[PATCH 0/2] Input: discard pre-registration events and test state seeding

[PATCH 0/2] Input: discard pre-registration events and test state seeding

[Karlos Abel]

This series prevents input handlers from receiving buffered initialization
events after device registration. On a ThinkPad T14 Gen 6, a later LED
update flushed a stale SW_RFKILL_ALL event seeded by thinkpad_acpi.
The fix drops the pending events and their timestamp before handlers
attach, while retaining the seeded switch and absolute-axis state.

Patch 1 contains the six-line runtime fix. Patch 2 adds KUnit coverage for
registration with and without event-buffer resizing. The test uses a
virtual SW_DOCK device and performs no real radio operations.

Tested on mainline 3857c2fe5449541e24afc5efdb0f81a8a8f9a3a0 (7.3.0-rc6):
 - Tests alone on the unmodified input core: four pass, two fail.
   The non-resizing case replays one stale switch event; both cases
   retain the initialization timestamp.
 - Patch 1 alone: all four existing input-core tests pass.
 - Both patches: all six input-core tests pass.
Both source commits were built and tested under UML without compiler
warnings. The final files match the earlier failing/passing comparison.

The same runtime fix was also tested with QEMU/KVM on Arch 7.2.7 and on
the ThinkPad.

AI assistance: OpenAI Codex assisted source analysis, the fix, regression
tests and this text. The submitter performed the physical hardware
comparisons.

Karlos Abel (2):
  Input: discard pre-registration events before attaching handlers
  Input: test state seeding across device registration

 drivers/input/input.c            |   6 ++
 drivers/input/tests/input_test.c | 168 +++++++++++++++++++++++++++++++
 2 files changed, 174 insertions(+)


base-commit: 3857c2fe5449541e24afc5efdb0f81a8a8f9a3a0

[PATCH 1/2] Input: discard pre-registration events before attaching handlers

[Karlos Abel]

input_event() permits drivers to seed switch and absolute-axis state
before registration without delivering those events to input handlers.
After event-buffer allocation moved to input_allocate_device(), such
initialization events can remain queued across input_register_device()
when the buffer does not need resizing.

A later injected LED event followed by SYN_REPORT then delivers the old
switch event to newly attached handlers. This was observed with the
initial SW_RFKILL_ALL event from thinkpad_acpi on a ThinkPad T14 Gen 6:
an LED update replayed the initial radio-switch event after registration.
Registration can also leave a pre-registration timestamp attached to the
first real event packet, including when the event buffer is resized.

Clear the pending event count and monotonic timestamp under event_lock
before attaching handlers. Keep the switch and absolute-axis state that
was seeded by those events. Resetting the monotonic timestamp follows the
existing flush path and lets the next packet obtain a fresh timestamp.

Fixes: 0cd587735205 ("Input: preallocate memory to hold event values")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Karlos Abel <kabel@voidship.net>
---
 drivers/input/input.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 01c91fec9..d59d62caa 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -2445,6 +2445,12 @@ int input_register_device(struct input_dev *dev)
 
 	error = -EINTR;
 	scoped_cond_guard(mutex_intr, goto err_device_del, &input_mutex) {
+		/* Keep seeded state, but do not replay pre-registration events. */
+		scoped_guard(spinlock_irq, &dev->event_lock) {
+			dev->num_vals = 0;
+			dev->timestamp[INPUT_CLK_MONO] = ktime_set(0, 0);
+		}
+
 		list_add_tail(&dev->node, &input_dev_list);
 
 		list_for_each_entry(handler, &input_handler_list, node)

[PATCH 2/2] Input: test state seeding across device registration

[Karlos Abel]

Add KUnit coverage for input events used to initialize device state before
registration. Register a handler for a virtual switch/LED device, seed a
switch before input_register_device(), and inject a later LED update and
SYN_REPORT. Verify that the initial state is retained without replaying
its event or reusing its timestamp, and that a real later change arrives.

