockchip_combphy_priv {
 	bool enable_ssc;
 	bool ext_refclk;
 	struct clk *refclk;
+	u32 sgmii_mac_sel;
 };
 
 static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
@@ -375,6 +377,9 @@ static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy
 
 	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
 
+	priv->sgmii_mac_sel = 1;
+	device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &priv->sgmii_mac_sel);
+
 	priv->phy_rst = devm_reset_control_get_exclusive(dev, "phy");
 	/* fallback to old behaviour */
 	if (PTR_ERR(priv->phy_rst) == -ENOENT)
@@ -873,6 +878,8 @@ static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
 		break;
 
 	case PHY_TYPE_SGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_sgmii_mac_sel,
+					     priv->sgmii_mac_sel > 0);
 		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
@@ -984,6 +991,7 @@ static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
 	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
 	/* pipe-grf */
 	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_sgmii_mac_sel	= { 0x0040, 1, 1, 0x00, 0x01 },
 	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
 	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
 	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },
-- 
2.47.3