From: Luca Leonardo Scorcia <l.scorcia@gmail.com>
To: linux-mediatek@lists.infradead.org
Cc: Luca Leonardo Scorcia <l.scorcia@gmail.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
Chen-Yu Tsai <wenst@chromium.org>,
Fabien Parent <fparent@baylibre.com>,
chunhui dai <chunhui.dai@mediatek.com>,
CK Hu <ck.hu@mediatek.com>,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org
Subject: [PATCH 7/7] arm64: dts: mediatek: mt8167: Add HDMI display nodes
Date: Sat, 10 Oct 2026 13:54:07 +0200 [thread overview]
Message-ID: <20261010115539.9237-8-l.scorcia@gmail.com> (raw)
In-Reply-To: <20261010115539.9237-1-l.scorcia@gmail.com>
Add the required nodes to drive HDMI output on the mt8167 SoC.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt8167.dtsi | 62 ++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 27cf32d7ae35..ab76e0637eb1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -112,6 +112,27 @@ apmixedsys: apmixedsys@10018000 {
#clock-cells = <1>;
};
+ hdmi_phy: hdmi-phy@10018300 {
+ compatible = "mediatek,mt8167-hdmi-phy";
+ reg = <0 0x10018300 0 0x20>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmtx_dig_cts";
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ cec: cec@1001a000 {
+ compatible = "mediatek,mt8167-cec", "mediatek,mt8173-cec";
+ reg = <0 0x1001a000 0 0xbc>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_26M_CEC>;
+ status = "disabled";
+ };
+
iommu: m4u@10203000 {
compatible = "mediatek,mt8167-m4u";
reg = <0 0x10203000 0 0x1000>;
@@ -120,6 +141,15 @@ iommu: m4u@10203000 {
#iommu-cells = <1>;
};
+ hdmiddc: i2c@11011000 {
+ compatible = "mediatek,mt8167-hdmi-ddc", "mediatek,mt8173-hdmi-ddc";
+ reg = <0 0x11011000 0 0x10>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_26M_HDMI_SIFM>;
+ clock-names = "ddc-i2c";
+ status = "disabled";
+ };
+
mmsys: syscon@14000000 {
compatible = "mediatek,mt8167-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
@@ -145,6 +175,38 @@ smi_common: smi@14017000 {
power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
};
+ hdmi: hdmi@1401b000 {
+ compatible = "mediatek,mt8167-hdmi";
+ reg = <0 0x1401b000 0 0x400>;
+ clocks = <&mmsys CLK_MM_HDMI_PXL>,
+ <&mmsys CLK_MM_HDMI_PLL>,
+ <&mmsys CLK_MM_HDMI_ADSP_BCK>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi0_in: endpoint { };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi0_out: endpoint { };
+ };
+ };
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt8167-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
--
2.43.0
prev parent reply other threads:[~2026-10-10 11:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-10 11:54 [PATCH 0/7] Add support for Mediatek mt8167 HDMI display output Luca Leonardo Scorcia
2026-10-10 11:54 ` [PATCH 1/7] dt-bindings: mediatek: hdmi-phy: Add compatible for mt8167 Luca Leonardo Scorcia
2026-10-10 11:54 ` [PATCH 2/7] phy: mediatek: hdmi: Add support " Luca Leonardo Scorcia
2026-10-10 11:54 ` [PATCH 3/7] clk: mediatek: mt8167: Map apmixedsys iomem as shared Luca Leonardo Scorcia
2026-10-10 11:54 ` [PATCH 4/7] clk: mediatek: mt8167: Correct HDMI-related clock definitions Luca Leonardo Scorcia
2026-10-10 11:54 ` [PATCH 5/7] drm/mediatek: mtk_hdmi: Set tz_disabled for mt8167 Luca Leonardo Scorcia
2026-10-10 11:54 ` [PATCH 6/7] drm/mediatek: mtk_hdmi: Improve the secure output bit toggle Luca Leonardo Scorcia
2026-10-10 11:54 ` Luca Leonardo Scorcia [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261010115539.9237-8-l.scorcia@gmail.com \
--to=l.scorcia@gmail.com \
--cc=airlied@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bmasney+clk@redhat.com \
--cc=chunfeng.yun@mediatek.com \
--cc=chunhui.dai@mediatek.com \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fparent@baylibre.com \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=mani@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=nicolas.frattaroli@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=simona@ffwll.ch \
--cc=vkoul@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®