Exercise both the original event buffer and registration with a larger
buffer. Also verify preservation and subsequent delivery of absolute-axis
state in the resizing case. Use SW_DOCK to avoid real radio operations.

These tests depend on the preceding pre-registration event fix. Against
the unpatched input core, the non-resizing case delivers one stale switch
event and both cases retain the initialization timestamp. Both tests pass
with the fix, together with the four existing input-core tests.

Assisted-by: LLM
Signed-off-by: Karlos Abel <kabel@voidship.net>
---
 drivers/input/tests/input_test.c | 168 +++++++++++++++++++++++++++++++
 1 file changed, 168 insertions(+)

diff --git a/drivers/input/tests/input_test.c b/drivers/input/tests/input_test.c
index e105ce71a..889d9e7ec 100644
--- a/drivers/input/tests/input_test.c
+++ b/drivers/input/tests/input_test.c
@@ -161,11 +161,179 @@ static void input_test_grab(struct kunit *test)
 	input_put_device(input_dev);
 }
 
+struct input_seed_test {
+	struct input_dev *dev;
+	struct input_handler handler;
+	struct input_handle handle;
+	unsigned int switch_events;
+	unsigned int abs_events;
+	ktime_t led_timestamp;
+	bool connected;
+};
+
+static void input_seed_event(struct input_handle *handle, unsigned int type,
+			     unsigned int code, int value)
+{
+	struct input_seed_test *seed = handle->private;
+
+	if (type == EV_SW && code == SW_DOCK)
+		seed->switch_events++;
+	if (type == EV_ABS && code == ABS_X)
+		seed->abs_events++;
+	if (type == EV_LED && code == LED_NUML)
+		seed->led_timestamp = input_get_timestamp(handle->dev)[INPUT_CLK_MONO];
+}
+
+static bool input_seed_match(struct input_handler *handler,
+			     struct input_dev *dev)
+{
+	struct input_seed_test *seed = container_of(handler, struct input_seed_test,
+						  handler);
+
+	return seed->dev == dev;
+}
+
+static int input_seed_connect(struct input_handler *handler,
+			      struct input_dev *dev,
+			      const struct input_device_id *id)
+{
+	struct input_seed_test *seed = container_of(handler, struct input_seed_test,
+						  handler);
+	int error;
+
+	seed->handle.dev = dev;
+	seed->handle.handler = handler;
+	seed->handle.name = "input-seed-test";
+	seed->handle.private = seed;
+	error = input_register_handle(&seed->handle);
+	if (error)
+		return error;
+
+	error = input_open_device(&seed->handle);
+	if (error) {
+		input_unregister_handle(&seed->handle);
+		return error;
+	}
+
+	seed->connected = true;
+	return 0;
+}
+
+static void input_seed_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+}
+
+static const struct input_device_id input_seed_ids[] = {
+	{ .flags = INPUT_DEVICE_ID_MATCH_BUS, .bustype = BUS_VIRTUAL },
+	{ }
+};
+
+static void input_test_seed_events(struct kunit *test, bool resize)
+{
+	const ktime_t seed_timestamp = ktime_set(123456, 789);
+	struct input_seed_test *seed;
+	int error;
+
+	seed = kunit_kzalloc(test, sizeof(*seed), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, seed);
+	seed->dev = input_allocate_device();
+	KUNIT_ASSERT_NOT_NULL(test, seed->dev);
+
+	seed->dev->name = "Input pre-registration events";
+	seed->dev->id.bustype = BUS_VIRTUAL;
+	input_set_capability(seed->dev, EV_SW, SW_DOCK);
+	input_set_capability(seed->dev, EV_LED, LED_NUML);
+	/* An ABS axis also raises the estimated event-buffer size. */
+	if (resize) {
+		input_set_abs_params(seed->dev, ABS_X, 0, 100, 0, 0);
+		seed->dev->hint_events_per_packet = 128;
+	}
+
+	seed->handler.event = input_seed_event;
+	seed->handler.match = input_seed_match;
+	seed->handler.connect = input_seed_connect;
+	seed->handler.disconnect = input_seed_disconnect;
+	seed->handler.name = "input-seed-test";
+	seed->handler.id_table = input_seed_ids;
+	error = input_register_handler(&seed->handler);
+	KUNIT_EXPECT_EQ(test, error, 0);
+	if (error)
+		goto free_device;
+
+	/* Initialize state before registration, without a SYN_REPORT. */
+	input_set_timestamp(seed->dev, seed_timestamp);
+	input_report_switch(seed->dev, SW_DOCK, 1);
+	if (resize)
+		input_report_abs(seed->dev, ABS_X, 42);
+	error = input_register_device(seed->dev);
+	KUNIT_EXPECT_EQ(test, error, 0);
+	if (error)
+		goto unregister_handler;
+
+	KUNIT_EXPECT_TRUE(test, seed->connected);
+	if (!seed->connected)
+		goto unregister_device;
+
+	KUNIT_EXPECT_TRUE(test, test_bit(SW_DOCK, seed->dev->sw));
+	if (resize)
+		KUNIT_EXPECT_EQ(test, input_abs_get_val(seed->dev, ABS_X), 42);
+	KUNIT_EXPECT_EQ(test, seed->switch_events, 0);
+	KUNIT_EXPECT_EQ(test, seed->abs_events, 0);
+
+	/* A later LED write must not replay the initialization events. */
+	input_inject_event(&seed->handle, EV_LED, LED_NUML, 1);
+	input_inject_event(&seed->handle, EV_SYN, SYN_REPORT, 0);
+	KUNIT_EXPECT_EQ(test, seed->switch_events, 0);
+	KUNIT_EXPECT_EQ(test, seed->abs_events, 0);
+	KUNIT_EXPECT_NE(test, seed->led_timestamp, seed_timestamp);
+	KUNIT_EXPECT_NE(test, seed->led_timestamp, ktime_set(0, 0));
+
+	/* Genuine post-registration state changes must still be delivered. */
+	seed->switch_events = 0;
+	seed->abs_events = 0;
+	input_report_switch(seed->dev, SW_DOCK, 0);
+	if (resize)
+		input_report_abs(seed->dev, ABS_X, 77);
+	input_sync(seed->dev);
+	KUNIT_EXPECT_EQ(test, seed->switch_events, 1);
+	KUNIT_EXPECT_EQ(test, seed->abs_events, resize ? 1 : 0);
+	KUNIT_EXPECT_FALSE(test, test_bit(SW_DOCK, seed->dev->sw));
+	if (resize)
+		KUNIT_EXPECT_EQ(test, input_abs_get_val(seed->dev, ABS_X), 77);
+	input_inject_event(&seed->handle, EV_SYN, SYN_REPORT, 0);
+	KUNIT_EXPECT_EQ(test, seed->switch_events, 1);
+	KUNIT_EXPECT_EQ(test, seed->abs_events, resize ? 1 : 0);
+
+unregister_device:
+	input_unregister_device(seed->dev);
+	input_unregister_handler(&seed->handler);
+	return;
+
+unregister_handler:
+	input_unregister_handler(&seed->handler);
+free_device:
+	input_free_device(seed->dev);
+}
+
+static void input_test_seed(struct kunit *test)
+{
+	input_test_seed_events(test, false);
+}
+
+static void input_test_seed_resize(struct kunit *test)
+{
+	input_test_seed_events(test, true);
+}
+
 static struct kunit_case input_tests[] = {
 	KUNIT_CASE(input_test_polling),
 	KUNIT_CASE(input_test_timestamp),
 	KUNIT_CASE(input_test_match_device_id),
 	KUNIT_CASE(input_test_grab),
+	KUNIT_CASE(input_test_seed),
+	KUNIT_CASE(input_test_seed_resize),
 	{ /* sentinel */ }
 };